1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Green smoke canister 65 g |
2 x | Initior Transmitter FTX2 Wireless |
1 x | Smoke set "S" |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Blue smoke canister 100 g |
2 x | Red smoke canister 140 g |
1 x | "S" set for boats |
1 x | Ventral support for AX-18/AX-60 |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Red smoke canister 100 g |
2 x | PCARD Wireless System |
2 x | Initior Receiver FRX2 Wireless |
1 x | Smoke set "Glider" |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Smoke set "M" |
1 x | B4-0 rocket charges (6 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Green smoke canister 100 g |
1 x | Blue smoke canister 140 g |
1 x | AX-60 starters (5 pcs) |
1 x | 3l Smoke oil |
1 x | Parachutist |
1 x | Remote electric ignition system |
1 x | Red smoke canister 65 g |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | |
2 x | Starter Sullivan-STAR 603 DINATRON |
2 x | 2,0x50 mm allen screwdriver |
1 x | Copier 5x20 cm pcs |
1 x | Starter 12v (Max 90 and 15ccm) |
2 x | Digital scale up to 40 kg |
2 x | Ball Link Plier |
3 x | Hot Glue Stick RED |
1 x | Z Bender - S Type Tool |
2 x | Z Bender - S Type Tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screwdriver for Torx® TX6 |
2 x | Screwdriver for Hexagon 1,5mm |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Screwdriver for Torx® TX8 |
2 x | Digital precision scale up to 2000 g |
2 x | Hot Glue Stick GREEN |
2 x | 3,0x60 mm allen screwdriver |
1 x | Cut tube |
2 x | Crimping tool |
3 x | 2,5x60 mm allen screwdriver |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Starter EM Gear Power 80 |
2 x | Hot Glue Stick BLACK |
2 x | Dust collector for mould cleaning |
2 x | Vacuum pump P1-N |
3 x | Ball Link Plier |
2 x | Screwdriver for Hexagon 1,27mm |
2 x | TP/TopFuel - XH 2/3S Adapter |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Strip 3,5x1,75x330 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Round Rod 1,5x1000 mm |
2 x | JETImodel SINGLE BEC |
1 x | PIX Hawk with accesories |
1 x | 4 LiPo XH>EH adapter |
1 x | ABS I Strip 10x5x1000 mm |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Strip 2,0x2,0x330 mm |
3 x | Adapter lead MPX/XT60 |
1 x | 30 cm BEC cable (female) |
1 x | CC 01 |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Round Rod 4,0x1000 mm |
2 x | PPM Encoder Module |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | MPX-Dean "T" Adapter |
1 x | Round Rod 1,25x1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Circlick securite |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Adapter lead MPX/EC3 |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | BEC 3A FOXY |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | Round Rod 2,5x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
1 x | CC 03 |
2 x | Strip ABS 2.0x3.0x1000 mm |
1 x | 30 cm BEC cable (male) |
2 x | 3 LiPo XH>EH adapter |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | TrainerCord (master-learner) |
3 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Softshell Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
2 x | Shirt Hispano Aviación |
1 x | White smoke canister 140 g |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | 1/6 Pilot "Cindy" |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Parachute expulsion foam |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | EASYGLIDER 4 RR |
1 x | Starter EM Gear Power 250 |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | White smoke canister 100 g |
1 x | Rubber Insert soft, 1 Pcs. |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | FOX 3000 mm, Fuselage (FMS) |
1 x | Green smoke canister 140 g |
1 x | Roller cutter 28 mm |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Sealing Iron Sleeve PROF |
1 x | Sealing Iron Profi LCD |
1 x | Steel brush wheel with 2.35mm |
5 x | 25 mm Sandpaper file |
1 x | Propeller POWER-PROP 7x7 |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
2 x | Glider Ka 7 Red (2540mm) |
1 x | Starter Sullivan-STAR 601 |
3 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | SBEC 40 |
1 x | Round Rod 5,0x1000 mm |
2 x | SBEC Jeti |
1 x | Extension 5 lipos JST - JST/C |
1 x | Male Prolonger TP 4/5S |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Multi-adapter balancer JST - TP |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Long Switch On/Off micro |
1 x | Round Rod 6,0x1000 mm |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Extra long horn 60x30 |
3 x | JETImodel DPS 40 |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | PSC 6 |
1 x | 5 LiPo XH>EH adapter |
1 x | DJI Mavic Air Fly More Combo |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Extension 2/3 lipos JST/C |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Interruptor RX/Batterie |
1 x | TS832 to Gopro AV/Power Cable |
1 x | MAX BEC 2 |
1 x | PSC 5 |
1 x | Round Rod 1,0x1000 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cap Hispano Aviación |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Charger SKY RC e680 |
2 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Ciano KAVAN Thick 20g |
1 x | BETA 1400 RTF Red |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | Tank BULL MØ1 4L (CMJets) |
3 x | Smart Soldering Iron 110W/230V AC |
2 x | Welder 100W/200V |
1 x | Tool for entel |
2 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Tool for entel |
1 x | Sealing Iron Sleeve STD |
1 x | EDF Stream-Fan 110mm kv780 |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Battery charging cable XT60 |
1 x | Turbo light spinner cap white 32mm |
2 x | |
1 x | Blade holder metal LAMA |
2 x | |
1 x | Cable coupler M3 (10 uds) |
2 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
2 x | BETA 1400 ARF Red |
1 x | Birch plywood plate 600x300x1.5 mm |
2 x | 45 mm aluminium spinner (Kavan) |
1 x | Cable coupler M2 (10 uds) |
1 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Conector MR-60 (pareja) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
2 x | Adaptadores carga 6s JST-XH |
3 x | Ciano KAVAN Thin 20g |
1 x | Debonder CA 20g |
3 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
2 x | Bags BULL Mo1 2.6m "Luxe" |
2 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
1 x | Fuselage BULL MØ1 2.600mm |
3 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
2 x | Pipa BULL MØ1 2.600mm |
1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
2 x | Pipa 3D BULL MØ1 2.600mm |
1 x | Wing Joiner BULL MØ1 2.600mm |
1 x | Sealing Iron STANDARD |
1 x | XT-60 Plug Mold |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Sub-D Plug Mold |
2 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
3 x | 100g Flux Paste for Silver Solder |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Fan for A60 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | JETImodel Addcap 1640 |
1 x | FesEx-Uni6 System |
1 x | Shaft for A60-L V4 |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Shaft for A60-L (140mm) |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 16x16 Slim |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 20x13 |
1 x | Propeller CFK 11x8 |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 16x16 Wide |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller CFK 16x13 |
1 x | Propeller CFK 12.5x6.5 |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | LS-8 GFK 6m Glider |
1 x | Helice FOXY 22x10 2-Bl |
1 x | Propeller KAVAN 32x12 2-Bl |
2 x | 3-blades 30x12 carbon prop Super Silence |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | Long adjustable control horn 3x34 |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Micro control horn (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | 3-blades 21x12carbon prop Super Silence |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | AXI 2814/20 V2 |
1 x | AXI 2820/14 V2 Long |
1 x | Q-12 X-light 2000 mm Electric |
1 x | GRAFAS MAXI ARF |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Quick hose connector 3-3 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Propeller G-Sonic 20x8 |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Antenna holder bracket double |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Neck strap JETI DS |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Small aluminium horn gold (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Indoor hinge with servo arm integraded |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Small control horn with bearing (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horns indoor |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 1000 ccm gasoline fuel tank |
1 x | 30x14 prop Super Silence |
1 x | 3-blades 20x10 carbon prop Super Silence |
1 x | 3-blades 29x12 carbon prop Super Silence |
1 x | |
1 x | 24x14 prop Super Silence |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 24x10 prop Super Silence |
1 x | 29x12 prop Super Silence |
1 x | |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 24x12 prop Super Silence |
1 x | 22x10 prop Super Silence |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 27x10 prop Super Silence |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 500 ccm gasoline fuel tank |
1 x | Tx JETI Duplex DC-24 II Carbon Line Gray |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Multimode |
1 x | Switch Button DS Tx DUPLEX |
1 x | SPARK Switch 7.4v |
1 x | Female connector for 16 pines AWG |
1 x | DPSI Ampere battery backer |
1 x | JETI Counter for DC-24 Carbon Design 3 |
1 x | Bag JETI Duplex |
1 x | Connector CAN 15 |
1 x | Female connector for 12 pines AWG |
1 x | Extension 5 lipos JST/C |
1 x | FX three-position switched channel, long |
1 x | Male connector for 20 pines AWG |
1 x | CC 05 |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2826/8 V2 |
1 x | AXI 2212/12 V2 |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | AXI 2217/16 V2 |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2814/10 V2 Long |
1 x | Crankcase gasket DA-100 |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Carburetorgasket DA-85, DA-100, DA-100L and DA-120 |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
2 x | EC-Cutter |
2 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | Escape DLE-60 Izda |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | ZENOAH/ZG 20cc |
1 x | Header ZG 45/62, "normal" |
1 x | Canister combo DLE 120 cc |
1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
1 x | Motor DA 50-R |
1 x | Extension 90 cm (Futaba) |
1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
1 x | Flybar support metal LAMA |
1 x | SIG Coverall 1.2x1.8 m |
1 x | Metal clevis M3 (10 uds) |
1 x | GRE-18 RTR Crawler 1:18 Blue |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | Ball bearing middle DA-50/DA60/VM120B2 |
1 x | MPX plug mold V1 |
1 x | Mini Lock Grips 2PCS |
1 x | Crimping tool |
1 x | Mold plugs XT-90 |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
2 x | Kwik link unmount tool |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Cilinder joint for G230RC/G260RC |
2 x | CILINDER FOR DLE 55RA |
1 x | Ignition for ZG motors |
1 x | Motor Moki 180 |
1 x | Motor Saito FG-100 TS, 100 cc |
1 x | Motor DA 100L |
1 x | Motor DA 150 |
1 x | Rear bearing for motor 35/40 cc |
2 x | Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA |
1 x | KAVAN CA Activator 150ml |
1 x | Lipo KAVAN 2200 mAh 11.1v 40/80C |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | Sandpaper file 13 mm |
1 x | Engine mounts for .09 - .19 engine |
2 x | Kavan Car 25% nitro 1l |
1 x | Cylindergasket DA 170 |
1 x | Ciano KAVAN Medium 20g |
1 x | DA-50R Prop Hub |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120 |
1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
2 x | Ciano KAVAN Super Thin 20g |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | Aluminium-screw, M5x16mm Red |
1 x | White smoke canister 65 g |
2 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Combustible Glow "KAVAN" air/heli 15% nitro |
1 x | Cylinder for DA-85/170 (1 piece) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210 |
1 x | Exhaust gasket DA-150 |
1 x | Digital weight, angle and balance meter BASIC |
1 x | |
1 x | Propeller diller for DLE170 |
1 x | Tachometer Hyperion Multi-pala |
1 x | Dean-T Plug Mold |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Handle for PERMAGRIT lime |
1 x | Tachometer HANGAR 9 digital |
1 x | Heli blades angle measurer |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | DLE 85 Ignition unit |
1 x | Carburetor DLE 170M |
1 x | ZENOAH ZG 62 SL |
1 x | Cylinder gasket ZG22 / ZG23 / G2D70 / G2D96-D |
1 x | Motor Moki S 500 cc 5 cylinders |
1 x | Fixing Ring with Base 60 mm |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | DLE Ignition 111/120/170 |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Exhaust gasket Valach 85 |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
1 x | Motor MOKI S 350 cc 7 cylinder |
1 x | Muffler DLE-120 Left |
1 x | ZENOAH ZG 80B |
1 x | ZG231cc SHL |
1 x | DLE 30 complete electronic ignition |
1 x | Moki Exhaust Bend 200 mm |
1 x | UMS radial-engine, 7 cylinder 90ccm, gas |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Piston ring for DLE-20 |
1 x | Gasket carburettor/insulator for ZG 38/S/SC |
1 x | Carburettor and crankcase nipple for ZG45SL, ZG62/S/SL and ZG74B |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | DLE 55 Ignition unit |
1 x | Pick up for motor Moki 250 cc 7 cylinders |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Castrol Oil A747 1l |
1 x | Combustible Glow "KAVAN" air/heli 10% nitro |
1 x | Motor ROTO-35 FS BM 4T |
1 x | Conector MT-60 (pair) |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Motor DA 170 |
1 x | 55 mm aluminium spinner (Kavan) |
1 x | SAVAGE Max Red 1080 mm |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Propeller balancer |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | ESC KAVAN PRO-160HV Opto 160 Amp |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Program card KAVAN PRO |
1 x | Fuel bottle 500 ccm |
1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Electric Fuel Pump 12v |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1053 MG 20.0kg |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Gasket electric Fuel Pump |
1 x | Servo GO-09 9g |
1 x | Round Rod 1.0x3.5 cm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Metal ball clevis M3 (10 uds) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | GRE-18 RTR Crawler 1:18 Orange |
1 x | LiPo KAVAN 3700 mAh 14.8v 40/80C |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | Maxi Fuel Filter |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | KAVAN Hand crank fuel pump |
1 x | FANTASY ARF 3.2m |
|
86,707.33EUR |