119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors banna oro 8,0 mm (M/F)
1 x Silicone red 4,0 qmm wire ( 1 m)
1 x Oracover CARBON Metalic 1 m
1 x Silicone black 4,0 qmm wire ( 1 m)
1 x Block 1Rolle 5x7x3 mm (5 pcs)
1 x Male connector for 20 pines AWG
1 x Silicone red 6,0 qmm wire (25 m)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Hovercraft sailcloth
1 x Servo NARO Max Std
1 x Motor DLE 200cc Std
1 x FALCON 20X9 CARBON PROPELLER (GAS)
2 x HBC 10035-3 32-Bit
2 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Cap Hispano Aviación
1 x Remote electric ignition system
1 x Albatros ,spare cockpit (Top Model)
1 x Ball link M3 (10 pcs, flat ball)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x Central piece 3Bl 47 mm 0º
2 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Central piece 62 mm 0º
1 x Central piece 72 mm 0º
1 x Red smoke canister 65 g
1 x 30 cm BEC cable (male)
1 x Short ball link M1.6 (6 uds)
1 x ARTIST 1.560 mm
1 x 50 mm white plastic spinner for folding propeller
1 x 7 mm gas motor standoff
2 x Avia (Top Model)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Electric spoiler 185 mm (2 pcs)
2 x Albatros red/white (Top Model)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Central piece 52 mm - 5º
1 x 90x75 mm standart servo cover
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Joint with bearing M2 22x5,5
1 x 40 mm black plastic spinner for fixed propeller
1 x TAKEO 3.6m electric
1 x 30 cm BEC cable (female)
1 x Red smoke bombs AX-60 (5 pcs)
1 x entral piece 3Bl 42 mm 0º
2 x PCARD Wireless System
2 x Avia spare blue cockpit (Top Model)
1 x ALBATROS 3.0 m (orange/white)
1 x 5 LiPo XH>EH adapter
2 x BULLIT Wing 1095 mm
1 x Circlick securite
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x DPSI Ampere battery backer
1 x 11 mm wing servo holder
2 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x 58 mm micro servo cover
1 x Central piece 47 mm + 2,5º
1 x Cabel charger transmitter GRAUPNER
1 x DPSI magnetic switch actuator (housing)
1 x 4 LiPo XH>EH adapter
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Bidule 55 V3 2460 mm
1 x Ball link M2,5 (10 pcs)
1 x Bidule 55 2460 mm Cabina
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Universal Colour Paste deep black 50 g
2 x Propeller POWER-PROP 7x7
1 x Nitroverdu 500 ml
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Canopy Sweet / Siesta
1 x Spinner propeller pleg. 42 mm / 5,0 mm
1 x BOEING 727 kit
1 x LUNAK 4,00 m
1 x Spinner propeller pleg. 40 mm / 6,0 mm
1 x Connector CAN 15
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Clip fixing for wing (2 pcs)
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x Spray Graphit 33
1 x Propeller APC 11x8.5 Electric
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Servo GO-02 Digital 1.8g
1 x Filter Capacitor JR
1 x SPS 70V 140/280 A
1 x Ventus 2cx 4.5 m Canopy
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Propeller Pleg CAM Carbon 13x5
1 x COMFORT MOUNT ø 55 mm
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x AX-60 starters (5 pcs)
1 x Propeller Pleg CAM Carbon 15x8
1 x Retract undercarriage for gliders up to 2 Kg
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x NoNa BB wheel Ø175x55mm in pair
1 x Green smoke canister 65 g
1 x SPARK Switch 5.9v
1 x Electric rocket starters (6 pcs)
1 x Swift S1 De-luxe 3.140 mm
1 x Yellow smoke canister 100 g
1 x Initior Receiver FRX2 Wireless
1 x Propeller Pleg CAM Carbon 13x10
1 x Green smoke canister 100 g
1 x STANDOFF GAS ENGINE MOUNT 38 mm
1 x "S" set for planes
1 x Propeller Pleg CAM Carbon 13x8
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Propeller Pleg CAM Carbon 12x9
1 x 57 mm micro-mini servo cover
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Propeller Pleg CAM Carbon 14x7
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x Astra (Top Model)
1 x SPS Remote switch actuator
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
15,265.44EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies