1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Gorra Jeti Negra
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Film perforado 100 cm / 20 m
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x Manta bolsa de vacio 150 gr/m2 Bobina 100 m
2 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Manta bolsa de vacio 300 gr/m2 Bobina 1m
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x Plancha aluminio 500x250x0.5 mm
1 x Cartucho de humo Rojo 140 g
1 x Paracaidista
1 x Cartuchos de humo AX-60 mezclados (5 pcs)
1 x Iniciadores para AX-60 (5 pcs)
1 x Sistema remoto de ignición eléctrica
2 x Cartuchos de humo AX-18 blanco (5 pcs)
1 x PCARD sistema wireless
1 x Cartuchos de humo AX-9 blanco (10 pcs)
1 x Kit de montaje "S" para barco
2 x Cartucho de humo Verde 100 g
1 x Cartucho de humo Verde 65 g
2 x Cartucho de humo Blanco 65 g
2 x Cartucho de humo Rojo 100 g
1 x Kit de montaje "S" para avión
1 x Cartucho de humo Amarillo 65 g
1 x Motor A2212/13T
2 x Soporte ventral para AX-18/AX-60
1 x Set de Humo "S"
1 x Cartuchos de humo AX-60 negro (5 pcs)
1 x Cartucho de humo Blanco 100 g
1 x Iniciadores para AX-60 (5 pcs)
1 x Cartucho de humo Amarillo 100 g
1 x Iniciador FTX2 Wireless Transmisor
1 x Rótula larga M2 con bola/tornillo (6 uds)
1 x Rótula con bola M3 (10 pcs)
1 x Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x Tubo carbono conico 3K 10x5x0.3 x 880mm
1 x Alambre de cobre esmaltado Ø0,2 mm (5 m)
2 x Adaptador 2 LiPos XH>EH
2 x Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
1 x Listón de BALSA 3,0x3,0x1000 mm
1 x Listón de BALSA 3,0x5,0x1000 mm
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Brazo servo de carbono 25 mm
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x Servo HITEC HS-5084 MG
1 x Set de horns HS-65HB/MG, 5065MG
1 x Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x Servo AN-20 MGBBA
1 x Servo HITEC D941 TW
1 x Bancada aluminio servo (2 uds)
2 x Servo KST X08 Plus 9g HV servo
1 x Set de brazos de servo Hitec 40/50/55/5055 MG
1 x Soporte servo KST X08/H and Plus
1 x Brazos carbono para HITEC HS 65 (4 pcs)
1 x Servo HITEC HS-5475 HB Digi
1 x Brazo servo 38 mm Futaba con rótula
1 x Brazo servo doble pull-pull 24/30 mm Futaba con rótulas
1 x Brazo servo doble pull-pull 50/60 mm Futaba con rótulas
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Brazo servo 17 mm con rótula HITEC
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
2 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 30 mm, 100m
1 x Brazo servo 25 mm Futaba con rótula
1 x Extractor piñones 2.3/3.2 mm
2 x Gafas Flitemaster
2 x Cargas cohete B4-0 (6 pcs)
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Hoja Depron Aero 1250x800x3 mm
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Set piñones servo HITEC HS-645MG/5645MG/5685MH
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x Servo HITEC HS-81
1 x Set piñones servo HITEC HS-65 HB
1 x Servo HITEC HS-7985 MG High Torque Metal Gear Coreless Servo
1 x Servo HITEC HS-5805 MG Digi
1 x Servo HITEC HS-7245MH
1 x Servo HITEC HS-82 MG
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Gafas Nimbus
1 x Gafas Aspen
1 x Tubo carton cohete 25mm x 24mm x 230mm
1 x Adaptador 5 LiPos XH>EH
1 x Cable servos silicona 0,25 mm2 Graupner (5 m)
1 x Adaptador 4 LiPos XH>EH
1 x Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x Gafas Moritz
1 x Gafas Ace
1 x Gafas Nimbus "Black"
1 x Gafas Innovation Plus
1 x Gafas Stratus
1 x Cartuchos de humo AX-60 blanco (5 pcs)
1 x Carga cohete D9-7
1 x Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x Cable servos PVC 0,08 mm2 Graupner (5 m)
1 x Cable servos silicona 0,35 mm2 Futaba (5 m)
1 x Cable servos PVC 0,35 mm2 Graupner (100 m)
5,103.86EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas