Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Stickers-digit for marking
2 x	PIX Hawk with accesories
1 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
3 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
2 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Z type of cable coupler Ø 2 (2 uds)
2 x	Pine wood slat 10x10x1000 mm
2 x	Couple M4 for wire (10 pcs)
1 x	BALSA leading edge 8x10x1000 mm
1 x	Threaded coupler M3 (10 uds)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Spannlack 1000 ml
1 x	Jeti Box mini
2 x	DYNAMOMETER S-1580
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Allen wheel collar M3x5
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 5,0 mm M8
1 x	3 mm Short Prop Adapter M5
1 x	Allen wheel collar M4x6
1 x	3,2 mm Prop Adapter M5
1 x	Adapter 4,0 mm M6
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 4,0 mm M8
1 x	6 mm Prop Adapter M8
1 x	4 mm Prop Adapter M6
1 x	5 mm Prop Adapter M8
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Turnbuckle M2,5x32/48 (2pcs)
1 x	Threaded coupler M2 (10 pcs)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Turnbuckle M2x22/35 (2pcs)
1 x	BALSA triangular 10x10x1000 mm
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Turnbuckle M1,6x17/27 (2pcs)
2 x	White large kwik link (10 pcs)
1 x	Birch plywood plate 600x300x1.2 mm
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	5 mm Prop Adapter M6
1 x	Tube Pitot to PIXHAWK
1 x	Oracover ROYAL RED 2m
1 x	Towing hook
1 x	Towing hook <3m
1 x	Tow hook for tug
1 x	Pulley brass 14/2 (2 pcs)
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	MZ-10, 5 Channel HoTT
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Propeller Pleg CAM-Prop 8x6
1 x	MZ-18, 9 Channel HoTT
1 x	Propeller hub spacer 8/5.5
1 x	PPM Encoder Module
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Oracover Yellow CUB 10 m
1 x	LOWER TOW HOOK
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	Black large kwik link (10 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Micro clevis (10 uds)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Receiver replacement antenna, approx. 15
1 x	Quick hose connector 6-4 mm
1 x	Adjustable brass horn threaded M3
1 x	Distanzstück motor OS 120 AX
1 x	40,0 mm hydro-propeller (left hydropropeller)

3,376.29EUR