4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Conector BEC male (10 pcs)
Conector BEC male (10 pcs)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
4 x ABS 500 x 400 x 1,5 mm (white)
1 x Carbon fibre sleeve 12k 170 mm x 5m
2 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
3 x Buy Perforated film 145 cm / 50 m
2 x ARAMID honeycomb 1300x2600x2 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x Buy Perforated film 100 cm / 50 m
1 x Buy Perforated film 100 cm / 20 m
2 x ABS 500 x 400 x 0,5 mm (white)
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Carbon fibre sandwich sheet 350x150x3 mm
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x ABS 500 x 400 x 1 mm (white)
1 x Buy Perforated film 100 cm / 10 m
26 x ABS 500 x 400 x 2,0 mm (white)
2 x Conector Servo female 4 pines
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
2 x Aluminium sheet 500x250x0,5mm
1 x XH male balance (3S) connector (2 pcs)
1 x Styrene plate 320x120x1.0 mm
3 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Connectors banna gold 5,5 mm (M/F)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors DEANS 4 pins (1 pair)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Glass fibre sleeve Ø 20 mm
1 x Glass fabric 25 g/m² (1 m²)
2 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Connectors banna oro 3 mm (M/F)
1 x XH female balance (2S) connector (2 pcs)
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Wing connector 8pin with pin strip, plug & socket
1 x 30 cm DEANS female connector
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Film release agent PVA 25 ml
1 x Connectors banna oro 2 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Connectors banna oro 8,0 mm (M/F)
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (2S) connector (2 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x XH male balance (5S) connector (2 pcs)
1 x MPX Sub-D Adaptor
1 x XH male balance (4S) connector (2 pcs)
2 x Foam plastic plates (310x210x2 mm)
1 x 2 mm male connector (2 pcs) with safety connector
2 x Fiberglass plate 350x150x0.3 mm
3 x Fiberglass plate 350x150x2.5 mm
1 x Glass fabric 25 g (2 m²)
2 x Chopped glass fibre strands 3 mm
1 x Chopped glass fibre strands 3 mm
1 x Optotronix Aurora Plug
2 x Conector BEC male (10 pcs)
2 x Styrene plate 320x120x0.5 mm
2 x Carbon roving DowAksa / 24k / 1600 tex
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Flap hinge (6 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Micro flex hinge (12 uds)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Shirt Hispano Aviación
1 x Cap Hispano Aviación
1 x ABS tube 20.0x18.0x1000 mm
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x White smoke canister 100 g
1 x Ball link M2,5 (10 pcs)
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
3 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Digital precision scale up to 2000 g
2 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
2 x MPX PCB "4 Pins", 5 pieces
2 x XT-60 connector (female)
1 x CA Glue fast 20g
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Nut M2 securing
1 x Gear set HITEC HS-225
1 x Head upper part
1 x Battery plate
1 x Wheel keeper washer
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x XH female balance (5S) connector (2 pcs)
1 x Foam plastic plates (310x210x8 mm)
1 x Fiberglass plate 350x150x1.5 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Ventus 1:4 set of instruments
1 x Charger LiPo Charger4
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Gracia Maxi ARF, spare wings (Top Model)
1 x ASK 21 6.8m
1 x Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x 17 mm servo arm with ball link DES Graupner
1 x DG-303 ACRO 3750 mm, canopy
1 x Balls 4 mm
1 x Fox MDM 1 4000 mm DeLuxe
1 x Challenger ARF (Top Model)
1 x LA500 rotor head core
1 x Rotorshape Autogyro
1 x Fox MDM 1 6000 mm
1 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x Aero-Master Fuselage (Aero-naut)
1 x 40 mm servo arm with bearing (2 pcs)
1 x ASH 31 Mi Scale:1/3 - 7m
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Screw M3x16
1 x Astra (Top Model)
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Futaba S9650/9670SV - Upper Case
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x 50x45 mm micro-mini servo cover
1 x Servo MKS HV1220
1 x Soporte servo KST X08/H and Plus
1 x Servo Dymond D 37 Eco
1 x Aero-Master Wings (Aero-naut)
1 x Ball joint long
1 x LA500 Autogyro
1 x Blade holder center GFK 0,5 mm
1 x Head lower part
1 x 65 mm mini servo cover
1 x Gracia Maxi ARF (Top Model)
1 x Fiberglass plate 1200x1000x0,2 mm
1 x Glass fabric 49 g/m² (1,27 x 20 m)
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x Carbon plate 700x550x0.5 mm
1 x Esc MasterBasic 90 Opto
1 x Esc MasterBasic 40SB
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x XT-30 connector (pair)
1 x 460 mm EPP Floats
1 x XH LiPo extension lead
1 x 20x1000 mm Ring Strap Back To Back
1 x Fiberglass plate 620x540x0,3 mm
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x Carbon plate 550x350x4.0 mm ECOTECH
1 x Gold antispark 4 mm plug
1 x Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x A30-M/L/XL Backmountset complete
1 x Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x A40 Backmountset complete
1 x Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x A50 Motor Mount Alu complete set
1 x A50 Backmountset complete
1 x Esc MasterBasic 55SB
1 x Ball Bearings for motor A60-V2
1 x Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x A50 Backmountset complete
1 x Bearings for motors hacker A50
1 x DUPLEX 2.4EX RC Switch
1 x EDF Stream-Fan 110mm kv780
1 x Axle for motor A20-S (3 uds)
1 x Battery charging cable XT60
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Protector Connector MPX (1 pair)
1 x Servo Connector Brackets (10 pcs)
1 x PIN Connector female (100 pcs)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x XT60 Connector with Holder Male 2pcs
1 x MPX Support
1 x Mounting frame MPX female connector
1 x Red 3m5 mm connector holder
1 x Red 4 mm connector holder
1 x Protector Connector Dean-T (1 pair)
1 x Wing conexion 2 servos Futaba 50 cm
1 x Mounting frame MPX male connector
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x MPX housing with flange (4 pcs)
1 x Bag connector 2 mm
1 x Fiberglass plate 620x540x0,2 mm
1 x Fiberglass 5000x1100 mm 49 g/m²
20,362.97EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies