Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock	Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock
Opto Gas Engine Kill Switch temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	Turbine MAMMOTH 25.4 Kg temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	6 mm Quick clamp_S (10 pcs)
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Blue silicone 0,5 qmm wire (50 m)
2 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Cable Cargador FUTABA
1 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	10 mm Quick clamp_L (6 pcs)
3 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	2 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	JETImodel SINGLE BEC
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Short ball link M3 (6 uds)
1 x	Indoor hinge with servo arm integraded
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Support pump Xicoy X45
1 x	Support Filtro FESTO
1 x	Recessed MPX connector support (6 pcs)
2 x	Straightened threaded rod M3 - 1m
1 x	MAX BEC
1 x	Opto Gas Engine Kill Switch
1 x	Opto Gas Engine Kill Switch
1 x	SPS Remote switch actuator
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	FX three-position switched channel, long
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
2 x	Extension 5 lipos JST - JST/C
1 x	Multi-adapter balancer JST/C - TP
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	EWC3 100 cm wing connector
1 x	Female connector for 12 pines AWG
2 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	SPARK Switch 12v
1 x	MPS Gas-Cap-Powerswitch
2 x	EWC3 40 cm wing connector
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Yellow smoke canister 140 g
1 x	Yellow smoke canister 65 g
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	Slave-cable USB Easy Sim
1 x	Ferrita 17x10x6.5 mm
1 x	BEC 3A FOXY
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Male connector for 6 pines AWG
1 x	Female connector for 10 pines AWG
1 x	Circlick securite
1 x	Landing gear strap small (4 uds)
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Adapter 3,2 mm M8
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	CM-3
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Battery charging cable XT60
1 x	Male Prolonger TP 4/5S
1 x	CC 03
1 x	Male connector for 16 pines AWG
1 x	Female connector for 16 pines AWG
1 x	Male connector for 10 pines AWG
1 x	Connector CAN 15
1 x	Magnetic Interruptor MULTIPLEX
1 x	Male connector for 20 pines AWG
1 x	Male connector for 12 pines AWG
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Interruptor SPS 70v 60/120A
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Interruptor RX/Batterie

2,510.68EUR