430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Ventus 1:4 set of instruments
1 x L-Connector 1.0 mm x 1000 mm
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
1 x T-Connector 4.0 mm x 1000 mm
1 x Horn for flap control (1 pcs)
1 x DYNAMOMETER S-1580
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Suncover 100cc Red
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x Jeti Black cap
1 x Control horn long w/ball
1 x Long extra-strong control horn with bearing 2,8x34
1 x 5 mm M2 variable inclined horn
1 x 6 mm M3 variable inclined horn
1 x 6 mm M3 variable horn
1 x Micro control horn (2 pcs)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Rudder forward 90x28 "type Kato"
1 x Horn mando small (2 pcs)
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 12.0x10.0x1000 mm
1 x Indoor hinge with servo arm integraded
1 x Rudder forward 70x28 "type Kato"
2 x ABS tube 5.0x3.0x1000 mm
1 x Landing gear axle Ø 8 mm (2 uds)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
2 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
2 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x SE Ring 350 mm (2 pcs)
2 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Ball link M3 (10 pcs, flat ball)
1 x Long ball link M1.6 (6 uds)
1 x Long ball link M2 (6 uds)
1 x Ball link M3 RPA's-UAV's
1 x Joint with bearing M2 22x5,5
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Ball link M2 (10 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Short ball link M2 (6 uds)
1 x Socket head ball link M3 (2 uds)
1 x Ball link M2,5 (10 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x 6 mm ball link M3 (10 pcs)
2 x Short ball link M1.6 (6 uds)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M3 Maxi ball link (2 uds)
2 x Socket head ball link M3 (2 uds)
1 x M3 Maxi ball link (2 uds)
1 x Long ball link M3 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x M3 Maxi ball link (2 uds)
1 x Joint with bearing M2,5 22x5,5
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
2 x M2 5Diam black ball link V2 (2 pcs)
1 x Ball link M3 (6 uds)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Joint with bearing M3 22x5,5
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Tape GFK 50 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Propeller APC 10x5 Electric Pusher
1 x Propeller electric carbon 9.5x6
1 x 16x10 tree blades propeller Master Airscrew
1 x Propeller POWER-PROP 12x6
1 x 29,0 mm propeller (left propeller)
1 x 14 mm portholes (10 pcs)
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 13x10 Electric
1 x Propeller 9x4,7 SlowFlyer
1 x Cooler motor type 280
1 x Propeller 3x3
1 x 250 mm / 16 mm Airbrakes
1 x Propeller APC 12x6 Electric Pusher
1 x Propeller electric carbon 7x7
1 x Propeller electric carbon 8.5x7
1 x 300x4 mm M4 shaft ship
1 x 25 mm fenders (10 pcs)
1 x 2.3 mm Adapter for 30 mm spinners
1 x 12x8 tree blades propeller
1 x Propeller APC 10x7 Electric
1 x Propeller electric carbon 10x8
1 x Propeller electric carbon 8.5x5
1 x Propeller APC 10x4.7 SF
1 x Porpeller HUNTER 480
1 x 8x6 tree blades propeller
1 x 3 mm Prop Adapter M6
1 x 12 mm mast holder
1 x Propeller POWER-PROP 10x7
1 x Propeller APC 12x6 Electric
1 x 12 mm portholes (10 pcs)
1 x 12x6 tree blades propeller
1 x Propeller APC 12x3.8 SF
1 x Propeller electric carbon 8.5x6
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller POWER-PROP 13x9
1 x 3.2 mm Prop Adapter M8
1 x 290 mm 8x4 M4 shaft ship
1 x Propeller electric carbon 10.5x6
1 x Propeller APC 12x8 Electric
1 x Propeller APC 10x10 Electric
1 x 3,2 mm Prop Adapter M8
1 x Propeller POWER-PROP 13x9 Izda
1 x 29,0 mm propeller (rigth propeller)
1 x Propeller APC 12x8 SF
1 x 15x7 tree blades propeller LEFT
1 x Ball Bearing Oil 25 ml
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Silicone red 0,25 mm² wire (25 m)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x ABS tube 6.0x5.0x1000 mm
1 x Cabel "Y" 30 cm (graupner)
1 x Fiberglass tube 6/4x1000mm
1 x ABS tube 20.0x18.0x1000 mm
1 x Propeller 8x4,3 SlowFlyer
1 x Cooler motor type 300
1 x Crystal Universal RX 35.130 Ch 73
1 x Servo NARO Max Std
1 x Fuel bottle 500 ccm
1 x Conector MT-60 (pair)
1 x Charger SKY RC e680
1 x Ciano KAVAN Thick 20g
1 x Engine mounts for .09 - .19 engine
1 x Conector MR-60 (pareja)
1 x Pin hinge 39x20 mm (10 uds)
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x 10 mm aluminium spinner (Kavan)
1 x Ciano KAVAN Medium 20g
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Bungee HLG Premium
1 x IMPULSE 2 F3F
1 x ABS tube 3.0x2.0x330 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x White silicone 0,25 mm² wire (25 m)
1 x 2 LiPo XH>EH adapter
1 x ABS tube 2.0x1.0x1000 mm
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x ABS tube 3.0x2.0x1000 mm
1 x White silicone 0,25 qmm wire (150 m)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x PVC 0,08 qmm Futaba servos wire (5 m)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x ABS tube 8.0x6.0x1000 mm
1 x 30 cm BEC cable (female)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x ABS tube 7.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Cable Cargador FUTABA
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Cabel charger transmitter GRAUPNER
1 x JR silicone servo wire 0,35 qmm / 5m
1 x 3 LiPo XH>EH adapter
1 x ABS tube 4.0x3.0x1000 mm
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x 30 cm BEC cable (male)
1 x 5 LiPo XH>EH adapter
1 x ABS tube 9.0x7.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x KAVAN CA Activator 150ml
5,100.94EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies