Top » Catalog » Hardware » Batteries » LiPo Batteries » Gens Ace » GENS50005S60C

105.00EUR

Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
[GENS50005S60C]

1. Batería muy recomendable gracias a su baja resistencia interna/capacidad/voltaje y con una larga vida útil.
2. Conector de equilibrado JST/XH standard.
3. Fácilmente monitorizable.
4. Proporciona la máxima velocidad y largo tiempo de uso.
5. Capacidad de carga rápida (de hasta 5C).

Especificaciones:
- Tipo de producto:Pack de batería LiPo
- Capacidad: 5000 mAh
- Voltaje: 18,5V
- Máxima descarga continua: 60C (300A)
- Soporta picos de hasta: 120C (600 A)
- Peso: 620 g
- Dimensiones: 161x45x37 mm
- Conector de equilibrado: JST-XH
- Conector de descarga: -
- Carga: 1-3 C Recomendada, 5C Máx.

- Weight: 808 g
- Dimensions: 161x46x51 mm
- Balance Plug: JST-XH
- Discharge Plug: N/A
- Charge Rate: 1-3 C Recommended, 5C Max

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Mobile Terminal
1 x	Steering arm 16 mm Ø 4 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Round Rod 6,0x1000 mm
1 x	Support ECU Xicoy X-45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Secraft Fuel system v2, red color
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Threaded coupler M3 (10 uds)
1 x	Xplorer3 anemometro
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Horn 6/20 with M3 Bearing
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Xplorer2 anemometro
1 x	ABS I Strip 20x10x1000 mm
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Interface Realflight Simulator
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Extractor piñones 2.3/3.2 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Round Rod 3,0x1000 mm
1 x	Vasa model Catapult
1 x	Rudder 2_Tray 3~3.5 inch
1 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Horn 5/20 with M2 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Glases Nimbus
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Motor mount M
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	6 mm aluminium horn with patella
1 x	Glases Aspen
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Servo Mount M (blue)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Round Rod 1,5x1000 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Angle of incidence meter
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Rudder 2_Tray 4~4.5 inch
1 x	"S" set for boats
1 x	Cable Cargador FUTABA
1 x	Yellow smoke canister 65 g
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	CC 05
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	TWIST planeador gomas
1 x
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	4 LiPo XH>EH adapter
1 x	White smoke canister 65 g
1 x	Green smoke canister 140 g
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Blind nut M4 (10 pcs)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Cable set Premium™ MAXI "one4two"
1 x	Blind nut M3 (4 pcs)
1 x	Propeller Pleg CAM Carbon 16x10
1 x	Propeller Pleg CAM Carbon 12.5x7.5
1 x	Propeller Pleg CAM Carbon 10x7 Reverse Rotation
1 x	Propeller Pleg CAM Carbon 11x10
1 x	Propeller Pleg CAM Carbon 13x11
1 x	Propeller Pleg CAM Carbon 15x10
1 x	Propeller Pleg CAM Carbon 13x5
1 x	Propeller Pleg CAM Carbon 14x12
1 x	Propeller Pleg CAM Carbon 14x6
1 x	Propeller Pleg CAM Carbon 11x8
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Propeller Pleg CAM Carbon 12.5x6
1 x	Propeller Pleg CAM Carbon 14x7
1 x	Propeller Pleg CAM Carbon 12x5
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x	PT 22x10 EL Propeller
1 x	Locking cable tie 4.6x203 (uds)

2,222.45EUR