1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (male)
1 x Cabling for Fox MDM1 wings
2 x CC 01
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Cabel charger transmitter GRAUPNER
1 x APM2.6 Power module with 5.3V DC BEC
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 2 LiPo XH>EH adapter
1 x CC 02
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Connector CAN 15
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
1 x Connector Sub-D 2+5 Female
2 x CC 05
1 x DPS Switch JR/JR
1 x CM-3
2 x 3 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Connector Sub-D 2+5 Male
2 x Dean "T" - Futaba Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 30 cm BEC cable (female)
1 x BEC 3A FOXY
2 x Interface Realflight Simulator
1 x TrainerCord (master-learner)
1 x Locking cable tie 3.2x142 (uds)
1 x Screw-lock connector M2 (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Locking cable tie 4.6x203 (uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cockpit plastic closing
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
2 x Cabin latch Fox MDM1 4m (pair)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x One touch canopy lock
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Aluminium alloy coupler for carbon tube 6/M4
2 x Screw-lock connector Ø 2 mm (2 uds)
4 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Covered closure or fairings
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 4 mm
2 x Big Crow DLE-170M
1 x Motor DLE 200cc Std
1 x Small Crow DLE-170M
1 x Motor DLE 200cc Premium Muffler
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Silent-blocks DLE 170M
1 x Spring lock washer 4.1 mm (20 pcs)
1 x SERVO HOLDER
1 x White smoke bombs AX-9 (10 pcs)
1 x Opto Gas Engine Kill Switch
1 x Jeti Black cap
1 x Oracover CARBON Metalic 1 m
2 x Support pump Xicoy X45
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
2 x GameCommander USB Universal
2 x EasyFLY Addon
1 x SIMtransmitter 6 Mode 2
1 x Double conector with JR adapter and 200 mm extension
1 x Foreman, scale 1:32
1 x 45 mm rods set for direction control
2 x Motor ACTRO 35-4-790
1 x SPS 70V 100/200 A
1 x TMM 2512-3S heli
1 x 41x5,5 mm wires output (2 pcs)
1 x 90 mm rods + T patellas set for direction control
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Aluminium sheet 500x250x0,5mm
2 x Wing bolts M3 Steel screw Red (2 pcs)
2 x Wheel collar 4 mm Ø (4 uds)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Beech dowels 4.0 x 1000 mm
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Electronic fog horn
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Clip fixing for wing (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Aqua RACE 70 (without motor)
1 x Clip mini fixing for wing (2 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
1 x 100 mm rods set for direction control
1 x Allen wheel collar M3x5
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Cable grommet Ø 5 mm (4 uds)
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x 80 mm rods set for direction control
1 x Split pin 1x8 mm (10 uds)
2 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x 140 mm rods + T patellas set for direction control
1 x Beech dowels 2.0 x 1000 mm
1 x 11 mm Rubber pads (14 pcs)
1 x 28 mm tailwheel unit
1 x 100 mm rods + T patellas set for direction control
1 x Bearing block for noseleg landing gear
1 x CC 11 Conector
1 x PSC 5
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x 31,0 mm propeller (rigth propeller)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Propeller APC 11x7 SF
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 11x8 Electric
1 x Propeller APC 13x8 Electric
2 x Propeller APC 12x6 Electric
1 x Propeller APC 10x7 SF
1 x Bags wings/rudder ASPIRE
1 x F-4 Phantom Scale 1:7, Electric retract landing gear
1 x Support Pitot JETI
1 x Tapa estado carga XT-60 (6 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Support XT60 conector (2 pcs)
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 10x4.7
1 x Propeller APC 12x10 Electric
1 x Propeller APC 11x7 Electric
2 x Propeller APC 10x5 Electric
1 x Propeller APC 13x6.5 Electric
1 x Propeller APC 11x10 Electric
1 x Propeller APC 11x4.7 SF
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 14x10 Electric
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 10x3,8 SF
1 x Propeller APC 13x10 Electric
1 x Propeller APC 10x10 Electric
1 x Propeller APC 10x6 Electric
1 x Propeller APC 14x12 Electric
1 x Propeller APC 12x6 SF
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 11x5.5 Electric Pusher
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 10x5 Electric Pusher
1 x F-16 Scale 1:6 (1.630mm)
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x F9F COUGAR Grey ARF 1.562 mm
1 x F-16 Falcon Black Knights 1:6 (1630 mm)
2 x L-39 Albatros 1:4.75, Electric retract landing gear
2 x Electric Landing Gear ASPIRE (Elektron Retracts)
1 x F9F COUGAR Red ARF 1.562 mm
2 x F-16 Scale 1:6, Electric retract landing gear
1 x ASPIRE Red ARF 2.000 mm
1 x Electric Landing Gear GALEB G4
1 x Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x ASPIRE Red ARF 2.000 mm, Canopy
1 x ASPIRE Navy ARF 2.000 mm
1 x Electric Landing Gear ODYSSEY
2 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Bags de Luxe ASPIRE
2 x Jet Pipe for ASPIRE 2m JMF
2 x Electric Landing Gear F9F COUGAR
1 x Bidule 111 3000 mm
1 x Bidule 111 3000 mm Canopy
1 x Recessed MPX connector support (6 pcs)
1 x Bidule 170 ARF 3.48 m
1 x CARBON CUB 15cc ARF 2280 mm
1 x Support conector MPX (6 pcs)
1 x Support Filtro FESTO
1 x SKY MASTER 3.000 mm ARF
1 x Pipa 3D F-16 Scale 1/6
1 x BOEING 727, Retract set for Boeing 727
1 x Wheel collar 6 mm Ø (4 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Window mounting channel 5m
1 x MEGA GEAR 16 3,1:1 Gearbox
1 x Excentric gearbox for 2,0mm axis (3,75:1)
1 x Planetary gearbox(3,33:1)
1 x STD excentric gearbox for 2,3mm axis (3,0:1)
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x Rudder 107-06
1 x L-Connector 1.5 mm x 1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Snap long M2 (10 uds)
1 x Cadena 1.0mm x 1 m
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Racor 3/3 mm
1 x Tap FESTO 4-4 mm
1 x T-Hose connector 3-3-3 mm
1 x Check valve quick hose connector 4-4 mm
1 x Conector FESTO G1/8 Quick 4mm 90º
1 x STD excentric gearbox for 2,0mm axis (4,5:1)
1 x Propeller Pleg CAM Carbon 7x4
1 x Excentric gearbox for 2,3mm axis (3,5:1)
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x Propeller RABOESCH M4 30 mm (3 Blades) (Right hydropropeller)
1 x Rigid coupling brass Ø 2 mm L: 15 mm
1 x 290x4 mm M4 shaft ship
1 x Regulador Actro-Marine 60A
1 x Motor ACTRO 28-4-880
1 x Regulador Actro-Marine 80A
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Allen wheel collar M4x4
1 x Propeller RABOESCH M3 30 mm (4 Blades) (Left hydropropeller)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x Cabestrante plastico 5x6 mm (10 pcs)
1 x Komet Pump
1 x Capstan of plastic 91x44x45 mm
1 x Cancamo Ms 7 mm (50 pcs)
1 x Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück
1 x Cannon 53/6 mm
1 x Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück
1 x Bocina Ms 18 mm (3 pcs)
1 x Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück
1 x Kardan Black (without pinions)
1 x Bocina 30 mm (1 pcs)
1 x Moki Exhaust Bend 200 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Propeller APC 20x8 Electric
1 x FALCON 24X9 CARBON PROPELLER (GAS)
1 x Propeller APC 7x6 Electric
1 x Propeller FALCON 5-BL 24x23.5
1 x Propeller MASTER 6x4
1 x Propeller MEJLIK 30x12
1 x Propeller APC 18x8 Electric
1 x F-16 Scale 1:6 Camuflaje Grey (1.630mm)
1 x Soporte grifo FESTO (2 pcs)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x EDGE 540-A 105" (2660 mm)
45,764.92EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies