Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Bateria LiPo GRE24 600 mAh 3.7v
12.25EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Gancho de remolque + 4,5 m
3 x	Gancho de remolque hasta 3m
1 x	Gancho de lanzamiento fijo
3 x	Gancho de remolque hasta 4,5 m
2 x	Gancho de remolcador
2 x	Acoplador para cable M4 (10 pcs)
2 x	Anemometro Xplorer2
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
2 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Acoplador M2 (10 uds)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
2 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Anemometro Xplorer4
2 x	Acople ALU M2 Ø 4 (2 uds)
2 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Acoplador "Z" Ø 2 (2 uds)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x	Liston ABS 1,0x3,0x1000 mm
2 x	Varilla ABS 1,25x1000 mm
2 x	Liston ABS 1,5x6,0x1000 mm
2 x	Liston ABS 1,5x8,0x1000 mm
2 x	Liston ABS 2.0x10.0x1000 mm
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Liston ABS 1,0x4,0x1000 mm
3 x	Liston ABS I 20x10x1000 mm
2 x	Liston ABS 1,0x2,0x1000 mm
1 x	Gancho de lanzamiento regulable
1 x	Gancho remolque inferior plano
1 x	Pegatinas números para marcar
1 x	Extractor piñones 2.3/3.2 mm
1 x	Oracover Verde 2 m
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Oracover Azul Cielo 2 m
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Adaptador 3 LiPos XH>EH
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Sistema para cables con tensor (silver)
2 x	Terminales riostras M3 (10 uds)
1 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Anemometro Xplorer1
1 x	Soporte bomba Xicoy X45
1 x	Power Box GPS Sensor III
1 x	Soporte Montaje Bateria 2500 (2 pcs)
2 x	Liston ABS I 3,5x1,75x330 mm
1 x	Varilla ABS 2,5x1000 mm
2 x	Liston ABS H 1,5x1,5x330 mm
2 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Liston ABS 2.0x3.0x1000 mm
2 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Anemometro Xplorer3
1 x	Rótula con bola M2 (10 pcs)
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
2 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x	Set clevis para pull-pull (TY13233 y TY13234)
3 x	Bird (Aero-naut)
2 x	TWIST planeador gomas
2 x	Bancada servo gancho
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Arandelas 2.2×4
1 x	Núcleo del rotor
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
2 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Rotula 6 mm hexagonal con bola M3 (10 pcs)
2 x	Rótula INDUSTRIAL con bola M3 (2 uds)
2 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula metálica M3/3 azul (2 pcs)
2 x	Rótula con bola M2,5 (10 pcs)
2 x	Rótula con rodamiento M3 22x5,5
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Porta kwiw link M2,5 (10 pcs)
1 x	Sistema para cables con tensor (rojo)
1 x	Rótula V3 aluminio M3/5 Diam con base corta (2 pcs)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Rótula metálica M2/2 azul (2 pcs)
1 x	Rótula V3 aluminio M2,5 5Diam (2 pcs)
1 x	Kwik link negro largo (10 pcs)
1 x	FunCub NG verde RR
1 x	PowerBox DigiSwitch V2 MPX/JR
1 x	Varilla ABS 3,0x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Interrruptor de encendido SPARK Switch 5.9v
1 x	Soporte superior de las palas del rotor
1 x	Bolas 4mm
2 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Tubo de cola
1 x	Tornillos M3x16
1 x	Enganche de las palas del rotor
1 x	Head spacer
1 x	Parallamas
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Rótula 6 mm con bola M3 (10 pcs)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Terminales riostras M3 (10 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	Rótula larga M2 con bola/tornillo (6 uds)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (6 pcs)
1 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x	Rótula V3 aluminio M2,5 Diam (2 pcs)
1 x	Rótula V2 M2,5 5Diam negra (2 pcs)
1 x	Rótula corta M3 con bola/tornillo (6 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Rótula larga M1.6 con bola/base (6 uds)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Rótula corta M1.6 con bola/base (6 uds)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rótula V2 corta M2 5Diam negra (2 pcs)
1 x	Rótula con bola plana M3 (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Clevis con trasmisión M3
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Rótula M3 RPA's-UAV's
1 x	Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x	SkyMaxx 1.550 mm (kit)
1 x	CHALLENGER Indoor
1 x	ROBIN S50E AZUL/BLANCO
1 x	DRACO 2.0m Set ruedas
1 x	DRACO 2.0m BNF
1 x	Plancha fibra vidrio 350x150x3.0 mm

3,583.86EUR