Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice Falcon 22x12 eléctrica
105.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Regulador MasterBasic 90 Opto
1 x	Regulador X-70-SB-Pro 2-6S
2 x	Regulador X-70-OPTO-Pro
3 x	Regulador X-55-SB-Pro
2 x	Regulador MasterSPIN 100 Pro
1 x	Regulador X-30-Pro BEC
2 x	Regulador X-75-OPTO-Pro
2 x	Regulador MasterSPIN 75 Pro OPTO
1 x	Regulador MasterSPIN 80 Pro
2 x	Regulador X-40-SB-Pro
1 x	Regulador MasterSPIN 160 Pro
1 x	Regulador MasterBasic 40SB
2 x	Regulador MEZON 115 Opto
2 x	Tarjeta programadora RAY G2
1 x	Regulador MasterSPIN 66 Pro
1 x	Regulador Master MEZON 120 Lite
2 x	ESC RAY G2 R-60SB SBEC
1 x	Regulador Master MEZON 120
2 x	Regulador Hobbywing Platinum PRO 130A-HV V4
2 x	Regulador RAY G2 R-20B BEC
1 x	Perfil Acero Inox. 17.8x12.4x1000 mm
2 x	e-Looger V3
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
2 x	Varilla carbono 16 mm x 1000 mm
1 x	Perfil de ABS de media caña 2,0x1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Varilla carbono 20 mmx1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Canal de ABS de 2,0x4,0x1000 mm
2 x	Recambio lonas Hovercraft
1 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Varilla carbono 5.0 mmx1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Varilla carbono 14 mmx1000 mm
1 x	Canal de ABS de 1,0x2,0x1000 mm
2 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
2 x	Servo NARO Max Std
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 15.5x8.5x1000 mm
1 x	Conector ABS "T" 4.0 mm x 1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Conector ABS "L" 1.5 mm x 1000 mm
1 x	Varilla carbono plana 1000x3.0x1.0 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Bungee HLG Premium
1 x	Catapulta Vasa model
1 x	Bisagra de Flaps (6 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
2 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra de nylon 20x20x0,3 (10 pcs)
1 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra larga con pin metalico (6 uds)
1 x	Bisagra papel CA (12 uds)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Bisagra correa de latón en miniatura 1m
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra papel lite CA (12 uds)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
2 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
2 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Ball link M2 (10 pcs)
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Acoplador "Z" Ø 1 (2 uds)
2 x	Acoplador M3 (10 uds)
2 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Acoplador para cable M4 (10 pcs)
1 x	Acoplador M2 (10 uds)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x	Acople ALU M2,5 Ø 4 (2 uds)
2 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Helice APC 14x8.5 Electric Pusher
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Hélice POWER-PROP 14x9 Izda
2 x	Hélice POWER-PROP 14x9
2 x	DUPLEX 2.4EX Central Box 210
1 x	Piloto "Goose" (Slimline)
1 x	Varilla carbono 1.0 mm x 1000 mm
2 x	Bisagra 15 mm reforzada
1 x	Regulador MasterBasic 55SB
1 x	Plancha contrachapado Abedul 600x300x0,8 mm
1 x	Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
1 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Porta Kwik link M4 3 mm (2 pcs)
2 x	Round Rod 1,0x3,5 cm
1 x	Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	BABY planeador, planos (Aero-naut)
2 x	X-RAY Micro QR
1 x	AXI 2204 Multicopter
1 x	Fox 4000 mm con flpas (Airwold)
1 x	Polea de bronce 4/1,5 (2 pcs)
1 x	FOX MDM-1 3.500 mm ARF White
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	LO 100 ARC 3.3m,marco cabina
1 x	Gancho de lanzamiento regulable
1 x	Bancada servo gancho
1 x	Fox 4000 mm (Airwold)
1 x	Chili Race F3K (aramid nose)
2 x	Acoplador "Z" Ø 2 (2 uds)
2 x	Combo 4 pcs AXI 2204 Multicopter
1 x	Kwik link metálico M2 (10 uds)
1 x	ASH 31 6.08m Composite
2 x	Polea de bronce 8/2 (2 pcs)
2 x	Kwik link metálico M2,5 (10 uds)
1 x	Tensor de riostras M3 33x49 (2pcs)
1 x	Profundidad VENTUS 2cx 4.5m
1 x	DINO Glider ARC
1 x	Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x	DG-303 ACRO 3750 mm, cabina
2 x	Polea de bronce 10/2 (2 pcs)
1 x	Pin 1,6 para terminales riostras M1,6 ⌀ (6 pcs)
1 x	Fox MDM 1 4000 mm DeLuxe,bayoneta
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	X-RAY Micro QR (Profundidad)
1 x	Chili Race F3K (carbon biax)
1 x	Fox 4000 mm Airworld,marco cabina
1 x	Sistema para cables con tensor (rojo)
1 x	Set clevis para pull-pull (TY13233 y TY13234)
1 x	DG-303 ACRO 3750 mm (Airworld)
1 x	Tensor de riostras M2,5x27/43 (2pcs)
1 x	Extension MPX-MPX 20 cm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Terminales riostras M3 (10 uds)
1 x	Terminales riostras M2 (10 uds)
1 x	Varilla ABS 5,0x1000 mm
1 x	Varilla ABS 1,5x1000 mm
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	Liston ABS 1,5x3,0x1000 mm
2 x	Varilla carbono 1.5 mm x 2000 mm
2 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Soporte conector MPX enrasado (6 pcs)
1 x	Perfil de ABS de media caña 4x2.5x1000 mm
1 x	Soporte conector MPX empotrado (6 pcs)
1 x	Perfil de ABS rectangular 10x5,0x1000 mm
1 x	Soporte conector MPX (6 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte ECU Xicoy X-45
1 x	Soporte Pitot JETI
1 x	Soporte FUEL DOT V3
1 x	WINGO 2 PNP
1 x	SkyMaxx 1.550 mm (kit)
1 x	Rueda Scale 1/3 Vintage 240 mm / 9.33" (1 par)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Soporte bomba Xicoy X45
1 x	Perfil goma 8-2 mm 2M
1 x	Soporte conector XT-60 (2 pcs)
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Perfil de ABS de media caña 4x1000 mm
1 x	Perfil de ABS de media caña 5,0x1000 mm
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
1 x	Regulador PULSAR A-40
1 x	Perfil goma 6-2 mm 2M
1 x	Perfil de ABS triangular 4.0x1000 mm 60º
1 x	Perfil de ABS rectangular 12x6,0x1000 mm
1 x	Soporte Filtro FESTO
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Perfil de ABS triangular 2.0x1000 mm 90º
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Soporte Angular conector XT-60 (2 pcs)
1 x	Soporte bomba/flitro Xicoy X45
1 x	Perfil de ABS de media caña 7,0x1000 mm
1 x	Perfil goma 10-2 mm 2M
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	CHALLENGER Indoor
1 x	MAULE M-7-420 2.8m Rojo
1 x	BULLIT 60 Ala 1095 mm
1 x	CRACK YAK (Mini) 600 mm
1 x	ESC ALPHA 60A HV
1 x	Set motorización CHALLENGER Indoor
1 x	Valvula DUBRO neumatico (1 pcs)
1 x	Deposito DUBRO 3000cc-100oz
1 x	Deposito DUBRO 360 ml - 12 oz
1 x	Tapon DUBRO conversión glow/gasolina
1 x	Tygon DUBRO Medium 15m
1 x	Deposito DUBRO 1800cc-60oz
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Polea de bronce 16/2 (2 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Polea de bronce 12/2 (2 pcs)
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 140 mm con freno)
1 x	Amortiguador FEMA 300 Newtons
1 x	Rueda FEMA 100 mm / 6 mm
1 x	Tren aterrizaje ROCKET 400
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Arrancador EM Gear Power 80
1 x	Gancho remolque inferior plano
1 x	Racor 2/3 mm
1 x	Interruptor magnetico (PCB) DPSI
1 x	GameCommander USB Universal
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Rueda dentada 9724/09 para ZG 45
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (rueda 127 mm)
1 x	Soporte L para servo
1 x	Soporte reenvio para freno retractil
1 x	Amortiguador FEMA 400 Newtons
1 x	HOPPER tank Digitech 250 ml (Festo nipples 6 mm)

20,974.48EUR