6.38EUR

Cyano INSTA - CURE™ (12g)
[BSI101]


Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with its freshness, gives a guaranteed 2 year shelf life. CAs are reactive monomers that chemically link (polymerize) when pressed into a thin film. The very thin layer of water moisture present on most surfaces acts as an alkali, or weak base, which is the catalyst that results in bonding; however, the presence of detectable amounts of water usually degrades the performance of CAs.

INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.


many units
many units

Reviews

Customers who bought this product also purchased
XT-90  connector (pair)
XT-90 connector (pair)

many units
many units

Tap FESTO 6-6 mm
Tap FESTO 6-6 mm

many units
many units

Nut for mounting M2 (4 pcs)
Nut for mounting M2 (4 pcs)

many units
many units

Carbon fiber rod 2.0 mmx1000 mm
Carbon fiber rod 2.0 mmx1000 mm

many units
many units

Carbon fiber rod 1.5 mm x 1000 mm
Carbon fiber rod 1.5 mm x 1000 mm

many units
many units

Carbon fiber rod 1.0 mm x 1000 mm
Carbon fiber rod 1.0 mm x 1000 mm

many units
many units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 1/12 Pilot "Langley"
3 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/6 Pilot "Tony"
2 x Pilot JAN 1/4 Saiplanes
2 x 1/12 Pilot "Fighter"
1 x Civilian pilot "Curt" size 9cm (Slimline)
2 x Pilot "Dick" Legends Series (Slimline)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
2 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "John"
1 x Pilot "Adolf" Legends Series (Slimline)
2 x Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x 1/6 Pilot "Garry"
2 x 1/4 Pilot "Heidi"
2 x 1/4 Pilot "Mike"
2 x Piloto Jet "Green" 1/6 Scale
3 x Civilian pilot "Pamela" size 9cm (Slimline)
2 x 1/6 Pilot "Cindy"
1 x 1/10 Pilot "Jimmy"
1 x Pilot "Duke" Legends Series (Slimline)
1 x 1/7 Pilot "Japanese"
1 x 1/12 Pilot "Cougar"
1 x Pilot "Anthony" (Slimline)
1 x Piloto jet 130 mm
1 x Plasti Dip Liquid Tape 429 ml black
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Paint gun for sprays
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x BALSA trip 3.0x5.0x1000 mm
1 x Threaded coupler M2 (10 uds)
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
3 x Liston HAYA 3 x 10 x 1000 mm
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Beech dowels 4.0 x 1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
2 x Trailing edge BALSA 35x8x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Pine wood slat 10x10x1000 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Screw-lock connector Ø 2 mm (2 uds)
2 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/10 Pilot "Jack"
2 x Propeller set 400 (2R+2L)
1 x P 17×5.8 Prop-2PCS/PAIR
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Pine wood slat 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x 3.2 mm Prop Adapter M6
1 x 3.2 mm Prop Adapter M8
1 x 10 mm Prop Adapter M12
1 x 5 mm Prop Adapter CN-Spinner
1 x 2,3 mm Prop Adapter M6
1 x 2.3 mm Adapter for 30 mm spinners
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x BALSA trip 5.0x5.0x1000 mm
1 x Glow starter with charger 230v
1 x Pine wood slat 1.5x3.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x 
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x White gelcoat 1 Kg
1 x 3 mm Prop Adapter M6
1 x 6 mm Prop Adapter M8
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x EXTRA 300 78" V3 Orange/Blue
1 x 82 mm INO spinner (carbon imitation)
1 x 63 mm INO spinner (carbon imitation)
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Propeller APC 10x4.7 SF Pusher
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x BOEING 727, Retract set for Boeing 727
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x BOEING 727 kit
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x Falcon Carbon Spinner 82mm for electric motor
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x Spinner INOVA 102 mm Black
1 x Cono NUT 5/16"x 24 -M4
1 x 51 mm INO spinner (carbon imitation)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x 70 mm INO spinner (carbon imitation)
1 x EDGE 540-A 74" (1880 mm)
1 x EXTRA NG 85" 2159mm yellow/blue
1 x Spinner INOVA 45 mm White
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x SKY RC Temperature Sensor
1 x Charger ISDT 608AC 200W
1 x Charger SKY RC e680
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x USB Charger 120-240V AC
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 12x4.5 MR Electric Pusher
1 x Propeller APC 11x7 Glow/Gas
14,079.65EUR
Manufacturers
Manufacturer Info
BSI
Other products
Languages
Español English
Currencies