Top » Catalog » Hardware » Chargers » Chargers » Multiplex » MPX308129

380.00EUR

POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
[MPX308129]


Charger wiut 2 outputs 200 Watt and up to 20 A load current. Perfect for charging LiPo batteries and smartphones and digital cameras bateries. Its two outputs are independent and can be configured independently. Is charging process of each output can be displayed independently on backlight screens. Menus can be can be configured in several languages: German, English or French. Its load power allows you to charge up the batteries of greater capacity, even those with a higher capacity to 5 A.

Features
• BID system (Battery Identification
• Charging port USB 5V / 1A for smatphones and digital cameras • Measurement of internal resistance
• Displaying the internal temperature of the device
• 2 x 20 internal battery memories
• Overheating protection
• Overload protection
• Short circuit protection
• 400W charge-discharge
• Two completely separate outputs

Specifications
Input voltage: 10.5 to 18 V or 230 V
Load power: 400 W (2 x 200 W)
Count LiIo / LiPo / LiFe cells: 1-7 cells
Number of NiCd / NiMH: 1-18 cells
Count PB / lead cells: 1-12 cells
Charging current: 2x 0.1 to 20 A
Download: 2x 0.1-10 A
Balanced: 300 mA
Charging ports: 2
Dimensions: 270x200x85 mm
Weight approx: 2600 g


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
SAITO FG-120 TSS Boxer 4T
SAITO FG-120 TSS Boxer 4T
1,800.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Mobile Terminal
1 x Steering arm 16 mm Ø 4 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Couple M4 for wire (10 pcs)
1 x Round Rod 6,0x1000 mm
1 x Support ECU Xicoy X-45
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Secraft Fuel system v2, red color
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Threaded coupler M3 (10 uds)
1 x Xplorer3 anemometro
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Horn 6/20 with M3 Bearing
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Blue aluminium servo arm V1-Hitec 1,25" inch M3
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Strip ABS 2.0x10.0x1000 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Horn 6/27 with M3 Bearing
1 x Horn 13,5x16 mm (2 pcs)
1 x Xplorer2 anemometro
1 x ABS I Strip 20x10x1000 mm
1 x Rudder 2_Tray 3.5~4 inch
1 x Interface Realflight Simulator
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Locking cable tie 2.5x100 (uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Extractor piñones 2.3/3.2 mm
1 x 6 mm red aluminium threaded horn with patella
1 x Horn 20x28,5 mm (2 pcs)
1 x Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Round Rod 3,0x1000 mm
1 x Vasa model Catapult
1 x Rudder 2_Tray 3~3.5 inch
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Screw-lock connector M2 (2 uds)
1 x Horn 5/20 with M2 Bearing
1 x Brass control horn M4 short for wire (10pcs)
1 x Glases Nimbus
1 x Aluminium cap bolt washer M4 green (8 pcs)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Soporte grifo FESTO (2 pcs)
1 x Motor mount M
1 x ABS Strip 1.5x6.0x1000 mm
1 x 6 mm aluminium horn with patella
1 x Glases Aspen
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Servo Mount M (blue)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Round Rod 1,5x1000 mm
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Angle of incidence meter
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Rudder 2_Tray 4~4.5 inch
1 x "S" set for boats
1 x Cable Cargador FUTABA
1 x Yellow smoke canister 65 g
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x CC 05
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x TWIST planeador gomas
1 x 
1 x Spare Part Frame Set for EACHINE RACER 250
1 x ABS tube 9.0x7.0x1000 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Profile ABS Square 4 x 1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x 4 LiPo XH>EH adapter
1 x White smoke canister 65 g
1 x Green smoke canister 140 g
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x L-Connector 1.5 mm x 1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Blind nut M4 (10 pcs)
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Cable set Premium™ MAXI "one4two"
1 x Blind nut M3 (4 pcs)
1 x Propeller Pleg CAM Carbon 16x10
1 x Propeller Pleg CAM Carbon 12.5x7.5
1 x Propeller Pleg CAM Carbon 10x7 Reverse Rotation
1 x Propeller Pleg CAM Carbon 11x10
1 x Propeller Pleg CAM Carbon 13x11
1 x Propeller Pleg CAM Carbon 15x10
1 x Propeller Pleg CAM Carbon 13x5
1 x Propeller Pleg CAM Carbon 14x12
1 x Propeller Pleg CAM Carbon 14x6
1 x Propeller Pleg CAM Carbon 11x8
1 x Propeller Pleg CAM Carbon 12x6.5
1 x Propeller Pleg CAM Carbon 12.5x6
1 x Propeller Pleg CAM Carbon 14x7
1 x Propeller Pleg CAM Carbon 12x5
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x PT 22x10 EL Propeller
1 x Locking cable tie 4.6x203 (uds)
2,222.45EUR
Manufacturers
Manufacturer Info
MULTIPLEX
- MULTIPLEX Homepage
- Other products
Notifications
NotificationsNotify me of updates to POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce