1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Bomba de vacio P1-N
1 x Horn de mando 5/10 con rótula M2
2 x Arandela conica alumino M3 negro (8 pcs)
1 x Ferrita 17x10x6.5 mm
1 x Cartuchos de humo AX-60 rojo (5 pcs)
1 x CC 05
1 x Prisionero aluminio 4 mm Ø (4 uds)
1 x Combo 4 pcs AXI 2204 Multicopter
1 x Set piñones servo HITEC HS-65 HB
1 x Set piñones servo HITEC HS-56 HB
1 x Brazo servo 30 mm Futaba con rótula M3
1 x Brazo servo aluminio V2-Hitec 1,0" M3 azul
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Plancha carbono 350x150x1.0 mm
1 x Set piñones servo HITEC D645 MW
2 x Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x Arrancador 12v (Max 90 and 15ccm)
1 x Goma arrancador KAVAN "hard"
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Punta recambio soldador KAVAN 668838
1 x Funda plancha entelar STD
1 x Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x Hoja sierra 65mm 160 Dientes para OZI/E
1 x Bisagra larga con pin metalico (12 uds)
1 x Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x Hoja sierra PROXXON (50mm-100T) para KS-230
1 x Set bisagras indoor con horns integrados
1 x PVC termo-retráctil batería 68 mm transparente (1 m)
1 x Termo-retráctil verde tubo de 6,4x1000 mm 2:1
1 x Ply-Span 450x600/13g Blanco
1 x PVC termo-retráctil batería 57 mm amarillo-naranja transparente
1 x Camara 800 TVL CMOS para FPV
1 x Brazo servo 38 mm Futaba con rótula
1 x Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x Brazo servo aluminio V3-Hitec 1,25" M3 azul
1 x Servo MKS 6100 DS
1 x Servo HITEC HS-225 MG
1 x Servo GO-1053 MG 20.0kg
2 x Brazo servo aluminio V1-Futaba 15 mm M2 rojo
2 x Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x Servo MKS HV747
2 x Bisagra papel lite CA (12 uds)
2 x Servo FUTABA BLS 276SV
2 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Piñones SAVOX SH-0350
2 x Servo HITEC HS-225 BB
1 x Tapa de servo micro 58 mm
1 x Soporte servo KST X10 mini / DS135MG
1 x Servo GO-09 9g
1 x Servo SAVOX SV-1260 MG
1 x Brazo de servo 50 mm con rodamiento (2 pcs)
1 x Servo GO-1013 MG 3.8kg
1 x Set piñones servo HITEC HS-7950TH
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Brazo servo aluminio V2-Futaba 17 mm M2 rojo
2 x Servo FUTABA BLS173 SV
1 x Brazo servo 38 mm Hitec
1 x Brazo servo doble aluminio FUTABA 40 mm M3 F3A rojo
1 x Brazo servo Savox SH-82 aluminio
1 x Servo SAVOX SV-1261 MG
1 x Tapa de servo mini 65 mm
1 x Brazo servo 17 mm con rótula FUTABA
1 x Brazo servo aluminio V1-JR 1,25" M3 oro
1 x Bisagra papel CA (12 uds)
2 x Bisagra PIN mediana (12 uds)
2 x Bisagra 18 mm reforzada
1 x Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x Bisagra de compuerta/Flaps
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DUPLEX 2,4 EX MBar
1 x Bateria RX JETI LiIon RB 5200 7.2v
1 x Arandela de goma M3-M4 (8 pcs)
1 x Brazo servo aluminio V1-Futaba 1,25" M3 rojo
1 x DUPLEX 2.4EX MAlti (Rev.2)
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x Condensador AddCAP 10AS
1 x DUPLEX 2.4EX MULi 6s M
1 x Car Charger DC/DS-16
1 x Cono hélice fija 60 mm diámetro / eje 5,0 mm
1 x Shaft sleeve LAMA
1 x Brazo servo aluminio V1-Futaba 23 mm M2 rojo
1 x Arandela conica ancha alumino M4 Negro (4 pcs)
1 x Bancada receptor (Azul)
1 x Bancada montaje servo S (rojo)
1 x Bancada montaje servo M (azul)
1 x Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x Servo RHINO pro SHV digi 4
1 x Sebart 2.2 m AMARILLO/NEGRO (SebART)
1 x Set piñones servo HITEC HS-85
1 x Brazo doble de servo 89 mm con rodamiento (2 pcs)
1 x Servo HITEC HS-65 HB
1 x Sukhoi 29S 2,6 m Amarillo/Negro (SebART)
1 x Servo HITEC HS-65 MG
1 x Inversor de servo
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x Brazo servo aluminio 20-25 mm Futaba/MKS/Savox
1 x Servo SAVOX SV-0236 MG HV
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Camara USB micro endoscopica
1 x Bisagra Redonda flexible (12 uds)
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Bisagra correa de latón en miniatura 1m
1 x Ball link aluminio M3 V1 (10 pcs)
1 x Brazo servo doble alu. RHINO
1 x Servo HITEC HS-635HB Carbonite
1 x Set piñones servo HITEC HS205/225MG/5245MG/7245MH
1 x Programador HITEC DPC-11
1 x Servo DITEX EL0510M
1 x Servo HITEC HSB-9360TH
1 x Sensor velocidad + Vario MULTIPLEX
2 x Set piñones servo HITEC HS-225
2 x Set piñones servo HITEC HS-81
2 x Caja servo HS-225MG/225BB/5245MG
2 x Servo HITEC D645 MW
1 x Bisagra larga con pin metalico (6 uds)
1 x Bisagra pequeña con pin metalico (12 uds)
1 x Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x Servo HITEC HS-7245MH
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x Programador HPP-21 PLUS HITEC digital servos PC
1 x Servo HITEC HS-5805 MG Digi
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
2 x Set piñones servo HITEC HS-125MG/5125MG
1 x ARS 300 91" ARF 2311mm ORANGE
2 x Set piñones servo HITEC HS-311/322/325BB
1 x Servo FUTABA HPS-A700 Digital S-Bus
1 x Servo FUTABA S 9670 SV
1 x Programador FUTABA USB CIU-3
1 x Servo FUTABA BLS172 SV
1 x Soporte Guia Antena doble
1 x Programador HPP-21 PLUS HITEC digital servos PC
12,280.41EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas