Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

ULTIMATUM 2.0 PRO "Joker 7N"
2,900.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Motor DA 60
2 x	Motor DA 100L
1 x	Motor DA 170
1 x	Motor DA 200 Magnesium
2 x	Motor DA 50-R
2 x	Motor DA 150
2 x	Escape Muffler KS86 V hasta 65 cc
2 x	Bancada trasera motor gasolina 38 mm
2 x	Captador RCEXL para DA
1 x	Escape Pitts D.A. 150 (2 pcs)
1 x	Codo escape Diam. 12 mm x 0.4 mm
2 x	Codo escape 90º ø 25 mm
3 x	Canister combo DLE 55 cc
2 x	Escape Pitts D.A. 70 (2pcs)
2 x	Captador OS GT 33 cc
1 x	Escape Muffler KS86 S-6 hasta 65 cc
2 x	Escape Pitts D.A. 170 (2 pcs)
2 x	Colector admision 90º Largo
1 x	Codo escape 90º ø 25 mm
2 x	Codo escape Diam. 25 mm x 0.5 mm
1 x	Capuchón BOSCH para bujía ZG 26SC/SCM, 231SLH, G230RC
1 x	Spring Clip para tubo teflón 16 mm
1 x	Tubo teflon Dia. 28x15 mm para escape
2 x	Junta motor DA 50
1 x	Filtro combustilbe SE-M
2 x	Spring Clip para tubo teflón 25 mm
2 x	Brazo ext. carburador Tufnol d=4.7mm
2 x	Válvula llenado D.A.
1 x	Tester CDI Rcexl
2 x	Soporte de alumino motor DA-50R
2 x	Junta metálica para codo/cilindro DA85/DA170
1 x	Soporte trasero 15 mm para motor gasolina
1 x	Soporte trasero 7 mm para motor gasolina
2 x	Pendulo 27g
2 x	Tubo teflon Dia. 25x5 mm para escape
2 x	Codo DA-60 Drop 50mm Ø25mm
3 x	Juntas carburador para SAITO FA80/80GK/72/72GK
1 x	Junta stack Ø 28 mm DA75/150B2
2 x	Membrana carburador para motor ZG 20/22/23/26/31
1 x	Junta motor DA 50
1 x	Filtro de gasolina grande
1 x	Escape MTW TD 120K
1 x	Escape acero inoxidable D.A. 35-70
1 x	Filtro aire 48 mm foam azul 3W
1 x	Interruptor OPTO Gas Engine
1 x	Núcleo del buje del rotor
1 x	Arandela de la rueda
1 x	Varilla de mando para la cabeza del rotor
1 x	Paneles Laterales
1 x	Timón
1 x	Soporte del timón (2 pcs)
1 x	Mamparo posterior
1 x	Grub screw M3x3 shouldered (2 pcs)
2 x	Rodamiento 3x8x4
3 x	Enganche de las palas del rotor
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Motor DLE 30 cc V2
1 x	Aceite DELUXE turbine Jet Oil 1 litro
3 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
2 x	Perforador hélices para EME35 y DLE35
1 x	Escape Pitts D.A. 120
1 x	Soporte trasero 20 mm para motor gasolina
1 x	Codo escape Diam. 18 mm x 0.5 mm
1 x	Cargador LiPo Charger4
2 x	Cargador Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Motor DA 120
1 x	Bomba KP500V Kingtech
1 x	Tubo Teflon Ø28 mm x 10cm
2 x	Escape Krumscheid 81-6 hasta 55 cc
1 x	Turbina KINGTECH K85 G4
1 x	Soporte de alumino para escapes Ø 65-75 mm
2 x	Filtro de gasolina de pórex
1 x	Escape acero inoxidable D.A. 50/100/120
1 x	Turbina KINGTECH K100 G4
1 x	Aceite turbina KINGTECH 10L
2 x	Escape con silenciador trasero para DA-120
1 x	Tubo teflon Dia. 20x10 mm para escape
1 x	Junta stack Ø 25 mm GP-61/123
1 x	Soporte de alumino para escapes Ø 50-60 mm
1 x	Junta metálica para codo/cilindro DA50R/DA100
1 x	Soporte trasero 50 mm para motor gasolina
1 x	Perforador hélices para DLE111 y DA85-150
1 x	Tubo escape flexible acero inox. Dia.25 mm x 30 cm
1 x	Prolongador motor XXL Blazing 60-83 mm
1 x	Casquillo para grimpar cable de 0,70 mm (10 pcs)
1 x	Bancada motor ZG38/38S/38SC, Long: 36 mm
1 x	Junta stack Ø 25 mm DLE 55 ZDZ 50-100B2, 3W60/120B2, ...
1 x	Carro remolque para veleros 720 x 285 mm
1 x	Colador protector turbina K140/180/210
1 x	Pendulo "Special" depositos 75g
1 x	Tubo Teflon Ø25 mm x 10cm
2 x	Extension escape Ø25 mm x L: 60 mm
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Aditivo antiestatico JETCAT 120 ml
1 x	Pendulo "Special" depositos 60g
1 x	Cierre cubiertas o carenados
1 x	Colador protector turbina 94 x 32 mm
1 x	Bancada motor ZG45/62, Long: 54 mm
1 x	Escape Pitts en kit para CAP 21
1 x	Cilindro ZG-20
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x	Pipa Jet REVEL titanio/aluminio
1 x	Filtro de gasolina
1 x	Junta stack Ø 25 mm DLE55/DLA56/3W60/DA50/DA100B2/DLE111/DLA112
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Avia, cabina azul(Top Model)
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Pipa Resonador Acero inox. 45-80 cc
1 x	BULLIT Ala 840 mm
1 x	ALBATROS 3.0 m (naranja/blanco)
1 x	Albatros rojo/blanco (Top Model)
1 x	Bidule 170 ARF 3.48 m
1 x	Bancada servo ala 13 mm
1 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	BULLIT 60 Ala 1095 mm
1 x	Cabina Sweet / Siesta
1 x	AXI 2212/26 V2
1 x	Encendido ROTO 25V
2 x	A60-6XS V4 28-Pole
1 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Parte inferior del rotor
1 x	Bahía de la batería
1 x	Tornillos M3x16
1 x	Ball joint long
1 x	MIG-29 EDF
1 x	F9F Panther Mono-turbina (Aero-naut)
1 x	Ventanilla de 14 mm para tornillos (10 pcs)
1 x	Frenos Cuchillo 250 mm / 16 mm
1 x	Bisagra de compuerta/Flaps
1 x	AXI 2826/12 V2
1 x	Brazo servo 17 mm con rótula FUTABA
1 x	AXI 2212/12 V2
1 x	AXI 2820/12 V2
1 x	Motor A50-12 L Glider
1 x	Brazo servo Futaba tandem 54 mm con rótula
1 x	AXI 2814/10 V2 Eje largo
1 x	Motor A10-7 L 4,4:1
1 x	AXI 2820/10 V2 Eje largo
1 x	Motor A20-6 XL 10 Polos + 4,4:1 EVO
1 x	AXI 2826/6 V2
1 x	AXI 2820/10 V2
1 x	Motor MVVS 2.0/1120
1 x	Brazo servo doble pull-pull 76/92 mm Futaba con rótulas
1 x	Combo FOXY C3530-570 + FOXY 80 amp
1 x	Muleta 38 mm aluminio M8 Eje 8 mm "Z"
1 x	Set Radial para Hacker A30-M/L/XL
1 x	Set Radial para Hacker A50
1 x	Hélice POWER-PROP 15x10
1 x	Autogiro LA500
1 x	Soporte del rodamiento frontal LA500
1 x	Hélice POWER-PROP 13x9 Izda
1 x	Hélice POWER-PROP 12x8
1 x	Tuerca M1,6
1 x	Soporte cental de las palas del rotor
1 x	Head spacer
1 x	Timón lateral
1 x	VBar NEO VLink 6.x Express, neon-yellow
1 x	Palas de autogiro de 330 mm
1 x	Motor OS 3820-1200 eléctrico
1 x	Rafale C (Aero-naut)
1 x	F9F Panther Cabina (Aero-naut)
1 x	Avanti XS 1.8m Jet Blanco/Azul con tren aterrizaje(SebArt)
1 x	Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
1 x	Avanti XS 1.8m Jet FREECE TRICOLORI (SebArt)
1 x	Skyray (RBC Kits)
1 x	Mig-29 "FULCRUM" (RBC Kits)
1 x	Me-163
1 x	de Havilland Vampire (Rc Factory)
1 x	Avanti XS 1.8m Jet FREECE TRICOLORI con tren aterrizaje (SebArt)
1 x	Avanti XS 1.8m Jet Blanco/Azul (SebArt)
1 x	Motor MVVS 5.6/690 GLIDER
1 x	Hélice 2 palas 29mm (hélice derecha)
1 x	Adaptador de hélice 3.2 mm M6
1 x	Defensas de 25 mm (10 pcs)
1 x	Eje barco 290 mm 4/4 mm
1 x	Hélice tripala 10x7
1 x	Hélice Plegable CAM PROP 10x6 + Cono completo
1 x	Hélice plegable CAM-Prop 8x6
1 x	Motor UMS Radial-5-125cc gas
1 x	Motor UMS Radial-5-150cc gas
1 x	Tuerca para asegurar tornillos M2
1 x	Cargador POLARON EX 800 W
1 x	Motor UMS Radial-7-50cc gas
1 x	Motor UMS Radial-7-35cc glow

54,811.01EUR