Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » ROI142KS

15.06EUR

Opto Gas Engine Kill Switch
[ROI142KS]

This kill switch is Optically Coupled to isolate your ignition system from your radio system. (No Interference!!) this device features the following:

•Includes a remote mountable bright LED to indicate when the ignition is armed.
• Optically Coupled input/output is Isolated.
• 8 Bit PIC Controller.
• Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input.
• Up to 20 Volt 15 amp MOS-FET output.
• DSP Noise/Loss of signal Filtering.
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires, universal connectors.
• Small and light weight – only 12 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

few units

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 few units	Propeller MENZ-S 18x12 few units	Cylidric hinge 33 mm Ø 2 mm (5 pcs) few units
MPS Gas-Cap-Powerswitch few units	Cyano SUPER - GOLD™ (12g) few units	Propeller MENZ-S 18x8 few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x
1 x	Me-163
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Cable coupler M3 (10 uds)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Circlick securite
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Oracover Azul Cielo 2 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Straightened threaded rod M2-1m
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	6,4x1000 mm 2:1 black termoretract tube
2 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	BEC 3A FOXY
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Cabel "Y" 15 cm
1 x	Oracover Azul 2 m
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Vasa model Catapult
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
2 x	Blades 330mm
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Ball Link Plier
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Conector JR Servo female (10 pcs)
1 x	1/6 Pilot "Buddy"
1 x	Piloto Jet "Green" 1/6 Scale
1 x
1 x	Dean-T Plug Mold
1 x	Concave-Convex sandpaper file 13 mm
1 x	Conector MT-60 (pair)
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	1/12 Pilot "Tom"
1 x	1/7 Pilot "Japanese"
1 x	Connectors banna oro 2 mm (M/F)
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Conector Servo female 4 pines
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Connector CAN 15
1 x	1/12 Pilot "Fighter"
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	1/6 Pilot "Garry"
1 x	30 cm MULTIPLEX female connector
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	2,5x60 mm allen screwdriver
1 x	Conector XT-30 (macho)
1 x	25 mm Sandpaper file
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Conector JR Servo female (10 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Motor OS 3820-1200 electric
1 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	CM-3
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Connector Sub-D 2+5 Male
1 x	CC 01
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Connector Sub-D 2+5 Female
1 x	Adapter lead MPX/EC3
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	DPSI Ampere battery backer
1 x	2 LiPo XH>EH adapter
1 x	Cabling for Fox MDM1 wings
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	XT-60 connector (female)
1 x	63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	XH male balance (3S) connector (2 pcs)
1 x	Bungee HLG Premium
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	Dremel PERMAGRIT thin lime
1 x	3,0x60 mm allen screwdriver
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Motor KAVAN PRO 2225-1600
1 x	Program card KAVAN PRO
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 02
1 x	CC 03
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Dean "T" - Futaba Adapter
1 x	30 cm BEC cable (female)
1 x	Battery charging cable XT60
1 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Double conector with JR adapter and 200 mm extension

2,572.92EUR