Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	PT 20x13 EL Propeller
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	CM-3
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/4 Pilot "Mike"
2 x	BEC 3A FOXY
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	CC 03
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot JAN 1/4 Saiplanes
1 x	USB HLS prog. interface
2 x	Adapter lead MPX/EC3
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	JETImodel SINGLE BEC
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	3 LiPo XH>EH adapter
2 x	30 cm BEC cable (female)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	1/6 Pilot "John"
1 x	Dean "T" - Futaba Adapter
1 x	4 LiPo XH>EH adapter
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
3 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Locking cable tie 2.5x100 (uds)
2 x	9x4.7 * 22x12 carbon propeller
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Long pinned hinge (6 uds)
1 x	Green smoke canister 100 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Female connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	DPSI Ampere battery backer
1 x	EWC6 40 cm wing connector
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Female connector for 6 pines AWG
1 x	Extension 2/3 lipos JST - JST/C
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension 2/3 lipos JST/C
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Hacker X-Pro USB interface V2
1 x	CC 05
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
1 x	UBEC 6A KAVAN
1 x	1/6 Pilot "Garry"
1 x	SPS 70V 140/280 A
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Canopy Latch
1 x	11 mm Rubber pads (14 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Allen wheel collar M4x6
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	45 mm rods + T patellas set for direction control
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	6 mm aluminium horn with patella
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn 6/27 with M3 Bearing
1 x	Horn for flap control (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	5 mm M2 variable horn
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	20 mm carbon horn
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Shirt Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Cable control set
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Control horn long w/ball
1 x	Set propellers 5x3 Multicopter (2cw+2ccw)
1 x	Set propellers 10x4.5 SF Carbon Multicopter
1 x	Servo AN-8 HBA
1 x	Futaba 38 mm servo arm
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Futaba 54 mm servo arm with ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	ALU double servo arm 3 mm shaft
1 x	Extension MPX-MPX 20 cm
2 x	METEOR 1.000 mm kit
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Futaba 38 mm servo arm with ball link
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	Futaba 52 mm servo arm
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Futaba 2x20 mm servo double arm
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	Futaba 20 mm servo arm
1 x	Hitec 25 mm servo arm with ball link
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	XTorque CFK Servohebel 38
1 x	HITEC 20 mm servo arm with ball link
1 x	Hitec 38 mm servo arm
1 x	Hitec 20 mm servo arm
1 x	Hitec 52 mm servo arm
1 x	Hitec 46 mm servo arm with ball link
1 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 30 mm servo rounded arm
1 x	46 mm Futaba servo arm tandem with ball link
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Adapter rotula M3
1 x	Hitec 38 mm servo arm with ball link
1 x	17 mm servo arm with ball link DES Graupner
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	Futaba 46 mm servo arm with ball link
1 x	Conector MR-60 (pareja)
1 x	Jet Pipe for ULTIMATUM 2m
1 x	Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x	SPARK Switch 5.9v
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Male connector for 16 pines AWG
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x	Avia spare blue cockpit (Top Model)
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	CC 01
1 x	CC 02
1 x	1/6 Pilot "Buddy"
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	JETImodel DPS 40
1 x	SPARK Switch 12v
1 x	Extension 5 lipos JST - JST/C
1 x	SBEC 40
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Opto Gas Engine Kill Switch
1 x	Selfstart electronic switch
1 x	PSC 6
1 x	Male connector for 6 pines AWG

7,678.22EUR