26 x | Fresa corte diamante Ø 2.35mm (flame) |
4 x | 25 mm Sandpaper file |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | |
1 x | 100g Flux Paste for Silver Solder |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Dremel PERMAGRIT 18 mm round lime |
3 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Dremel 3000 130W |
3 x | Cut tube |
1 x | Dremel PERMAGRIT thin lime |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
2 x | Ball Link Plier |
3 x | 2,5x60 mm allen screwdriver |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Concave-Convex sandpaper file 13 mm |
2 x | Digital precision scale up to 2000 g |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | 55% silver electrodes (2 pcs) |
1 x | Dean-T Plug Mold |
4 x | Copier 5x20 cm pcs |
2 x | Digital scale up to 40 kg |
2 x | Crimping tool |
2 x | 1,5x50 mm allen screwdriver |
2 x | Copier 2x20 cm pcs |
2 x | EC-Cutter |
3 x | Ball Link Plier |
3 x | 2,0x50 mm allen screwdriver |
3 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
3 x | CC 03 |
2 x | Hot Glue Stick BLACK |
1 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Hot Glue Stick GREEN |
2 x | Z Bender - S Type Tool |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
3 x | DPSI Ampere battery backer |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Starter EM Gear Power 80 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
3 x | |
1 x | Circlick securite |
3 x | CC 05 |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
2 x | Vacuum pump 12 CFM |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
5 x | CM-3 |
1 x | 3 LiPo XH>EH adapter |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Z Bender - S Type Tool |
3 x | 5 LiPo XH>EH adapter |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Adapter lead MPX/EC3 |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Vacuum pump P1-N |
2 x | Adapter lead MPX/XT60 |
1 x | Starter EM Gear Power 250 |
1 x | Screwdriver for Torx® TX6 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Screwdriver for Torx® TX8 |
1 x | Crimping tool |
2 x | Cabling for Fox MDM1 wings |
2 x | 30 cm BEC cable (female) |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | 4 LiPo XH>EH adapter |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Jeti Black cap |
1 x | Remote electric ignition system |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Ventral support for AX-18/AX-60 |
1 x | White smoke bombs AX-18 (5 pcs) |
2 x | Smoke set "Glider" |
1 x | Yellow smoke canister 65 g |
1 x | Green smoke canister 65 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
2 x | White smoke canister 140 g |
1 x | Blue smoke canister 100 g |
1 x | Parachute expulsion foam |
1 x | AX-60 starters (5 pcs) |
2 x | Softshell Hispano Aviación |
1 x | White smoke canister 65 g |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Blue smoke canister 140 g |
1 x | "S" set for boats |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
3 x | Yellow smoke canister 100 g |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Parachutist |
1 x | 3l Smoke oil |
1 x | PCARD Wireless System |
1 x | Initior Transmitter FTX2 Wireless |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
2 x | Yellow smoke canister 140 g |
1 x | White smoke bombs AX-60 (5 pcs) |
2 x | Initior Receiver FRX2 Wireless |
2 x | Dust collector for mould cleaning |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Schul-Malpinsel Gr.5 |
1 x | Sandpaper file 13 mm |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Sealing Iron Sleeve PROF |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Steel brush wheel with 2.35mm |
1 x | Handle for PERMAGRIT lime |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
2 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | SERVO DES 707 BB MG |
1 x | MIG 29 3D RTF, Servo |
1 x | Tube support Ø 6mm (10 pcs) |
3 x | Servo HITEC HS-45 HB, servo box |
1 x | Rubber Insert hard, 1 Pcs. |
4 x | Servo HITEC HS-311 |
1 x | Kwik link unmount tool |
1 x | Servo HITEC HS-225 MG |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
4 x | Servo HITEC D645 MW |
2 x | Servo HITEC HS-5084 MG |
2 x | HITEC DPC-11 programmer |
3 x | wing/fuselage connector for 3 pines AWG 20-24 |
2 x | Servo HITEC HS-5087 MH |
2 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Servo inverter |
3 x | Connector Sub-D 2+5 Female |
2 x | 58 mm micro servo cover |
3 x | Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo |
4 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
3 x | Servo HITEC HS-45 HB |
3 x | Male connector for 10 pines AWG |
1 x | Mini Lock Grips 2PCS |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
4 x | Servo HITEC D131 MW nano |
1 x | DC Small for MultiLog & UltraLight |
3 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Servo FUTABA SBL 471 SV |
2 x | MAX BEC 2D plus EX |
2 x | Short Switch On/Off micro |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | TrainerCord (master-learner) |
3 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | SBEC 40 |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | 2 LiPo XH>EH adapter |
2 x | Connector CAN 15 |
1 x | BALSA trip 3.0x5.0x1000 mm |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | Connector Sub-D 2+5 Male |
3 x | BEC 3A FOXY |
1 x | |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | Dean "T" - Futaba Adapter |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cable Cargador FUTABA |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
2 x | AX-60 starters (5 pcs) |
1 x | White silicone 0,25 mm² wire (25 m) |
2 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Red smoke canister 140 g |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Vest clothes Hispano Aviación |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Paramotor BackPack XXS 2 |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Oracover CHROME 2m |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Retract undercarriage |
1 x | Altimeter Altis V4 |
3 x | Keypad ALTIS V4 |
2 x | Cap Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
2 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
2 x | 3,0x60 mm allen screwdriver |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | 13 mm wing servo holder |
1 x | 65 mm mini servo cover |
1 x | 50x45 mm micro-mini servo cover |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | SPS Remote switch actuator |
2 x | Servo slow down unit (0,7-14,7 sec ) |
2 x | PWC4 wing/fuselage connector for 4 servos |
1 x | SWTU2 switch |
3 x | Female connector for 12 pines AWG |
1 x | Wing Joiner ULTIMATUM 2.0 m |
2 x | Three-position switched channel, short |
2 x | Tank GFK Opus/JEt 300 ml |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
3 x | Tank ULTIMATUM 2.0 (3.2 L) PRO |
2 x | Servo HITEC HS-7245MH |
1 x | EWC6 40 cm wing connector |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
2 x | SPARK Switch 12v |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | 19.5x13 Falcon electric 3-Blade carbon prop (54 g) |
1 x | Propeller 12x6 Falcon electric |
3 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
2 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | Servo HITEC HS-225 BB |
3 x | Servo lock HS-80/81/82/85 (2 pcs) |
2 x | Servo HITEC HS-125 MG |
2 x | Servo HITEC HS-5475 HB Digi |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | Servo HITEC D85 MG |
2 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
3 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
3 x | Servo Digital HITEC HS-5065 MG |
3 x | Servo HITEC D941 TW |
1 x | Servo HITEC D954 TW |
3 x | Receptor MINIMA 6S HITEC |
2 x | Servo HITEC HS-5085 MG Digi |
2 x | Servo HITEC D625 MW |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo HITEC D950 TW |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
3 x | Servo HITEC D951 TW |
3 x | CC 02 |
3 x | 57 mm micro-mini servo cover |
2 x | CC 11 Conector |
2 x | Servo TOPMODEL DS1413 T |
2 x | Servo TOPMODEL DS9010 T |
3 x | 11 mm wing servo holder |
1 x | 90x75 mm standart servo cover |
2 x | TMM 1210-3S heli |
2 x | 40 mm servo arm with bearing (2 pcs) |
1 x | TMM 2512-3S heli |
1 x | HBC 10035-3 32-Bit |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | 90x60 mm standart servo cover |
4 x | PSC 6 |
3 x | PSC 5 |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Servo HITEC HS-65 MG |
1 x | Servo HITEC HS-7954 SH Digital High |
1 x | Servo HITEC HS-53 |
2 x | Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts) |
1 x | Servo HITEC HS-81 |
2 x | Multi-adapter balancer JST/C - TP |
2 x | FX three-position switched channel, long |
2 x | Servo HITEC HS-5485 HB Digi |
1 x | Servo HITEC HS-65 HB |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Servo HITEC HS-645 MG |
2 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
2 x | SPS 70V 140/280 A |
2 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Servo HS-7980TH digi high voltage ultra torque |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Multi-adapter balancer JST - TP |
2 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | SPARK Switch 5.9v |
2 x | Selfstart electronic switch |
2 x | MPS Gas-Cap-Powerswitch |
2 x | SBEC Jeti |
1 x | Servo HITEC HS-5685MH |
2 x | Set Micro-horns HS-60/81/85 |
2 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Servo HITEC HSB-9380TH |
1 x | Servo HITEC HS-7955 TG Coreless Digi |
1 x | Servo HITEC HS-85 BB |
1 x | Male connector for 16 pines AWG |
1 x | MPX-Dean "T" Adapter |
2 x | Servo HITEC HS-5245 MG Digi |
2 x | Female connector for 6 pines AWG |
2 x | MAX BEC 2 |
1 x | Switc electronic 30 Amp |
2 x | Propeller POWER-PROP 7x7 |
1 x | Servo HS-5565MH High Voltage |
2 x | Servo HITEC HS-635HB Carbonite |
1 x | Servo HITEC HS-56 BB |
2 x | Opto Gas Engine Kill Switch |
2 x | Hacker X-Pro USB interface V2 |
2 x | SBEC 30 D |
2 x | SPARK Switch 7.4v |
2 x | Male connector for 6 pines AWG |
1 x | Servo HS-5765MH High Voltage |
1 x | PowerBox SparkSwitch RS |
2 x | Servo HS-5070 MH Hi Volt |
1 x | Micro Switch button |
2 x | Jet Pipe for ULTIMATUM 2m |
1 x | JETImodel Addcap 1640 |
2 x | Pins M connect Multipin connectors AWG 20-24 |
2 x | Servo HITEC HS-77 BB Low Profile |
2 x | USB interface ALTIS |
1 x | Servo HITEC HS-82 MG |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Servo HITEC HS-75BB Retract |
2 x | EWC3 100 cm wing connector |
2 x | Male connector for 20 pines AWG |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | MAX BEC |
2 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
1 x | DPS Switch JR/JR |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | Servo HITEC HS-7985 High Torque Metal Gear Coreless Servo |
2 x | Switching module high voltage SXH |
2 x | Servo HITEC HS-5645 MG Digi |
1 x | Oracover Azul Cielo 2 m |
1 x | AC-10 pre-rotacion with motor |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Suncover 100cc Red |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | 82 mm aluminium spinner. |
1 x | USB Adaptor OPTronics |
1 x | Blind nut M6 (4 pcs) |
1 x | Electronic double valve landing gear |
1 x | Aluminum Fold Prop Spinner 38 mm / 5 mm |
1 x | FANTEX 4xx turbina |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | Aluminium servo arm (2 uds) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Jeemo Dolly |
1 x | 30 cm BEC cable (male) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Wings Bags JEEMO |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Telemetry interface ALTIS 12 cm |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | PIN Connector female (100 pcs) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
2 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | PowerBox MERCURY SR2 |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Rudder 2_Tray 3.5~4 inch |
1 x | Servo MKS HV747 |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Green smoke canister 140 g |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Conector Servo female 4 pines |
2 x | Interruptor RX/Batterie |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
2 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | 50N turbine start protection tube |
2 x | Servo HITEC D145 SW |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | Propeller VESS 32A |
1 x | Propeller MENZ-S 16x6 |
1 x | Propeller MENZ-S 16x8 |
1 x | Propeller MENZ-S 20x6 |
1 x | Propeller MENZ-S 21x10 |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | Opto Gas Engine Kill Switch |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | Propeller MENZ-S 16x12 |
1 x | Propeller MENZ-S 20x12 3 blades |
2 x | Extension 2/3 lipos JST/C |
1 x | Female connector for 10 pines AWG |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Male Prolonger TP 4/5S |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Wheel 38 mm V2 |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Servo HITEC HS-785 HB |
1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Tank gas KUZA 260 cc |
1 x | EDGE 540 1.73m SEAGULL Model |
2 x | Servo HITEC HS-5585MH |
1 x | 28x12 prop Super Silence |
1 x | Helice FOXY 22x10 2-Bl |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Vess propeller 13x6 S |
2 x | Extension 5 lipos JST/C |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Propeller MENZ-S 18x10 3-Blades |
1 x | Propeller MENZ-S 17x10 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | Long Switch On/Off micro |
1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
2 x | Extension 2/3 lipos JST - JST/C |
2 x | Male connector for 12 pines AWG |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
3 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Gear carbonite set HITEC HS-6965 |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Servo HITEC HS-485 HB |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cono NUT 5/16"x 24 -M4 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Xplorer4 anemometro |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Oils Pumps Empty (1 liter) |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Tube bender |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fuel tank 500ml (17oz) |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | 1000 cc gasoline fuel tank complet |
1 x | Xplorer2 anemometro |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Spinner plastic white fixed propeller 45 mm |
1 x | Fuel tank 1500ml (50oz) |
1 x | 550 cc gasoline fuel tank complet |
1 x | 89 mm aluminium spinner. |
1 x | FIALA Propeller 26x10 |
1 x | Servo TOPMODEL S7520 MG |
1 x | FIALA Propeller 28x10 |
1 x | 26x12 prop Super Silence |
1 x | FIALA Propeller 23x10 |
1 x | FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS) |
2 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | FIALA Propeller 27x10 |
1 x | 24x12 prop Super Silence |
1 x | 29x12 prop Super Silence |
1 x | |
1 x | USBCOM 5i |
2 x | Interruptor SPS 70v 60/120A |
1 x | Propeller MENZ-S 20x8 |
1 x | JETImodel DPS 40 |
1 x | Propeller MENZ-S 19x8 |
1 x | Propeller MENZ-S 21x12 |
1 x | Propeller MENZ-S 17x6 |
2 x | Extension 5 lipos JST/C - JST |
1 x | SPS 70V 100/200 A |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | Propeller MENZ-S 15x6 |
1 x | Propeller MENZ-S 18x6 |
1 x | UBEC 6A KAVAN |
1 x | Extension 5 lipos JST - JST/C |
1 x | CC 01 |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Propeller MENZ-S 16x10 |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller MENZ-S 15x12 |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Extension 6 lipos XH > EH |
1 x | Female connector for 20 pines AWG |
1 x | Electronic switch JETI SP06 Opto |
1 x | ALBATROS L-39 G2 "Camo Tiger" Turbine ready |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Gear set HITEC HS-56 HB |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Servo HITEC HS-7115 TH |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | Gear set HITEC HS-55 |
1 x | Servo HITEC HS-7950TH Ultra Torque HV Coreless Titanium Gear Ser |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Gear set HITEC D645 MW |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
|
42,140.83EUR |