50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Strip ABS 2.0x10.0x1000 mm
2 x Round Rod 1,25x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x ABS I Strip 10x5x1000 mm
2 x Round Rod 2,0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 4,0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
2 x Round Rod 3,0x1000 mm
1 x Strip 2,5x1,25x330 mm
2 x Strip ABS 2.0x8.0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x SE Ring 400 mm (2 pcs)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Straightened rod Ø 5.0 mm x 1000 mm
1 x SE Ring 360 mm (2 pcs)
2 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Tape GFK 38 mm
2 x SE Ring 330 mm (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x 20x200 mm battery rings
1 x SE Ring 480 mm (2 pcs)
1 x Foil for sticking flaps and ailerons
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Tape GFK 25 mm
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Cinta Goldfix 1m
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x SE Ring 450 mm (2 pcs)
2 x 
2 x Marker ties (20 pcs)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x SE Ring 250 mm (2 pcs)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x SE Ring 350 mm (2 pcs)
1 x Truck-trailer for gliders 720 x 285 mm
1 x Futaba Female 40 cm extension
1 x Futaba male 40 cm extension
1 x Cabel "Y" 15 cm
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 30 cm female (Futaba)
1 x Extension 100 cm (Futaba)
2 x Extension silicon 30 cm female (Graupner)
1 x Prolongador S-Bus JR/JR 10cm
1 x Cabel "Y" 30 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Premium servo extension 50cm
2 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 10 cm (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Circlick securite
1 x Premium servo extension 100cm
2 x Extension 15 cm (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x WingFix ULTRA Black Edition
1 x Extension 30 cm (Futaba)
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 10 cm (Graupner)
1 x Oracover Yellow CADMIO 2 m
1 x Plasti Dip Liquid Tape 429 ml black
1 x 800TVL CMOS camera for FPV
1 x Hardener Aero EPH 161 (500 g)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Pilot JAN 1/4 Saiplanes
1 x 1/6 Pilot "Garry"
1 x Micro flex hinge (12 uds)
1 x ABS I Strip 20x10x1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Support pump Xicoy X45
1 x Support FUEL DOT V3
1 x Field folding model stand
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
2 x Fresa corte diamante Ø 2.35mm (lentil)
2 x 22 mm Cut Disc Proxxon/Dremmel
2 x Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
2 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Kwik link unmount tool
1 x 55% silver electrodes (2 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Mini Lock Grips 2PCS
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Heli blades angle measurer
1 x Sealing Iron Sleeve STD
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Rubber Insert soft, 1 Pcs.
1 x PROXXON - SAW BLADE 8MM 0ZI220E
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x Horn mando long (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Micro control horn T2 Ø 1
1 x Brass control horn M2 large for wire (2pcs)
1 x Rudder forward 80x28 "type Kato"
1 x 6 mm M3 variable inclined horn
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Precision wrench L100 mm
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x Cotton Flocks, bag/ 500 g
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Cockpit plastic closing
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x Cockpit latch closing I=10 mm
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
2 x Ring 320 mm length (5 pcs)
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Propeller balancer
6,911.56EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies