1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x e-Looger V3
1 x Servo NARO Max Std
1 x Recambio lonas Hovercraft
1 x Bateria arranque incl. compresor inflado
2 x Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x Piloto 1/10 "Jimmy"
1 x Cable acero trenzado Ø 0,5 mm (20 m)
1 x Suncover 100cc Red
1 x Cable acero trenzado Ø 0,62 mm (10 m)
1 x Horn de control para SlowFlyer (3 pcs)
1 x Soporte conector MPX empotrado (6 pcs)
1 x Soporte Pitot JETI
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Anclaje varilla mando Ø 2 mm prisionero/circlick (2 uds)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Abrazadera 3.2x142 (20 uds)
1 x Rótula con rodamiento M2,5 22x5,5
1 x Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x Piloto Jet "Red" 1/6 Scale
1 x Horn aluminio roscado 6 mm con rótula
2 x Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x Varilla acero Ø 5,5 mm x 1000 mm
1 x Piloto 1/12 "Langley"
1 x Sistema cierre 250 mm con abrazadera (2 pcs)
1 x Soporte bomba/flitro Xicoy X45
1 x Horn con ball 40x30
1 x Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x Varilla acero Ø 4,5 mm x 1000 mm
1 x Horn corto de latón M3 para cable (2 pcs)
2 x Cinta RUDDOG proteccion calor 2m x 50 mm
1 x Varilla acero Ø 3,0 mm x 1000 mm
1 x Rótula MAXI sin bola M3 (2 uds)
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Soporte conector MPX (6 pcs)
1 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Rótula con bola M3 (10 pcs)
1 x Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x Ferrita 14x8x5.5 mm
1 x Soporte bomba Xicoy X45
1 x Arandela 3.2 mm (20 pcs)
1 x Rótula larga M3 con bola/tornillo (6 uds)
1 x Ferrita con funda
1 x Abrazadera para escape de 50 mm
1 x Servo DITEX EL0510M
1 x CORTEX
1 x DEMON CORTEXpro
1 x Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Extractor piñones 2.3/3.2 mm
1 x Sistema cierre 330 mm con abrazadera (4 pcs)
1 x Sistema cierre 400 mm con abrazadera (2 pcs)
1 x Horn de mando corto ajustable 3x24
1 x Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x Horn aluminio pequeño amarillo (2pcs)
1 x Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Servo DITEX TD2612S
1 x Servo HITEC HS-5085 MG Digi
1 x Servo HITEC HS-311
1 x Caja servo HS-225MG/225BB/5245MG
1 x Sistema cierre 360 mm con abrazadera (2 pcs)
1 x Horn con ball 55x40
1 x Cinta tubuladora (5 m)
1 x Horn DUBRO 1/2A
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Sistema cierre 300 mm con abrazadera (2 pcs)
1 x Sistema cierre 450 mm con abrazadera (2 pcs)
1 x Gancho de remolcador
1 x Horn largo 50x26
1 x Cinta SURFACE 21mm x 5m
1 x Sistema cierre 240 mm con abrazadera (2 pcs)
1 x Sistema cierre 200 mm con abrazadera (2 pcs)
1 x Gancho de lanzamiento regulable
1 x Horn 16,5x20 mm (2 pcs)
1 x Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x Horn aluminio pequeño rojo (2pcs)
4,305.89EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas