Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 38 mm
3 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x
2 x	SE Ring 350 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 50 mm
1 x	Field folding model stand
4 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	Angle measurer
1 x	Medidor ángulos y/o incidencias
2 x	Spikes Band (5 m)
1 x	Field folding model stand SebArt
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle of incidence meter
1 x	20x200 mm battery rings
1 x	Covered closure or fairings
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Large flex hinge (12 uds)
2 x	Small pinned hinge (12 uds)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Bidule 55 V3 2460 mm
1 x	Extension silicon 100 cm (Futaba)
1 x	Horn 5/15 with M2 Bearing
1 x	A50 Motor Mount Alu complete set
1 x	Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
1 x	Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x	Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace)
1 x	Battery RX JETI LiIon RB 2600 7.2v
2 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	WingFix ULTRA Black Edition
1 x	Ring 320 mm length (5 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	80 mm rods set for direction control
1 x	Cockpit latch closing I=10 mm
1 x	45 mm rods + T patellas set for direction control
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Split pin 1.6x16 mm (10 uds)
2 x	SE Ring 250 mm (2 pcs)
2 x	SE Ring 360 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Propeller balancer
1 x	Landing gear frontal support 25x32x16
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Allen wheel collar M4x6
1 x	Lead with adhesive (2 pcs)
1 x	15 mm reinforced hinge
1 x	Allen wheel collar M3x3
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	Pilot "Adolf" Legends Series (Slimline)
1 x	LiPo Storage Box Type "BIG"
1 x	Battery bed V2_S (black)
1 x	Flap hinge (6 pcs)
1 x	Cockpit plastic closing
1 x	1/12 Pilot "Tom"
1 x	Snap pin for micro clevis (10 uds)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Gates hinge
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Canopy Latch
1 x	25 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Boomerang SPRINT V2 Red/White/Blue
1 x	TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x	Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Axle for motor A30-XL V2
1 x	Ball Bearings for motor A60-V2
1 x	RANGER Jet CANADA 1.854mm combo
1 x	A50 Backmountset complete
1 x	TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x	TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	TopFuel LiPo 25C-ECO-X 900mAh 2S
1 x	Boomerang ELAN STARS & STRIPES Combo
1 x	Cable adapter iCharger
1 x	TopFuel LiPo 35C-POWER-X 2400mAh 2S
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	TopFuel LiPo RX 25C-ECO-X 800mAh 2S
1 x	Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm
1 x	Axle for motor A50-L
1 x	Axle for motor A20-S (3 uds)
1 x	A30-M/L/XL Backmountset complete
1 x	Fan for A60
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	Screwdriver for Torx® TX6
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	Screwdriver for Torx® TX8
1 x	Propadapter for motor A50
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	Screwdriver for Hexagon 1,27mm
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	Boomerang SPRINT V2 Yellow/Black
1 x	RANGER Jet NAVY 1.854mm combo
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Propadapter for motor A60-V2
1 x	MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x	Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c
1 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	Lipo SMART 5000 mAh 4s 14.8v IC5
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	BULLIT Wing 840 mm
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 450 mm (2 pcs)
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	XPower XC4226/12 LS
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Central support Speed 600
1 x	Motor OS 3805-1200 electric
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	LiPo Storage Box Type "P"
1 x	Medium pin type hinge (12 uds)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Sukhoi 29S 2,6 m White/Blue (SebART)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Propeller 12x6 Falcon electric
1 x	PT 16x10 E Propeller
1 x	PT 20x13 EL Propeller
1 x	Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Cooler motor type 280
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	A60 Motor Mount Alu complete set
1 x	Indoor motor holder
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/12 Pilot "Fighter"
1 x	1/6 Pilot "Tony"
1 x	Jet Afterburner Simulator NF-Jet3 RY
1 x	NF-3m Heli Kit
1 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	NF-3 RC set
1 x	NF-1 RC set
1 x	NF-2 RC set
1 x	GPS Logger Dymond
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Plastic fan 17x48 mm (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Esc MasterSPIN 100 Pro

29,741.59EUR