Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 04
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Large flex hinge (12 uds)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Cable Cargador FUTABA
1 x	Decorative caps, multicoloured, short
1 x	Extractor piñones 2.3/3.2 mm
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	3,0x60 mm allen screwdriver
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Xplorer2 anemometro
1 x	Baseplate servo
2 x	Xplorer3 anemometro
1 x	Hot Glue Stick RED
2 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Xplorer1 anemometro
1 x	Strip 3,5x1,75x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	F3A carbon 80 mm spinner for Spark EVO
1 x	Ball link M2,5 (10 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Short ball link M3 (6 uds)
1 x	Universal Colour Paste white 50 g
1 x	JETImodel SINGLE BEC
1 x	Support FUEL DOT V3
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Smoke set "M"
1 x	70 mm INO spinner (carbon imitation)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Spray EC Red 400ml
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Glases Nimbus
1 x	1/6 Pilot "Buddy"
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	1/6 Pilot "Tony"
1 x	Actuador lineal HLS12-100210-7.4v
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Spinner NUT M6
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Futaba male 40 cm extension
1 x	Futaba Female 40 cm extension
1 x	ABS tube 18.0x16.0x1000 mm
1 x	2,0x50 mm allen screwdriver
1 x	Miniature brass strap hinge, 1 m
1 x	Adjustable brass horn threaded M3
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Flap hinge (6 pcs)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Small pinned hinge (12 uds)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x
1 x	Receiver replacement antenna, approx. 85
1 x	5 line servos wire black (1 m)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	MZ-18, 9 Channel HoTT
1 x	Screwdriver for Torx® TX6
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Hot Glue Stick BLACK
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ferrita con funda
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	M3 Maxi ball link (2 uds)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Spray Graphit 33
1 x	Adapter lead MPX/EC3
1 x	Support Filtro FESTO
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Cabel charger transmitter GRAUPNER
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Blue smoke canister 140 g
1 x	USB HLS prog. interface
1 x	Angle of incidence meter
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Glases Stratus
1 x	500 ml sealer (DOPE)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Propeller balancer
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	89 mm INO spinner (carbon imitation)
1 x	1/4 Pilot "Mike"
1 x
1 x	Ventus 1:4 set of instruments
2 x	Xplorer4 anemometro
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Long ball link M2 (6 uds)
1 x	PPM Encoder Module
1 x	BALSA triangular 10x10x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	"Taxi Tank" Fuel Tank
1 x	Propeller G-Sonic 20x8
1 x	Copier 5x20 cm pcs
1 x	Foam plastic plates (310x210x2 mm)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	MZ-12, 6 Channel HoTT
1 x	Spikes Band (5 m)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Conector JAPAN G2 Set 5 pares
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Vacuum pump 12 CFM
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Screwdriver for Torx® TX8
1 x	POLARON EX 800w charger
2 x	Starter 12v (Max 90 and 15ccm)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Crimping tool
1 x	Beech dowels 4.0 x 1000 mm
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	White silicone 0,25 qmm wire (100 m)
2 x	Digital precision scale up to 2000 g
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Oils Pumps Empty (1 liter)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Dust collector for mould cleaning
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	AC-10 pre-rotacion with motor
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS I Strip 20x10x1000 mm

7,102.49EUR