Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001001

28.00EUR

Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
[R1001001]

Epoxy Resin L + Hardener S (15 min)
Set of two components
Free from nonylphenol, benzyl alcohol and DETA
Low viscosity, solvent- and filler-free
Fast impregnation of glass, aramid and carbon fibres
High static and dynamic strength
Low surface tension, good adhesion and low curing shrinkage
Ideal for bonding wood, metal, Styropor® etc.
Epoxy resin L with the corresponding hardeners is the most frequently used laminating and bonding resin from the R&G product range.
Epoxy resin L with Hardener S has similar mechanical properties to the laminating systems commonly used in aircraft construction.
Processing time: 15 minutes (100 g / 20 °C)
Mixing ratio: 100 : 40 parts by weight Epoxy Resin L : Hardener S
100 : 45 parts by volume Epoxy Resin L : Hardener S
Curing time (at 23 °C): 16 - 24 hours
Cold hardening, hardens from 5 °C (low temperature hardener)
Heat distortion temperature: Approx. 65 °C

few units

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Solvent Plasti Dip 1000 ml
2 x	Spannlack 1000 ml
2 x	Hobbylite Filler, Balsa colour
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Nitroverdu 500 ml
1 x	Universal Colour Paste white 50 g
2 x	Plasti Dip Liquid Tape 429 ml orange
1 x	1000 ml sealer (DOPE)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
2 x	Paint gun for sprays
1 x	Plasti Dip Liquid Tape 429 ml black
2 x	Spray EC Red 400ml
2 x	Painting GHT Lexan Black 150 ml
2 x	500 ml sealer (DOPE)
1 x	Universal Colour Paste deep black 250 g
2 x	Presto SF Light Filler styrene-free (420 g)
2 x	Pilot "Adolf" Legends Series (Slimline)
3 x	1/7 Pilot "Japanese"
1 x	1/6 Pilot "Tony"
1 x	1/6 Pilot "John"
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
3 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
2 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	Civilian pilot "Joe" size 9cm (Slimline)
3 x	1/12 Pilot "Tom"
2 x	1/4 Pilot "Mike"
1 x	Pilot "Anthony" (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	Rescue 1,8m2 / BackPack
1 x	Paramotor Trike XL
1 x	Paramotor BackPack XXS (without accessories)
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Wing OXY 5,0 m2
1 x	Windsock Ozone L -1200 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	25 mm reinforced hinge
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Servo NARO Max Std
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	Hovercraft sailcloth
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Long pinned hinge (6 uds)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Micro flex hinge (12 uds)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Flap hinge (6 pcs)
2 x	Gates hinge aluminium (1 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Electric rocket starters (6 pcs)
1 x	Extension silicon 10 cm (Futaba)
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Oracover CHROME 2m
1 x	ABS tube 8.0x6.0x1000 mm
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	12 mm mast holder
1 x	2,3 mm Prop Adapter M6
1 x	16x10 tree blades propeller Master Airscrew
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Piloto jet 130 mm
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Pilot JAN 1/4 Saiplanes
1 x	Piloto JET 1:3,5
1 x	1/6 Pilot "Buddy"
1 x	Shirt Hispano Aviación
1 x	Spray Graphit 33
1 x	Spray adhesive AEROFIX 2
1 x	Small flex hinge (12 uds)
1 x	Indoor hinge with servo arm integraded
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Gold aluminium servo arm V2-JR 1,5" inch M3
1 x	Red aluminium servo arm V2-Futaba 17 mm iM2
1 x	Servo holder for retract
1 x	Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Professional Servo tester
1 x	Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x	FUTABA 6L + R3106 2.4GHz
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Red aluminium double servo arm FUTABA 40 mm M3 F3A
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	9x4.7 * 22x12 carbon propeller
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	USB Adaptor OPTronics
1 x	Battery charging cable XT60
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	3 LiPo XH>EH adapter
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Propeller APC 11x7 Electric
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	Propeller APC 10x10 Electric
1 x	1/12 Pilot "Fighter"
1 x	Propeller APC 11x4.7 SF Pusher
1 x	1/6 Pilot "Garry"
1 x	Adapter 4,0 mm M8
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Charger ISDT 608AC 200W
1 x	20-25mm Servo Arm
1 x	Fundas para el transporte F3A alas
1 x	Servo KST MS825 V8.0 35kg 8.4v
1 x	LASER 260 60" V2 ARF Yellow (SkyWing)
1 x	Motor KAVAN PRO 2225-1600
1 x	Mobile Terminal
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x	Pilatus PC-21 50E RED/WHITE (SebArt)
1 x	ANGEL 48" pp orange/black/white

9,639.08EUR