Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Quick hose connector 4-4 mm temporarily out of stock	Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock
Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) temporarily out of stock	Servo HITEC D951 TW temporarily out of stock	Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Jet Pipe for ASPIRE 2m JMF
1 x	Jet Pipe 160N-250N (120/130 mm)
1 x	Tailormade cone A-10 Skymaster
1 x	30 cm BEC cable (male)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Extension 100 cm (Futaba)
2 x	Strip 3,5x1,75x330 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Balsa panel 1.5x100x1000 mm
1 x	1/7 Pilot "Japanese"
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Extension silicon 30 cm female (Futaba)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Screw-lock connector M2 (2 uds)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Adjustable brass horn threaded M3
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	AX-60 starters (5 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	Horn 6/20 with M3 Bearing
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Green smoke canister 65 g
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Initior Receiver FRX2 Wireless
1 x	Xplorer1 anemometro
1 x	Oracover Azul 2 m
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	12.7 mm 2:1 black termoretract tube
1 x	PIX Hawk with accesories
1 x	MYLAR film A350 (1000x500 mm)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	19 mm 2:1 black termoretract tube
1 x	30 cm BEC cable (female)
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Release film 100 cm x 50 m
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Styrene plate 320x120x1.0 mm
1 x	Round flex hinge (12 uds)
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Indoor hinge with servo arm integraded
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Round Rod 4,0x1000 mm
1 x	Futaba BLS255/272/471SV - Gear Set
2 x	ABS Strip 1.5x4.0x1000 mm
1 x	Double aluminium servo arm V1-Futaba 2,5 inch M3 (red)
1 x	Blue aluminium servo arm V3-Hitec 1,25inch M3
1 x	Blue aluminium servo arm V3-Hitec 1,5inch M3
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Cable with accesories
1 x	Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x	Xplorer3 anemometro
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Cable control set
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	Blue aluminium servo arm V2-Hitec 1,75" inch M3
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Miniature brass strap hinge, 1 m
1 x	Micro flex hinge (12 uds)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Strip 2,0x2,0x330 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)

3,200.32EUR