1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 120x60 mm SLH KOVO wheel
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Jeemo Dolly
1 x Oracover Red 2 m
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Fixed launching hook
1 x Extension silicon 30 cm female (Graupner)
1 x Ply-Span 450x600/13g Yellow
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Connectors banna oro 3 mm (M/F)
1 x XH male balance (3S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Extension silicon 30 cm male (Graupner)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 200 mm extensión servo HITEC/JR
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Release wax 250ml
1 x PIX Hawk with accesories
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Xplorer3 anemometro
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x "S" set for boats
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Remote electric ignition system
1 x Parachutist
1 x Hot Glue Stick RED
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Flap hinge 33x9 mm (6 pcs)
1 x PPM Encoder Module
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Starter 12v (Max 90 and 15ccm)
1 x 1000 ml sealer (DOPE)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Cinta Goldfix 1m
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x 20x200 mm battery rings
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Steering arm 16 mm Ø 3 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Joint with bearing M3 22x5,5
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x 6 mm ball link M3 (10 pcs)
1 x Set stickers JEEMO "Andy"
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Support pump Xicoy X45
1 x Support FUEL DOT V3
1 x Tube support Ø 6mm (10 pcs)
1 x Fuselage Bags JEEMO
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Ball link M2 (10 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Ply-Span 450x600/13g Orange
1 x Monokote ROJO misil (1.8x0.65m)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Extension 90 cm (Futaba)
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Oracover Verde 2 m
1 x Prolongador S-Bus JR/JR 20cm
1 x Oracover Azul 2 m
1 x Gold antispark 5,5 mm plug
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Connectors DEANS 4 pins (1 pair)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Cabel "Y" 30 cm (Futaba)
1 x Oracover Brown 2 m
1 x Oracover Yellow CADMIO 10 m
1 x Extension PVC 150 cm (Graupner)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Aluminium servo arm (2 uds)
1 x Xplorer1 anemometro
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Hot Glue Stick BLACK
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Micro flex hinge (12 uds)
1 x Nitroverdu 500 ml
1 x Covered closure or fairings
1 x Profile ABS half cane 2.5x1000 mm
1 x Threaded coupler M2 (10 uds)
1 x Locking cable tie 4.6x203 (uds)
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x 1/4 Pilot "Heidi"
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x 1/6 Pilot "John"
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Profile ABS Square 2 x 1000 mm
1 x M3 Maxi ball link (2 uds)
1 x Recessed MPX connector support (6 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Socket head long ball link M3 (2 uds)
1 x Socket head long ball link M3 (6 uds)
3,310.08EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies