Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	11 mm Rubber pads (14 pcs)
2 x	Aluminun wheel collar 3 mm Ø (4 uds)
3 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	250 mm / 16 mm Airbrakes
1 x	28x5 mm wires output (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Allen wheel collar M4x4
1 x	Cable tie mounts 4.3 (4 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	Clip mini fixing for wing (2 pcs)
1 x	Allen wheel collar M3x5
1 x	Clip fixing for wing (2 pcs)
1 x	Canopy Latch
1 x	Cabin latch Fox MDM1 4m (pair)
3 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Cockpit aluminium closing
1 x	Allen wheel collar M3x3
2 x	80 mm rods set for direction control
1 x	41x5,5 mm wires output (2 pcs)
2 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
3 x	100 mm rods set for direction control
1 x	Allen wheel collar M4x6
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Small pinned hinge (12 uds)
2 x	15 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
4 x	25 mm reinforced hinge
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
2 x	Miniature brass strap hinge, 1 m
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
2 x	Long pinned hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Long pinned hinge (6 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Conector Servo female 4 pines
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Conector BEC male (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Connectors banna oro 2 mm (M/F)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	SIMtransmitter 6 Mode 2
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Propeller balancer
3 x	Field folding model stand
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Extension silicon 10 cm (Graupner)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Vacuum pump P1-N
1 x	Ferrita 27x14x7 mm
1 x	Round Rod 6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	FESTO connector M5 Quick 6 mm
2 x	Gates hinge aluminium (1 pcs)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	FESTO connector M7 barb fitting 6mm
1 x	FESTO connector 1/8 Quick 6mm 90º
1 x	Electromotor starter EME 35cc
1 x	100 mm rods + T patellas set for direction control
1 x	PowerBox iGyro SAT
1 x	BlueCom™ Adapter (iOS)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	PowerBox PIONEER incl. microSwitch
1 x	PowerBox iGyro 1e
1 x	PowerBox Competition
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	GPS Sensor + Logger OPTronics
1 x	USB Adaptor OPTronics
4 x
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	EasyFLY Addon
1 x	Nut M2
2 x	Blade holder upper
1 x	Interface Realflight Simulator
1 x	Conector FUTABA Servo male (10 pcs)
1 x	XT60 Connector with Holder Male 2pcs
2 x	140 mm rods + T patellas set for direction control
1 x	45 mm rods set for direction control
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	Protector Connector MPX (1 pair)
1 x	MPX PCB "6 Pins", 5 pieces
1 x	Soporte carbono MR30 (2 pcs)
1 x	Red 3m5 mm connector holder
1 x	MPX housing with flange (4 pcs)
1 x	MPX Support (2 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	XT-90 connector (pair)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	Pilot Lotsenboot
1 x	Fishing boat Jule Fischkutter
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Catalog AERO-NAUT 2016
2 x	Medidor ángulos y/o incidencias
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel
1 x	73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x	Cable with accesories
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	60x25 mm tail wheel "type F3A"
1 x	Horn 6/20 with M3 Bearing
1 x	76x24 mm (3.0") Type jets aluminium core wheel
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	32x9 mm foam standar KOVO wheel (2 pcs)
1 x	DIVA cabin cruiser
1 x	WingFix ULTRA Black Edition
2 x	Field folding model stand SebArt
1 x	Propeller balancer
1 x	Surface Indicator Gauge Small
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
2 x	Screws flush mount M2
1 x	Head upper part
1 x	Blade Holder Full (3 blades)
1 x	Tail tube RAINBOW
2 x	Rotor Mast
1 x	Battery plate
1 x	Fiberglass motor-holder for electric motors
1 x	BU 131 Jugmann ARC
1 x	Gearbox for VM motors (2,5:1)
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	DH82 Tiger Moth Scale 1:3.3 Panel Instrum. frontal
1 x	LS-8 GFK 6m Glider
2 x	BU 131 Jugmann Panel Instrum. trasero
2 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	BU 131 Jugmann Panel Instrum. frontal
1 x	LO 100 ARC 3.3m
2 x	Fiberglass motor-holder for electric motors
1 x	PARTENAVIA 2020 mm ARF with Flaps
1 x	Glow filter
1 x	PARTENAVIA 2020 mm ARC with Flaps
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gearbox for VM motors (3:1)
1 x	20x15 Falcon electric V2
1 x	Pitts Muffler kit for CAP 21
1 x	MASTER 16x10 tree blades propeller
1 x	Brake disc Electron Retracts
1 x	300 Newtons FEMA absorber
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	400 Newtons FEMA absorber
1 x	FALCON 24X12 CARBON PROPELLER (GAS)
1 x	Wheel FEMA 127 mm / 6 mm
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Distanzstück motor OS 120 AX
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Propadapter for motor A50
1 x	Propeller MASTER AIRSCREW 12x8
1 x	6x4 tree blades propeller
1 x	Propeller MASTER AIRSCREW 9x6
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	100 Newtons FEMA absorber
1 x	Absorver mount set for 5-10 Kg models
1 x	Wheel FEMA 152 mm / 8 mm
1 x	Propeller MENZ-S 19x12
1 x	Propeller MENZ-S 16x8
1 x	Propeller MENZ-S 20x6 Pusher
1 x	Propeller MENZ-S 16x10 3-Blades
1 x	Propeller MENZ-S 18x12
1 x	Propeller MENZ-S 16x12
2 x	Blade holder center GFK 0,5 mm
1 x	Electromagnets brake
1 x	Nut M1,6
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller CFK 16x16 Slim
1 x	Propeller CFK 12.5x7
1 x	Propeller RF CFK 14.5x14
1 x	Piston ring for DA-60 and DA-120
1 x	DLE-111 Crankcase V2 Conversion Kit
1 x	O-ring Saito FG-73 5cyl
1 x	CILINDER FOR DLE 55RA
1 x	DLE 85/111/120 Crankshaft keyway
1 x	Ignition for DA-50-R, DA-60, DA-85
1 x	Carburetor DLE 170M
1 x	Hifht speed needle DA-50R/100I
1 x	Motor Saito FG-100 TS, 100 cc
1 x	Reed valve for DA 50-R
1 x	Muffler DLE 20
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	18 mm reinforced hinge
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	Servo HITEC HS-125 MG
1 x	Propeller MENZ-S 21x8
1 x	Gear carbonite set HITEC HS-6965
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	Bearing 3x6x2,5
1 x	Bearing housing
1 x	Screw M3x16
1 x	Head core bushing
1 x	Steering lever
1 x	Baering 3x8x4
1 x	Washer 2.2×4
1 x	Blade holder center
1 x	Blade holder lower
1 x	Screws M1,6x6 Allen
1 x	Side rudder

15,548.62EUR