1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 30 cm MULTIPLEX female connector
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
2 x Conector JR Servo male (10 pcs)
2 x Connectors banna gold 5,5 mm (M/F)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
2 x 30 cm DEANS female connector
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
3 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Conector FUTABA Servo female (10 pcs)
2 x Connectors banna oro 4 mm (M/F)
1 x Connector CAN 15
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Connectors banna oro 3 mm (M/F)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Conector JR Servo male (10 pcs)
2 x Conector BEC male (10 pcs)
1 x Connectors DEANS (T) micro
1 x Bag connector 2 mm
2 x Connectors banna oro 2 mm (M/F)
2 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
2 x Connectors DEANS (T)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Conector JR Servo female (10 pcs)
2 x Connectors banna oro 3,5 mm (M/F)
1 x 
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Connectors MPX male
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Conector XT-30 (hembra)
1 x Conector XT-30 (macho)
1 x XH female balance (7S) connector (2 pcs)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Gold antispark 4 mm plug
1 x Xplorer3 anemometro
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Extension silicon 10 cm (Futaba)
1 x Small Crow DLE-170M
1 x Motor DLE 430 cc - Paramotors
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Glases Moritz
1 x Conector JR Servo female (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
2 x Tray for FUTABA 18 SZ
1 x Hovercraft sailcloth
2 x Tailwheel for 20/60 size
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Buy Perforated film 100 cm / 50 m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x ABS 500 x 400 x 1 mm (white)
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x 1/7 Pilot "Japanese"
2 x Nut M2
2 x Head core bushing
1 x Head core
1 x Steering lever
1 x Blade holder lower
1 x Xoar Electric Beechwood Prop 22x10
1 x Conector BEC female (10 pcs)
1 x MPX Sub-D Adaptor
1 x XH female balance (3S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH male balance (4S) connector (2 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
3 x Tail wheel for 5-8 kg models
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x DUPLEX 2.4EX MT 125 temperature sensor
2 x DUPLEX 2,4GHz MRPM-AC EX
2 x DUPLEX 2.4EX Expander E4
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ
1 x Switch Cap L (Blue)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Switch Cap L (black)
1 x Teacher-student connector T12FG/FX-30
1 x Motor OS 55 AX
1 x Motor OS MAX 160 AX
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x HDT Jet Central
2 x Electric starter BEE (old)
1 x Bujia OS G5 gasolina
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x DUPLEX MUI 30 Sensor
1 x ANGEL 48" pp orange/black/white
1 x AddCAP 10AS capacitors
1 x Jun-Si iCharger 4010 Duo
1 x DUPLEX 2.4EX MSpeed PITOT <300 Km/h
2 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Pitot tube JETI MSpeed DUPLEX
1 x DUPLEX 2.4EX RC Power Switch 10
1 x SLICK 360-B 104" (2640 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x DUPLEX 2.4EX MUI 75
1 x EDGE 540-A 91" (2310 mm)
1 x EXTRA NG 85" 2159mm red/white
1 x DUPLEX 2.4EX MT 300 EX
1 x MT 125 temperature sensor
1 x EXTRA NG 85" 2159mm yellow/blue
1 x Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
1 x SLICK 360-A 104" (2640 mm)
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x DUPLEX 2.4 EX MVario2
2 x DUPLEX TGs 2,4 GHz (transmitter module)
2 x Cable adapter iCharger
1 x Sensor DUPLEX 2.4EX MUI 200
1 x DUPLEX 2.4EX RC Switch
1 x DUPLEX MRMP Hall EX
1 x PowerBox Smokepump JETs 2x outside
1 x DUPLEX 2.4EX MUI 150 Sensor
1 x Pilot JAN 1/4 Saiplanes
1 x Futaba Aero Large Case - Internal Foam
2 x TX-Tray V1 (L) (Black)
1 x Receiver bed (Blue)
1 x Transmitter Balancer Futaba T-10CG
1 x Jeemo Dolly
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Futaba Neckstrap
1 x VIPER 1.7 Electric break wheels + structure
1 x Switch Cap L (Red)
1 x XICOY X45 rail
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Motor OS FS 75 AX
1 x Motor OS MAX 120 AX
1 x AXI 2217/20 V2 Long "F5J"
1 x Spark Ceramic JETCENTRAL
1 x Carburador OS (Type 40K) 46AXII
1 x AXI 2814/16 V2
1 x OS GT15 W/E-4040 for airplane
1 x AXI 2826/10 V2
1 x AXI 2820/10 V2 Long
2 x Motor OS 3820-1200 electric
1 x Screw M3x16
1 x Head spacer
1 x Head lower part New
2 x Tailwheel for 40/90 size
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Z-shaped servo mount
1 x Screws flush mount M2
1 x Baering 3x8x4
1 x Cierva C30 spanish decoration Stickers
1 x Wheel keeper washer
1 x Blade holder upper
1 x Nut M2 securing
1 x Balls 4 mm
1 x Ball joint long
1 x Sprung retractable undercarriage (Alfa model)
1 x Tren de cola carbono 50-70cc
1 x HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x Wingstabi 9 DR M-Link Receiver
1 x Servo RHINO pro SHV digi 4
1 x Spinner propeller pleg. 30 mm / 3,0 mm
1 x Spinner propeller pleg. 30 mm / 5,0 mm
1 x Prop rubber XS set 4 pieces
1 x Transmitter Balancer SPK DX-8
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX Expander E2
1 x Tail wheel for 8-12 kg models
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Tailwheel for 1-3 kg models
25,125.30EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies