Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
3 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	3 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	CM-3
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	30 cm BEC cable (male)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 03
3 x	JETImodel SINGLE BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
3 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x	Dean "T" - Futaba Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	SE Ring 300 mm (2 pcs)
2 x	ABS Strip 1.5x6.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Strip ABS 2.0x10.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
2 x	Round Rod 3,0x1000 mm
3 x	Round Rod 1,0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	Round Rod 2,0x1000 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	Round Rod 1,5x1000 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Strip 2,5x1,25x330 mm
2 x	Round Rod 1,25x1000 mm
3 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 2,5x1000 mm
2 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
3 x	Round Rod 6,0x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Strip 1,5x1,5x330 mm
2 x	Strip 3,5x1,75x330 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	Round Rod 4,0x1000 mm
2 x	SE Ring 200 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	ABS Strip 1.5x3.0x1000 mm
1 x
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Marker ties (20 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	Round Rod 5,0x1000 mm
2 x	Strip 2,0x2,0x330 mm
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Parachute expulsion foam
1 x	Parachutist
1 x	Oracover CARBON Metalic 1 m
1 x	SPS 70V 140/280 A
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
2 x	5 LiPo XH>EH adapter
1 x	DPSI Ampere battery backer
2 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Adapter lead MPX/EC3
1 x	Extension 5 lipos JST/C - JST
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Double conector with JR adapter and 200 mm extension
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS Remote switch actuator
2 x	SPARK Switch 7.4v
2 x	Landing gear Rocket 400
2 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
2 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Tape GFK 38 mm
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	GPS Expander Module
1 x	Y Cable
1 x	Spark motor OS Type F
1 x	Sparkplug NGK CM6
1 x	Gates hinge
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Pin hinge 34x16 mm (10 uds)
1 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
2 x	120x60 mm SLH KOVO wheel
1 x	SIMtransmitter 6 Mode 2
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller balancer
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	20x200 mm battery rings
1 x	JETImodel Addcap 1640
1 x	Female connector for 20 pines AWG
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector for 10 pines AWG
1 x	JETImodel DPS 40
1 x	Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x	Bearings for motors hacker A50
1 x	EDGE 540-A 105" (2660 mm)
1 x	Hacker X-Pro USB interface V2
1 x	Electronic switch JETI SP06 Opto
1 x	Extension 6 lipos XH > EH
1 x	Interruptor RX/Batterie
1 x	Female connector for 16 pines AWG
1 x	DPSI magnetic switch actuator (housing)
1 x	Female connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	Magnetic Interruptor MULTIPLEX
1 x	FX three-position switched channel, long
1 x	Male connector for 16 pines AWG
2 x	Male connector for 12 pines AWG
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Male connector for 20 pines AWG
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Extension 2/3 lipos JST/C
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	A40 Backmountset complete
1 x	Cable adapter iCharger
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Esc master MEZON 120 Lite
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Esc MasterBasic 70SB
1 x	Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x	A50 Motor Mount Alu complete set
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x	Propeller 8x4 Electric
1 x	Propeller POWER-PROP 12x9
1 x	Propeller POWER-PROP 13x9
1 x	KIRA 480-43 5,2:1
1 x	Actro 32-3 Heli MAX 5mm
1 x	GPS Logger Dymond
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller POWER-PROP 10x6
1 x	Propeller electric carbon 8.5x5
1 x	Propeller POWER-PROP 11x9
1 x	KIRA 600-20 6,7:1
1 x	PYRO 600-11
1 x	PYRO 650-103 Long Axi
1 x	KIRA 400-27
1 x	Xoar Electric Beechwood Prop 20x10
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG
1 x	Female connector for 12 pines AWG
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Connector Sub-D 2+5 Male
1 x	Multi-adapter balancer JST/C - TP
1 x	MPX-Dean "T" Adapter
1 x	Battery charging cable XT60
1 x	Adapter lead MPX/XT60
1 x	UBEC 6A KAVAN
1 x	PowerBox SparkSwitch RS
1 x	Motor B50 19 S & 6.7:1 gearbox
1 x	Xoar Electric Beechwood Prop 22x10

8,090.91EUR