1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
2 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
2 x Aluminium rod Ø 4.0 mm x 3000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
2 x Brass rod Ø 1.5 mm x 1000 mm
3 x Straightened rod Ø 4.0 mm x 1000 mm
2 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
3 x Straightened rod Ø 4.5 mm x 1000 mm
3 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Tube Pitot to PIXHAWK
2 x PIX Hawk with accesories
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Futaba 30 mm servo arm with M3 ball link
1 x 46 mm Futaba servo arm tandem with ball link
1 x Para-RC Mix
1 x Parachute PV6 for F3J
1 x Gates hinge aluminium (1 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 6 mm ball link M3 (10 pcs)
1 x Servoarm Aluminium SH-82
1 x BALSA triangular 10x10x1000 mm
1 x Smoke set "M"
1 x Flat Connector 4.0 mm x 1000 mm
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Wheel collar 5 mm Ø (4 uds)
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Wheel collar 2 mm Ø (4 uds)
1 x Futaba Aero Large Case - Internal Foam
1 x AL Axle Shaft 4.0x16 mm (2 uds)
1 x Futaba BLS152 - Upper Case
1 x FUTABA 6L + R3106 2.4GHz
1 x Soporte grifo FESTO (2 pcs)
1 x SAVOX SH 0254 servo
2 x Savox Brushless Servo SC-1267 SG
2 x Actuador lineal HLS12-100210-7.4v
1 x Servo BLUE Bird BLS-H71B v2
1 x Carbon plate 350x150x1.0 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Receptor MINIMA 6S HITEC
2 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Glass fibre sleeve Ø 20 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Ferrita 14x8x5.5 mm
1 x Paramotor BackPack XXS 2
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Servo HITEC HS-225 MG
1 x Servo HITEC HS-635HB Carbonite
1 x Servo HITEC HS-85 BB
1 x Servo HITEC HS-81
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Servo HITEC HS-45 HB, servo box
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Fiberglass plate 350x150x0.5 mm
1 x Aluminium sheet 500x250x0,5mm
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Servo FUTABA BLS 272SV
1 x SE Ring 400 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Cinta Goldfix 1m
1 x Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x Module 2.4GHz T-FHHS "F" Series
1 x Programador FUTABA USB CIU-3
1 x Futaba TM-24 "F" Series 2.4GHz T-FHSS Module
1 x SERVO S9177SV HV S-Bus2 Programable
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Tape GFK 25 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 350 mm (2 pcs)
2 x Tape GFK 38 mm
1 x Ring 320 mm length (5 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 
1 x 20x200 mm battery rings
1 x Foil for sticking flaps and ailerons
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x SE Ring 330 mm (4 pcs)
3 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x TWIST planeador gomas
1 x Servo BMS-4112
1 x 45 mm black plastic spinner for fixed propeller
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pick up DA50/100/150
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x 42 mm black plastic spinner for fixed propeller
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Reed valve for DA 50-R
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Piston ring for DA-50R and DA-100
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Carburetor for ZG45SL and ZG62/S/SL
1 x Cylinder for ZG20
1 x Piston ring for DA-150
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spring clamp for tube Ø50 mm
1 x Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC
1 x Tufnol Choke Lever Arm d=4,7mm
1 x Covered closure or fairings
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Piston ring for DA-60 and DA-120
1 x Piston ring for ZG 20 and G240RC
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Straightened threaded rod M2-1m
1 x Spare white 36-38 mm spinner
1 x 40 mm white plastic spinner for folding propeller
1 x Spare white 38-45 mm spinner
6,684.62EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies