Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Servo HITEC D89 MW
62.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Motor DLE 200cc Premium Muffler
2 x	Motor DLE 170 M - Paramotores
2 x	Corona grade autoarranque DLE-170M
1 x	Conector equilibrado XH (3S) macho (2 pcs)
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Gancho de remolcador
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x	Gancho de lanzamiento regulable
1 x	Termo-retráctil verde tubo de 2,4x1000 mm 2:1
1 x	CC 02
1 x	Oracover Azul Cielo 2 m
1 x	Gancho de remolque hasta 4,5 m
1 x	Adaptador 5 LiPos XH>EH
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Terminales riostras M6x66 (2 uds)
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Bisagra pin 34x16 mm (10 uds)
1 x	Cartucho de humo Azul 140 g
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	Tubo ABS 9,0x7,0x1000 mm
1 x	Kit de montaje "M"
1 x	Varilla acero roscada M3 -1m
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Soportes para puntas de alas para AX-18/AX-60 (2 pcs)
1 x	Suncover 100cc Red
1 x	Varilla ABS 1,25x1000 mm
1 x	Anemometro Xplorer3
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Horn de mando 5/15 con rótula M2
1 x	Horn de mando variable 5 mm M2
1 x	Rótula con rodamiento M3 22x5,5
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Helice APC 10x5 Electric Pusher
1 x	Helice APC 13x10 Electric
1 x	Helice APC 12x10 Electric
1 x	Helice PT 20x13 EL
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Helice APC 14x10 Electric
1 x	Motor DLE 430 cc - Paramotores
1 x	Helice APC 11x4.7 SF
1 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Conector equilibrado XH (4S) hembra (2 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Hélice POWER-PROP 13x9
1 x	Conector 2 mm hembra (2 pcs) con conector de seguridad
1 x	Conector equilibrado XH (4S) macho (2 pcs)
1 x	Conector banana oro 6,0 mm
1 x	Conector banana oro 4 mm (Ultralight)
1 x	Salida para cables 38x4,5 mm (2 pcs)
1 x	Conector CAN 15
1 x	Kwik link negro largo (10 pcs)
1 x	Bisagra PIN mediana (12 uds)
1 x	Oracover Azul 2 m
1 x	Termo-retráctil rojo tubo de 1,6x1000 mm 2:1
1 x	Termo-retráctil rojo tubo de 6,4x1000 mm 2:1
1 x	Clevis con trasmisión M3
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x	PIX Hawk con accesorios
1 x	Adaptador 2 LiPos XH>EH
1 x	Bisagra 18 mm reforzada
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Circlick seguridad
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Tubo Pitot para PIXHAWK
1 x	BEC 3A FOXY
1 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x	Bisagra de Flaps (6 uds)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Termo-retráctil negro tubo de 6,4x1000 mm 2:1
1 x	Gancho remolque inferior plano
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
1 x	Cartuchos de humo AX-60 amarillo (5 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Hélice POWER-PROP 7x7
1 x	Rótula con rodamiento M2 22x5,5
1 x	Varilla ABS 5,0x1000 mm
1 x	Cartucho de humo Amarillo 100 g
1 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Cartuchos de humo AX-60 mezclados (5 pcs)
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Cartucho de humo Rojo 140 g
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x	Kit de montaje "S" para avión
1 x	Cartuchos de humo AX-60 blanco (5 pcs)
1 x	Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
1 x	Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Helice APC 12x6 Electric Pusher
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	GameCommander USB Universal
1 x	Tapaporos 1000 ml (DOPE)
1 x	Bayoneta aluminio ø35×1.5 mm x 500mm
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Conector 5,0 mm EC5 macho con funda (2 pcs)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Arandela 3.2 mm (20 pcs)
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Conjunto bieleta 140 mm para dirección
1 x	Instrumentos individuales 1/4 Planeador
1 x	Bayoneta aluminio ø35×1.5 mm x 1m
1 x	Corona pequeña autoarranque DLE-170M
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Arandela 2.7 mm (20 pcs)
1 x	Conector banana oro 3 mm
1 x	Arandela abierta 4.1 mm (20 pcs)
1 x	Circlick para eje 2.3 mm (10 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Conector DEANS 4 pines (1 par)
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Motor DLE 200cc Std
1 x	Conector banana oro 3,5 mm
1 x	Camara 800 TVL CMOS para FPV
1 x	Arandela 4.3 mm (20 pcs)
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Conector Centralita Optotronix Aurora
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm

16,593.89EUR