Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Moki Exhaust Bend 50VT
1 x	ENIGMA ARF
1 x	Towing hook
1 x	Ventus 1:4 set of instruments
1 x	Towing hook <3m
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Conector Servo female 4 pines
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Soporte grifo FESTO (2 pcs)
2 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Nitroverdu 500 ml
1 x	XH male balance (3S) connector (2 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	ARAMID honeycomb 1300x2600x2 mm
2 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	XH female balance (3S) connector (2 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Threaded coupler M3 (10 uds)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Spray Graphit 33
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Support conector MPX (6 pcs)
2 x	Switch Cap L (Blue)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Angle support XT60 conector
1 x	One touch canopy lock
1 x	RH long aluminium horn (2pcs)
3 x	Switch Cap L (silver)
1 x	Switch Cap M (black)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Socket head long ball link M3 (2 uds)
1 x	Switch Cap M (red)
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Extension silicon 30 cm female (Graupner)
1 x	800TVL CMOS camera for FPV
1 x	Socket head long ball link M3 (6 uds)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Futaba Female 40 cm extension
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Extension 15 cm (Futaba)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Ball link M2 (10 pcs)
1 x	Hobbylite Filler, Balsa colour
1 x	Premium servo extension 50cm
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	TARANIS X9D - plus EU/LBT FrSky
1 x	Cabel "Y" 30 cm (graupner)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x	Cap closure 33/23.5mm (2 uds)
2 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
2 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Support FUEL DOT V3
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Receiver FrSKY Archer R8pro 2,4 Ghz
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Horn 5/10 with M2 Bearing
1 x	Joint with bearing M3 22x5,5
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	XH female balance (4S) connector (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Neck strap Double V2
1 x	Universal Colour Paste deep black 250 g
1 x	Support pump Xicoy X45
1 x	30 cm DEANS female connector
1 x	Maleta transporte FUTABA 10PX
2 x	Teacher-Pupil-cable all FrSky Transmitter
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Long ball link M3 (6 uds)
1 x	Gold antispark 5,5 mm plug
1 x	Release wax 250ml
1 x	Locking cable tie 2.5x100 (uds)
1 x	Conector BEC male (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	SlowFlyer control horn (3 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	M3 black washers (4 pcs)
1 x	TARANIS Q X7
2 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Socket head ball link M3 (2 uds)
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Small aluminium horn red (2pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Soporte filtro FESTO (4 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Premium servo extension 100cm
1 x	Extension silicon 100 cm (Futaba)
1 x	Carbon fiber rod 6.0 mmx1000 mm
3 x	Decorative caps, multicoloured, short
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Paint gun for sprays
1 x	Transmitter Balancer Futaba V
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	Receiver bed (Blue)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Tube Pitot to PIXHAWK
1 x	PPM Encoder Module
1 x	Battery bed V2_M (black)
1 x	LiPo Storage Box Type "BIG"
1 x	Long ball link M2 (6 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	RX TARANIS V8FR-II HV 2.4 GHz
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	LiPo Storage Box Type "P"
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Battery bed V2_S (black)
1 x	SUS wire 3m (nylon coated)
1 x	Pulley brass 5/1,5 (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Covered closure or fairings
1 x	Buy Perforated film 100 cm / 10 m
1 x	Switch Cap M (silver)
1 x	Cable coupler M2x66 (2 uds)
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Adap/Exten for Futaba 12-14C
1 x	Transmitter Balancer SPK DX-8
1 x	Painting GHT Lexan Black 150 ml
1 x	Switch Cap L (Red)
1 x	Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2
1 x	Turnbuckle M2,5x32/48 (2pcs)
1 x	Threaded coupler M2 (10 pcs)
1 x	Transmitter Stick Ends V5 Red - M4 JR/DX7
1 x	Transmitter Balancer Futaba T-10CG
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel 3 m Pull-Pull complet set (max 20 kg)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	TX-Tray V1 (L) (Black)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	20 g tin paste
1 x	wire tensioner (red)
1 x	wire tensioner (blue)
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	FPV Station for SE TX-Tray V1
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Decorative caps, multicoloured
1 x	Antenna holder bracket double
1 x	Ball link M3 (10 pcs)
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Universal Colour Paste deep black 50 g
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Clip mini fixing for wing (2 pcs)
1 x	Emisora HORUS X10S Carbone Fiber
1 x	TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Support XT60 conector (2 pcs)
1 x	Bird (Aero-naut)

5,626.86EUR