2,179.91EUR

Tx JETI Duplex DC-24 II Carbon Line Ruby
[JETIDC24IICLR]


Scope of delivery
tray transmitter DC-24 II - Carbon Line Ruby (delivery condition mode 2, control mode very easy to change), built-in transmitter battery, charger for transmitter battery, sturdy carrying case, transmitter cross belt, DUPLEX 2.4EX REX 12 Assist.
Features
24 full control channels
3 HF modules (2x 2.4Ghz + 1x 900Mhz NG)
Colour display 4" (72x72mm)
Display slanted in the housing
New design of the graphical user interface (menu)
USB-C port (for charging / PC / MAC connectivity)
Audio transmission via Bluetooth to a headset (e.g. vario sound, announcements, alarms)
WLAN connection
Android / iOS app for telemetry display for smartphones
Weight reduced
4 model types (plane/helicopter/multicopter/boat, truck)
MP3 player
Telemetry processes up to 80 sensor values
Voice commands
Vibration alarm on the control sticks
Transmitter hardware
Multimode joysticks
Determination of stick positions by Hall sensors (without potentiometer)
Control travel resolution 4096 steps
Colour display, backlit
Rotatable stick agregate
All-aluminium joysticks/aggregates, adjustable length, ball bearings
internal memory
integrated Li-Ion battery for long operating time charger
Aluminium carrying case
Voice output
headphone jack
digital trims
lacquered aluminium case
Transmitter software
2.4 GHz DUPLEX EX
24 control channels
customisable menu
almost unlimited setting
almost unlimited number of model
Firmware update via USB / WLAN
ultra-fast control responses
Power management system for longer operating time PC interface
4 adjustable model types (airplane/helicopter/functional model/multicopter)
8 languages (EN / DE / CZ / FR / IT / PT / SE)
Telemetry
Voice output of telemetry warnings and telemetry
Display of telemetry data in real time on the transmitter display
Recording of telemetry data
PC transmission, storage and editing of telemetry
Saving (backup) of model data and transmitter settings on PC
900Mhz NG receiver system
The 900Mhz NG receiver is specially designed to work with the DC/DS-24. It is an independent, second transmission system in a second frequency range. If this system is used, the model can continue to be controlled even if the 2.4Ghz band is disturbed (e.g. by directional radio, during copter flights for TV transmissions, etc...). The 900Mhz NG backup system only becomes active if this occurs. In this way it serves essentially to increase the safety in high-quality models. Of course, this backup system can be activated or deactivated separately for each model. It is always used together with the 2.4Ghz transmission system, not individually.
Technical data
Dimensions [mm] 230 x 270 x 40
Weight [g] ~1400


Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Prolongador S-Bus JR/JR 20cm
1 x Extension lead 15 cm Multiplex
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x Cable S.BUS 3 salidas 300 mm
3 x Extension 100 cm (Futaba)
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Extension silicon 30 cm female (Graupner)
1 x Premium servo extension 75cm
3 x Circlick securite
2 x Premium servo extension 25cm
3 x Futaba Female 40 cm extension
2 x Extension 90 cm (Futaba)
4 x Futaba Female 40 cm extension
1 x Premium servo extension 100cm
3 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x Extension silicon 100 cm (Graupner)
2 x Extension silicon 35 cm male (Futaba)
2 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
3 x Cable silicona macho batt. receptor 30 cm (Futaba)
3 x Extension 30 cm (Futaba)
2 x Cable silicona macho batt. receptor 30 cm (Graupner)
2 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
3 x Cabel "Y" 30 cm (graupner)
2 x Cabel "Y" 30 cm (Futaba)
3 x Cabel "Y" 15 cm
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Turbina KINGTECH K320 G5
2 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Starter EM Gear Power 80
1 x Crimping tool
1 x Conector MR-60 (pareja)
1 x Adaptadores carga 6s JST-XH
1 x Ferrita 27x14x7 mm
1 x Ferrita 14x8x5.5 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip 2,0x2,0x330 mm
2 x Strip 3,5x1,75x330 mm
1 x Round Rod 1,25x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x Round Rod 1,5x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Stainless steel cable Ø 0.5 mm (2 m)
2 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Vasa model Catapult
2 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x One touch canopy lock
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Cabin latch Fox MDM1 4m (pair)
3 x Screw-lock connector Ø 2 mm (2 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Bungee HLG Premium
1 x Locking cable tie 4.6x203 (uds)
1 x Cockpit plastic closing
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Steering arm 16 mm Ø 4 mm
1 x Cap closure 33/23.5mm (2 uds)
1 x Carbon fiber rod 20 mmx1000 mm
1 x Joint with bearing M3 22x5,5
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Red smoke canister 100 g
1 x Horn 20x28,5 mm (2 pcs)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
2 x Extension 7.5 cm
2 x Extension silicon 30 cm male (Graupner)
2 x Futaba male 40 cm extension
2 x Extension silicon 35 cm (Futaba)
4 x Extension 15 cm (Futaba)
1 x Extension silicon 50 cm (Graupner)
2 x Extension silicon 25 cm (Graupner)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Extension silicon 25 cm (Futaba)
1 x Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x Couple M4 for wire (10 pcs)
1 x Adapter 3,2 mm M6
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
2 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Tubo espiral FESTO 6x1 Black
1 x LOWER TOW HOOK
1 x Oracover GREY Seafire Sea 2m
1 x DPSI magnetic switch actuator (PCB)
1 x Motor KAVAN PRO 2225-1600
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Racor 2/3 mm
1 x Strip 2,5x1,25x330 mm
1 x Short ball link M3 (6 uds)
1 x ABS I Strip 10x5x1000 mm
1 x Electric spoiler 250 mm (2 pcs)
1 x Bearing 3x6x2,5
1 x Cierva C30 simulated motor
1 x Baering 3x8x4
1 x Steering lever
1 x Screws flush mount M2
2 x Head spacer
1 x Blade holder center
1 x Balls 4 mm
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x BALSA triangular 15x15x1000 mm
1 x Carbon plate 350x150x3.0 mm
1 x Round Rod 2,0x1000 mm
1 x Baseplate servo
1 x A/C economy plywood 600x300x6+.0 mm
1 x ABS I Strip 20x10x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Round Rod 5,0x1000 mm
1 x SERVO DES 806 Pignons
1 x 15 mm floating pad (30 pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Quick hose connector 3-3 mm
1 x FESTO Filter 4 mm
1 x Quick hose connector 4-4 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x ABS Strip 1.5x6.0x1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Split pin 1x8 mm (10 uds)
1 x 45 mm rods + T patellas set for direction control
1 x 41x5,5 mm wires output (2 pcs)
1 x Cockpit metalic closing
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x Sanyo RX Battery Eneloop 4,8 V JR
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Extension silicon 75 cm (Futaba)
1 x Extension silicon 50 cm (Futaba)
1 x VIPER SL YELLOW PNP 2270 mm
1 x Brake controller for 28 and 36 mm Brakes
1 x SCHOCKJET ARF 2.050 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x JMB-Jets K8 Trainer Jet PNP 2050 mm
1 x BOEING 727, Electric brake 28mm + controller
1 x JP Hobby ER-120 Tricycle FELIX JR
1 x PC-21 XXL 3.395 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Brake for 140 mm wheels
1 x 200 mm extensión servo HITEC/JR
2 x Extension silicon 100 cm (Futaba)
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x SkyMaxx 1.550 mm (kit)
1 x MB339 CANADA PNP 1790 mm
1 x FELIX SportJet Blue 2200 mm
1 x BOEING 727, Jet pipe for Boeing 727
1 x FELIX JR Yellow/Black 1750 mm
1 x FELIX SportJet Red/Yellow 2200 mm
1 x VIPER JET G2 Esq. 2 White/Red
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x PC-21 2880 mm Electric Landing Gear
1 x VIPER SL Gold PNP 2270 mm
1 x VIPER 1.7 Electric break wheels + structure
1 x MIRAGE 2000 Camuflage PNP
1 x BOEING 727, Retract set for Boeing 727
1 x PC-21 2.880 mm (w/o oracover)
1 x Boeing (TX) T-7A RED HAWK
1 x VIPER JET G2 Esq. 2 Red/White/Silver
1 x PC-21 2880 mm Spinner 5Blade blue
1 x MIRAGE 2000 TIGER PNP
1 x PC-21 XXL Bags
1 x VIPER SL Thunderbird PNP 2270 mm
1 x FELIX SportJet Yellow 2200 mm
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x 5 mm Prop Adapter M8
1 x Lock washer 4.3 mm (20 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Quicklock washer 2 mm (10 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Wheel cover holder Ø 4 mm (2 uds)
1 x Lock washer 2.2 mm (20 pcs)
1 x 20-25mm Servo Arm
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x TRAINER RC Pilot V2 90" w/r ARF
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x BULLIT Wing 840 mm
1 x Oracover Black 10 m
1 x Oracover light Grey 2m
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x FESTO Blanking plug G1/8
1 x FESTO connector M7 barb fitting 4mm
1 x Lock nut M3 (10 pcs)
1 x ED Position Lights wireless (Set of 3)
56,845.03EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies