130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Optical RPM Sensor
2 x Vasa model Catapult
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 
2 x Servo NARO Max Std
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
2 x BALSA triangular 6x6x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x EasyFLY Addon
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Interface Jack Adapter IKARUS
1 x Interface Realflight Simulator
1 x Double conector with JR adapter and 200 mm extension
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Tube Pitot to PIXHAWK
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x Brass control horn M2 large for wire (2pcs)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Spinner INO 70 mm Chrome (Imitacion metal)
1 x 82 mm INO spinner (carbon imitation)
1 x Wheel cover holder Ø 6 mm (2 uds)
1 x Tap FESTO 4-4 mm
1 x Quick hose connector 4-4 mm
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x Wheel cover holder Ø 5 mm (2 uds)
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x Landing gear axle Ø 5 mm (2 uds)
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Spinner NUT M10x1
1 x Y-Hose connector 6-6-6 mm
1 x T-Hose connector 6-6-6 mm
1 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x Bearing block for noseleg landing gear
1 x White aluminium 230 mm landing gear
1 x Quick hose connector 3-3 mm
1 x Servo arm with 5 mm hole to FEMA 9810A
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x Indoor landing gear set
1 x 57 mm INO spinner (carbon imitation)
1 x Spinner INOVA 45 mm White
1 x Spinner INOVA 63 mm White
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Fiberglass landing gear for 140-160
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x 75 mm INO spinner (carbon imitation)
1 x 51 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x 45 mm white plastic spinner for fixed propeller
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Kit hydraulic brake
1 x 42 mm white plastic spinner for fixed propeller
1 x ESC ALPHA 60A HV
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Spray Graphit 33
1 x Presto SF Light Filler styrene-free (420 g)
1 x Bungee HLG Premium
1 x Balsa panel 2.0x100x1000 mm
1 x Hovercraft sailcloth
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x AXI 2814/16 V2 Long
1 x KONDOR 15-92
1 x AXI 2820/12 V2
1 x AXI 2820/10 V2
1 x AXI 2820/14 V2
1 x KIRA 500-30 6,7:1
1 x AXI 2814/10 V2
1 x KIRA 400-27
1 x PYRO 800-48 Long Axi
1 x Motor Mega AC 16/10/03 RACE
1 x AXI 2826/8 V2 Long
1 x AXI 2217/16 V2 Long
1 x AXI 2826/10 V2 Long
1 x KIRA 480-34 5,2:1
1 x AXI 2826/12 V2 Long
1 x PYRO 650-103 Long Axi
1 x AXI 2814/20 V2 Long
1 x Release wax 250ml
9,945.15EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies