Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Turbina XICOY X240 compact
3,385.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Listón triangular de BALSA 6x6x1000 mm
2 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	Listón de PINO 6,0x6,0x1000 mm
1 x	Listón triangular de BALSA 8x8x1000 mm
3 x	Chaqueta Hispano Aviación
2 x	Sensor digital Air Speed con Pitot
1 x	PIX Hawk con accesorios
1 x	Camara USB micro endoscopica
1 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m
1 x	Varilla ABS 2,0x1000 mm
1 x	Prolongador cable servo POWERBOX 25cm
1 x	Acoplador M2 (10 uds)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Adaptador 3,2 mm M5 para cono 30 mm hélice fija.
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Adaptador 3,2 mm M6 para cono 40 mm hélice fija.
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Listón de CAOBA 1,5x1,5x1000 mm
2 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón de PINO 3,0x7,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x2,5 mm
1 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Listón de NOGAL 1,5x1,5x1000 mm
1 x	Listón de PINO 3,0x10,0x1000 mm
1 x	Batería Sanyo Eneloop RX 4,8 V JR
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Set de Humo "Planeador"
1 x	Sistema remoto de ignición eléctrica
1 x	Espuma expulsión paracaídas
1 x	Modulo PPM Encoder
3 x	Foco combo blanco/rojo
2 x	Resistencia 3W 5% 2R2
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
1 x	Pasador 1x8 mm (10 uds)
1 x	Rueda plastico 36 mm (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Anclaje carenado ruedas Ø 5 mm (2 uds)
2 x	Batería Sanyo Eneloop RX 6,0 V JR
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Arandela abierta 4.1 mm (20 pcs)
2 x	Arandela abierta 2.6 mm (20 pcs)
2 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
2 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Arandela dentada 2.2 mm (20 pcs)
1 x	Tornillo M2.2x6.5 (10 pcs) Especial cabinas, tapas servos
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Arandela dentada 4.3 mm (20 pcs)
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Arandela 4.3 mm (20 pcs)
2 x	Arandela 3.2 mm (20 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
2 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Polea de bronce 6/1,5 (2 pcs)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Tuerca hexagonal M3 (10 pcs)
1 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Arandela de bloqueo 4 mm (10 pcs)
1 x	Anclaje carenado ruedas Ø 4 mm (2 uds)
2 x	Arandela de bloqueo 3.5 mm (10 pcs)
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Rueda plastico 28 mm (2 pcs)
1 x	Polea de bronce 5/1,5 (2 pcs)
1 x	Arandela abierta 3.1 mm (20 pcs)
1 x	Adaptador de hélice 4 mm M6
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Arandela 1.7 mm (20 pcs)
1 x	Adaptador de hélice 5 mm M8
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Adaptador de hélice 5 mm M6
1 x	Tornillo M2.9x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo M2x8 (10 pcs)
1 x	Tornillo M2x6 PH
2 x	Arandela 2.7 mm (20 pcs)
1 x	Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Pin largo M2 (10 uds)
1 x	Anclaje carenado ruedas Ø 6 mm (2 uds)
1 x	Adaptador de hélice 3,2 mm M5
1 x	Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Tornillo M2x8 PH
1 x	Anclaje carenado ruedas Ø 3 mm (2 uds)
1 x	Tornillo M2x6 (10 pcs)
1 x	Arandela de bloqueo 2.5 mm (10 pcs)
1 x	Rueda plastico 30 mm tipo PIPER (2 pcs)
1 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Cartucho de humo Verde 100 g
1 x	Cartucho de humo Blanco 100 g
2 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Plancha de balsa 2,0x100x1000 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Batería Sanyo Eneloop RX 4,8 V Futaba
1 x	Batería Sanyo Eneloop RX 6,0 V FUT
1 x	Eje para motor Hacker A60-XS-V2 (112,5 mm)
1 x	Eje para motor Hacker A30-XL V2
1 x	Cono recambio 32 mm white
1 x	Listón de BALSA 2,0x2,0x1000 mm
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Batería Panasonic Eneloop AA 1,2 V 1900 mAh
1 x	Liston de BALSA 6,0x6,0x1000 mm
1 x	Destornillador Torx® TX6
1 x	Condensador 820 Addcap
1 x	Bateria LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Adaptador para motor A60-V2
1 x	FesEx-Uni6 System
1 x	Destornillador Torx® TX8
1 x	Bancada motor HACKER A50 aluminio
1 x	EDF Stream-Fan 110mm kv780
2 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
2 x	Tapón de combustible (Plateado)
2 x	Led Flash (naranja - 2 pcs)
1 x	Guías externas para antena de 2,4 GHz negras (2 pcs)
2 x	Servo-V-Limiter 5.2V
2 x	Interruptor magnetico (PCB) DPSI
2 x	Tapón de combustible (Negro)
2 x	Regulador X-40-SB-Pro
2 x	Regulador Master MEZON 120 Lite
2 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Alimentación doble)
1 x	DPSI RV Mini 6 (2008)
1 x	Led Flash (verde - 2 pcs)
1 x	Led (rojo - 2 pcs)
1 x	Bisagra PIN mediana (12 uds)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Adaptador de hélice 2,3 mm M5
1 x	Horn corto de latón M4 para cable (10 pcs)
1 x	Adaptador de hélice 3 mm M5 (corto)
1 x	Reductora BB motor 600 eje 3,2mm (1,75:1)
1 x	Disipador radial para motores MPJ AC 25/25-xx
1 x	Circlick para eje 1.5 mm (10 pcs)
1 x	Resistencia 3W 5% OR47
1 x	Luz tren delantero 18 mm
1 x	Disipadores de calor para LEDs Optotronix
1 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Bateria EMCOTEC LiIon 3000 7.2v

4,950.04EUR