Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Connectors MPX 8 pins (green) 1 pair (male-female) temporarily out of stock	Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return temporarily out of stock	Epoxy L 40 min. 10 kg (Resin) temporarily out of stock
Silicone red 4,0 qmm wire (25 m) temporarily out of stock	XT-90 connector (pair) temporarily out of stock	T- Fittings blue color (2pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	FOX ARF 2000 mm Red (Hacker Model)
2 x	VAGABOND 1500 mm ARF V2 (Red)
2 x	Mini VISION "spread tow" CFK
2 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	Glider Ka 7 Red (2540mm)
2 x	VAGABOND 1500 mm ARF V2 (Blue)
2 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	TAKEO 3.6m electric
1 x	E-FUN BUG (ROI-Import)
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Wings Bags JEEMO
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	Propeller set 400 (2R+2L)
2 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
3 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
2 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
2 x	Cockpit plastic closing
1 x	Small aluminium horn blue (2pcs)
2 x	Horn with ball 40x30
3 x	Small aluminium horn red (2pcs)
2 x	Brass control horn M4 short for wire (10pcs)
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Tape GFK 25 mm
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 300 mm (2 pcs)
2 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Tape GFK 50 mm
1 x	SE Ring 450 mm (2 pcs)
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Angled clevis with threaded rod M3
2 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Threaded coupler M3 (10 uds)
1 x	Marker ties (20 pcs)
1 x
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Threaded coupler M2 (10 uds)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Straightened threaded rod M2-1m
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
2 x	SE Ring 240 mm (2 pcs)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	20x200 mm battery rings
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
2 x	Canopy Latch
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Covered closure or fairings
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	Screw-lock connector M2 (2 uds)
2 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Cap closure 33/23.5mm (2 uds)
1 x	IKURA 4.0 m
1 x	ORCA C64 Pro V 3.6m
2 x	Propeller POWER-PROP 7x7
1 x	Landing gear Rocket 400
1 x	DELPHIN Race 3.6m c64
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	BULLIT Wing 1095 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Cable control set
1 x	NF-3m Heli Kit
1 x	Jet Afterburner Simulator NF-Jet4 RY
1 x	NF-3X-80 liner Kit
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	5 mm M2 variable inclined horn
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm M3 variable inclined horn
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Brass control horn M2 long for wire (10pcs)
1 x	6 mm aluminium horn with patella
1 x	5 mm M2 variable horn
1 x	Horn 5/10 with M2 Bearing
1 x	Rudder forward 90x28 "type Kato"
1 x	Rudder forward 80x28 "type Kato"
1 x	Turnbuckle M2x29/43 (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	100 mm rods + T patellas set for direction control
1 x	250 mm / 16 mm Airbrakes
1 x	100 mm rods set for direction control
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Pushrod greyline 3/2 with coupler M2
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Clip fixing for wing (2 pcs)
1 x	One touch canopy lock
1 x	Actuador lineal HLS12-100210-7.4v
1 x	LUNAK 4,00 m
1 x	NF-3 RC set
2 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	NF-3X-350 set
1 x	NF-2 RC set
1 x	Cable with accesories
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	Horn 5/15 with M2 Bearing
1 x	Small adjustable control horn with bearing
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Long adjustable control horn 3x34
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Foil for sticking flaps and ailerons
1 x	Black large kwik link (10 pcs)
1 x	Rubber bushing with bracket "A" type (2 pcs)

17,712.28EUR