1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x APM2.6 Power module with 5.3V DC BEC
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Double conector with JR adapter and 200 mm extension
2 x 4 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Connector Sub-D 2+5 Male
1 x 5 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x BEC 3A FOXY
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (female)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Dean "T" - Futaba Adapter
1 x Circlick securite
2 x DPS Switch JR/JR
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x CM-3
1 x CC 03
1 x Connector Sub-D 2+5 Female
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabling for Fox MDM1 wings
1 x CC 02
1 x Cabel charger transmitter GRAUPNER
1 x Extinguisher CO2 - 2 Kg
1 x Interface Jack Adapter IKARUS
1 x EasyFLY Addon
1 x GameCommander USB Universal
1 x SIMtransmitter 6 Mode 2
1 x Interface Realflight Simulator
1 x RF9 Flight Simulator with Spektrum Controller
1 x SE Ring 250 mm (2 pcs)
2 x Marker ties (20 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
2 x Foil for sticking flaps and ailerons
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x SE Ring 330 mm (4 pcs)
1 x MPS Gas-Cap-Powerswitch
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x LOWER TOW HOOK
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Large flex hinge (12 uds)
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Round Rod 1,25x1000 mm
1 x "S" set for boats
1 x Cabin latch Fox MDM1 4m (pair)
1 x Futaba male 40 cm extension
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x Fuel bottle 500 ccm
1 x Electric Fuel Pump 12v
2 x Junta humo metalica G30 (DLE30/DLE60)
1 x Compact on-board starting system (9525)
1 x 1000 cc gasoline fuel tank complet
1 x Fuel Fittings-Red
1 x Conector FESTO M3 Quick 3mm 90º
1 x GLOW 2C + accesories
1 x Encendido CDI RCAME 1/4*32 Single 120º
2 x Starter EM Gear Power 80
1 x Fuel tank 500ml (17oz)
1 x FESTO connector M7 Quick 6 mm
2 x Quick hose connector 4-4 mm
1 x Quick hose connector 6-4 mm
1 x RCEXL Electronic ignition twin A-02
1 x Electromotor starter EME 35cc
1 x T-Hose connector 4-4-4mm
1 x Junta humo metalica G35 DLE35
1 x Quick hose connector 4-3 mm
1 x Check valve quick hose connector 4-4 mm
1 x 280 cc gasoline fuel tank complet
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x Compact on-board starting system (9713)
1 x DLE 30 complete electronic ignition
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Short Switch On/Off micro
1 x SPS 70V 140/280 A
1 x Opto Gas Engine Kill Switch
1 x Three-position switched channel, short
1 x SPS Remote switch actuator
1 x Black silicone 0,25 mm² wire (25 m)
1 x Green silicone 0,25 qmm wire (50 m)
1 x 5 line servos wire black (1 m)
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 450 mm (2 pcs)
1 x Tape GFK 25 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Tape GFK 50 mm
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Conector MR-60 (pareja)
1 x BETA 1400 ARF Red
1 x Spinner 40 mm Black (Kavan)
1 x Pin hinge 34x16 mm (10 uds)
1 x SPS 70V 100/200 A
1 x PSC 5
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x PowerBox Smokepump JETs 2x outside
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Electric Fuel pump
1 x Simple take for fuel tank
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 50x45 mm micro-mini servo cover
1 x Aluminium ignition bad (blue)
1 x FESTO connector M7 barb fitting 6mm
1 x DLE Ignition unit
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Compact on-board starting system (9715)
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x FESTO connector M7 Quick 4mm 90º
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Pitts Muffler kit for CAP 21
1 x TYGON tubo 15 m Diam. 3.4 x 2.0 mm
1 x 22m Fitting barb
1 x Fuel line plugs (Black)
1 x Piston ring for DA-150
1 x Piston ring for DA-50R and DA-100
1 x Multi-adapter balancer JST - TP
2 x Spinner propeller pleg. 30mm axle 3,0 mm
2 x Turbina KINGTECH K260 G4
2 x Shaft sleeve LAMA
2 x Spinner propeller pleg. 30 mm / 2,3 mm
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
11,686.57EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies