1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Propeller FALCON 32,5x11 PUSHER Carbono
2 x Small Crow DLE-170M
1 x Motor DLE 200cc Std
3 x Silent-blocks DLE 170M
2 x Big Crow DLE-170M
2 x Motor DLE 200cc Premium Muffler
1 x Tube Pitot to PIXHAWK
1 x Extension 15 cm (Futaba)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x Cabel "Y" 15 cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x Extension silicon 30 cm male (Futaba)
1 x Extension PVC 150 cm (Graupner)
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 10 cm (Graupner)
1 x Cable S.BUS 3 salidas 100 mm
1 x Futaba male 40 cm extension
1 x Prolongador S-Bus JR/JR 20cm
2 x Extension 90 cm (Futaba)
2 x Anodized aluminium servo M3x16 screw (4 red pcs)
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Brass control horn M3 short for wire (2 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x Cabel "Y" 30 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Extension 6 lipos XH > EH
1 x Extension 2/3 lipos JST/C
1 x DPSI magnetic switch actuator (housing)
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x PSC 6
1 x MAX BEC 2
1 x UBEC 6A KAVAN
2 x Opto Gas Engine Kill Switch
2 x Propeller balancer
1 x 3,2 mm Prop Adapter M6
1 x 2.3 mm Adapter for 30 mm spinners
1 x 3 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
1 x Premium servo extension 100cm
1 x Extension silicon 30 cm female (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension silicon 35 cm male (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x MAX BEC 2D plus EX
1 x Pins M connect Multipin connectors AWG 20-24
1 x SWTU2 switch
1 x Motor DLE 170 M- Paramotors
1 x Motor DLE 430 cc - Paramotors
1 x Battery LiPo GRE18 600 mAh 7.4v
1 x Birch plywood plate 600x300x1.2 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Crawler GRE-24 RTR 1:24 Arena
1 x 55 mm aluminium spinner (Kavan)
1 x Conector MR-60 (pareja)
1 x 60 mm aluminium spinner (Kavan)
1 x Ciano KAVAN Thick 20g
1 x 
1 x Ciano KAVAN Thin 20g
2 x Angle of incidence meter
1 x FESTO connector M7 Quick 4mm 90º
1 x Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x Cooler motor type 300
1 x Axle for motor A20-S (3 uds)
1 x Motor A20-20 L EVO
1 x Selfstart electronic switch
1 x PSC 5
1 x Ballast 700gr OPALE
1 x Surface Indicator Gauge Small
1 x WingFix ULTRA Black Edition
1 x Truck-trailer for gliders 720 x 285 mm
1 x Red smoke bombs AX-60 (5 pcs)
1 x White silicone 0,25 qmm wire (150 m)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Check valve quick hose connector 4-4 mm
1 x Quick hose connector 6-6 mm
1 x Propeller 11x4,7 SlowFlyer
1 x Motor holder AXI
1 x Combo FOXY C3530-570 + FOXY 80 amp
1 x Propeller 9x4,7 SlowFlyer
1 x Motor A10-7 L 4,4:1
1 x Backmountset complete A40
1 x Horn with ball 55x40
1 x A30-M/L/XL Backmountset complete
1 x SPS 70V 100/200 A
1 x SPARK Switch 7.4v
1 x Multi-adapter balancer JST - TP
1 x TP/TopFuel - XH 2/3S Adapter
1 x SPARK Switch 5.9v
1 x SPS Remote switch actuator
1 x Multi-adapter balancer JST/C - TP
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Parachute PV6 for F3J
1 x Paramotor BackPack XXS (without accessories)
1 x Opale Rucksack
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Para-RC Mix
1 x Windsock Ozone L -1200 mm
1 x Trike XL motor set (motor+esc+prop)
1 x MAX pilot ARTF
1 x Field folding model stand SebArt
1 x Truck-trailer for gliders 720 x 239 mm
1 x Propeller balancer
1 x Propeller FIALA 15x8 3-Blade
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Ventral support for AX-18/AX-60
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x USB Interface REVOLECTRIX for CellPRO 10s
19,570.72EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies