Top » Catalog » Planes » Electric » Acrobatics » Planes » ROBBEFPM4270A

399.00EUR

MAMBA 10 G2 PNP
[ROBBEFPM4270A]

Description "Premier Aircraft Mamba 10 G2 Super PNP Red"

Everyone wants more power and more flight time for their RC gliders, but the increase in performance has always been limited by the power supply system and the 3S (11.1V) Li-Po's they normally use. To get back to basics, the Flex innovation team started with a new idea: to use a completely new developed power system with a small, lightweight and cost effective 6S (22.2V) Li-Po to completely revolutionize the performance of 10 class aircraft. What does this mean for you? No more dreams, you really get it all! More power. More flight time. And above all: More fun!
The Mamba series biplanes were designed by F3A and 3D aerobatic world champion Quique Somenzini, and are among the most popular and powerful 3D aerobatic aircraft of all time. The Mamba 10 G2 takes this proven performance and success story to the next level. From the craziest XA to the smoothest 3D and precision, the Mamba 10 G2 combines explosive power with extended flight times in a package that stays light so you can get the most out of it.

Features:
- Extreme 3D and XA performance combined with good-natured performance at slow speeds
- New 6S (22.2V) Li-Po power supply system for more power and more flight time
- (6) Installed High Voltage DS17 servos that provide incredible torque and speed for a better feel at the stick
- Designed by F3A World Champion Quique Somenzini
- The advanced flight stabilisation system Aura 8 improves the flight considerably
- Flex 12 x 5E lightweight wooden propeller provides excellent thrust and fast throttle response
- Crow (air brakes) is activated by default and provides additional fun. A mix in the transmitter is not necessary!
- Shark Teeth leading edges provide better aileron control and help to reduce stalls and wing swings in high alpha flight.
- Innovative plywood subframe with easily removable battery compartment
- The Potenza 20-3D 600Kv engine is optimised for 6S (22.2V) Li-Pos and XA/3D aerobatics
- ZTW 50A ESC with 7.4V, including 5A BEC
- Upper and lower wing in one piece
- Factory applied decor

Technical data
Airfoil: -
Ausführung: PNP - PLUG N PLAY
Bauerfahrung: Anfänger
Control: H,S,Q,M,LK
Drive Type: Electro
Empty weight approx. (g): -
Flight weight approx. (g): 1540
Flugerfahrung: Fortgeschritten
Fuselage: EPO
Länge (mm): 1102
Manufacturer: Premier Aircraft
Wing-span (mm): 1033
Wings: EPO
empf.Akku: 6S/1300-1500mAh LiXX
empf.Motor: Potenza 20-3D 600Kv Motor inklusive

Box contents
- Mamba 10 G2 PNP model pre-assembled
- Potenza 20-3D 600Kv motor for 6S (22.2V)
- Aura 8 Advanced flight stabilisation system
- 6 pcs. DS17 HV servos installed
- ZTW 50A ESC 7,4V, 5A BEC controller
- Flex 12x5E wood propeller
- easily removable battery cover
- Shark Teeth on the leading edge of the surface
- Building instruction English

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
    Acrobatics->
      Planes
      Spare Parts
    F3A->
    Seaplanes
    Indoor
    Models
    Park Flyer
    Pylon
    Sport-Trainer
    Turbine
  Gasoline-Glow->
  Turbine->
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Spray adhesive AEROFIX 2
2 x
4 x	1000 ml sealer (DOPE)
2 x	Spray YELLOW Inca Lexan 150ml
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
3 x	Presto SF Light Filler styrene-free (420 g)
1 x	Nitroverdu 500 ml
1 x	Universal Colour Paste deep black 50 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
3 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
3 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Strip 2,5x1,25x330 mm
1 x	Round Rod 2,5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 3,0x1000 mm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Profile ABS half cane 3x1000 mm
1 x	Tape GFK 38 mm
1 x	Support Filtro FESTO
1 x	Support FUEL DOT V3
2 x	Recessed MPX connector support (6 pcs)
2 x	Support conector MPX (6 pcs)
2 x	Carbon plate 350x150x1.0 mm
1 x	Release wax 250ml
1 x	Solvent Plasti Dip 1000 ml
1 x	500 ml sealer (DOPE)
1 x	20 g tin paste
2 x	PARTALL® Hi-Temp Wax, 340 g
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Buy Perforated film 100 cm / 20 m
1 x	Spray EC Red 400ml
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Glass fibre sleeve Ø 20 mm
1 x	Release film 100 cm x 50 m
2 x	Styrene plate 320x120x0.5 mm
2 x	Chopped glass fibre strands 3 mm
2 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	PVC grid diagonal 290x185x0.32 mm
2 x	Styrene plate 320x120x1.0 mm
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Chopped glass fibre strands 3 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
2 x	Carbon plate 350x150x4.0 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Chopped glass fibre strands 0.2 mm
1 x	Carbon plate 550x350x2.5 mm ECOTECH
2 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
2 x	Foam plastic plates (310x210x5 mm)
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Foam plastic plates (310x210x8 mm)
1 x	Carbon plate 350x150x1.5 mm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
2 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Support ECU Xicoy X-45
1 x	Angle support XT60 conector
1 x	Support XT60 conector (2 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support Pitot JETI
1 x	Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x	Painting GHT Lexan Black 150 ml
1 x	Spannlack 1000 ml
1 x	Spray Graphit 33
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Actrocon 30A ESC
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Indoor Brushed motor kit
1 x	Regulador XC4018BA V2 (40Amp)
1 x	PPS-4D Propeller
1 x	KOBY 70 LV Esc
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	JIVE 80+LV Esc
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	FOXY G2 C3530-700
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Rudder 2_Tray 4~4.5 inch
1 x	Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt)
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	28 mm tailwheel unit
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	Crystal Universal RX 35.130 Ch 73
1 x	Glass fabric 25 g/m² (1 m²)
1 x	KOLIBRI 90 LV-I Esc
1 x	ESC KOLIBRI 140 HV-I
1 x	Esc KOSMIK 160 HV
1 x	Micro Crystal RX 35.120 Ch 72
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Power MULTIlight
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Secraft Fuel system v2, red color
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Rudder 2_Tray 4.5~5 inch
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Receiver bed (Blue)
1 x	Motor mount M
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Servo Mount M (blue)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Marker ties (20 pcs)
1 x	Crystal Universal RX 35.050 Ch 65
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Crystal Universal RX 35.120 Ch 72
1 x	FunCub NG verde RR
1 x	DRACO 2.0m Wheel set
2 x	Avanti S 1.8m Jet White/Blue + Landing gear
2 x	Avanti S 1.8m Jet White/Blue
2 x	de Havilland Vampire (Rc Factory)
2 x	Mini Avanti S 1.4m blue/white/red CLASSIC
1 x	Glases Flitemaster
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	BULLIT Wing 840 mm
1 x	Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
1 x	Mini AVANTI S EDF 80MM RTF

22,053.52EUR