430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Flat Connector 4.0 mm x 1000 mm
2 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
2 x ABS "T" angle 8.0x8.0x1000 mm
2 x U Profile ABS 2,0x4,0x1000 mm
2 x ABS angle 1.5x1.5x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
2 x ABS angle 10,0x10,0x1000 mm
2 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
2 x ABS angle 3,0x3,0x1000 mm
1 x Pilot "Duke" Legends Series (Slimline)
1 x Connectors DEANS 4 pins (1 pair)
1 x Pilot "Dick" Legends Series (Slimline)
2 x 30 cm DEANS female connector
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x Piloto Jet "Green" 1/6 Scale
1 x XH male balance (2S) connector (2 pcs)
2 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banna oro 3 mm (M/F)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
3 x Optotronix Aurora Plug
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Profile ABS half cane 4x2.5x1000 mm
1 x DPS Switch JR/JR
1 x CM-3
1 x WingFix ULTRA Black Edition
1 x 290 mm 290 mm M5x18 mm shaft ship
1 x Rigid coupling brass Ø 4 mm L: 25 mm
1 x 120x60 mm SLH KOVO wheel
1 x Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x Rigid coupling brass Ø 5 mm L: 25 mm
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Servo GO-1013 MG 3.8kg
1 x Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo MKS HV1220
1 x MPX screwable clips (5 pcs)
1 x Connectors MPX black female
1 x Connectors banna oro 2 mm (M/F)
2 x Gold antispark 4 mm plug
1 x Connectors MPX male (PIN double)
1 x 1/6 Pilot "John"
1 x MPX PCB "Gender-Changer (5 pcs)
1 x 1/6 Pilot "Buddy"
1 x Mounting frame MPX male connector
1 x XH male balance (5S) connector (2 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors banna oro 6,0 mm (M/F)
1 x MPX Support (2 pcs)
1 x MPX housing with flange (4 pcs)
1 x Contacto macho pin conector (10 pcs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x XH female balance (2S) connector (2 pcs)
1 x Connectors MPX female
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Piloto Jet "Red" 1/6 Scale
1 x Connectors DEANS (T)
1 x Connectors DEANS (T) micro
1 x Kontronik connector (10 connectors, 5 pairs)
1 x 1/4 Pilot "Heidi"
1 x Connectors banna oro 8,0 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x XH female balance (3S) connector (2 pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Wing connector 8pin with pin strip, plug & socket
1 x Parachute expulsion foam
1 x White smoke canister 140 g
1 x Blue smoke canister 140 g
1 x Yellow smoke canister 140 g
1 x White smoke bombs AX-9 (10 pcs)
1 x Green smoke canister 100 g
1 x AX-60 starters (5 pcs)
1 x AX-60 starters (5 pcs)
1 x Remote electric ignition system
1 x Cap closure 33/23.5mm (2 uds)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 38x4,5 mm wires output (2 pcs)
1 x Fundas para el transporte F3A alas
1 x ANGEL 48" pp orange/black/white
1 x 28x5 mm wires output (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x B4-0 rocket charges (6 pcs)
1 x ABS Strip 1.5x3.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x 41x5,5 mm wires output (2 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Clip fixing for wing (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Allen wheel collar M3x3
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Receptor MINIMA 6S HITEC
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Tank BULL MØ1 4L (CMJets)
1 x Pipa BULL MØ1 2.600mm
1 x Fuselage BULL MØ1 2.600mm
1 x Wing Joiner BULL MØ1 2.600mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x 290x4 mm M4 shaft ship
1 x ABS tube 20.0x18.0x1000 mm
1 x 290 mm M5 Prop shaft
1 x ABS I Strip 10x5x1000 mm
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x VIPER JET G2 Esq. 5 Green/White/Blue
1 x VIPER JET G2 Esq. 2 White/Red
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Oracover Yellow CADMIO 2 m
1 x Gear set HITEC HS-81
1 x Gear set HITEC HS-65 HB
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x Gear set HITEC HS-311/322/325BB
1 x Servo HITEC HS-5585MH
1 x Servo HITEC D131 MW nano
1 x Gear set HITEC D645 MW
1 x Servo case HS-225MG/225BB/5245MG
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servo KST X20-7512 V8.0 82kg 8.4v
2 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Gear set HITEC HS-225
1 x 58 mm micro servo cover
1 x Servo TOPMODEL DS1413 T
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
2 x Servo KST A08H V6.0 3,2Kg HV
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x Propeller Pleg CAM-Prop 8x6
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Servo KST X10 V2.0 ala 10mm 28g 10.8Kg
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Servo DITEX TD2612S
17,192.30EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies