Top » Catalog » Hardware » Propelers » Props » Electrics » Propeller GWS » GWSEP8043

1.50EUR

Propeller 8x4,3 SlowFlyer
[GWSEP8043]


Propeller GWS 8x4,3


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Crystal TX 35.180 Ch 78
Crystal TX 35.180 Ch 78

temporarily out of stock
temporarily out of stock

Indoor hinge with servo arm integraded
Indoor hinge with servo arm integraded

temporarily out of stock
temporarily out of stock

1,6x1000 mm 2:1 black termoretract tube
1,6x1000 mm 2:1 black termoretract tube

temporarily out of stock
temporarily out of stock

Micro flex hinge (12 uds)
Micro flex hinge (12 uds)

temporarily out of stock
temporarily out of stock

Tape GFK 25 mm
Tape GFK 25 mm

temporarily out of stock
temporarily out of stock

Propeller APC 12x3.8 SF
Propeller APC 12x3.8 SF

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
    Folding Props->
    Props->
      Electrics->
        Falcon propellers
        FIALA Propellers
        Graupner Propellers
        Mejzlik Propellers
        Propeller Aero-naut
        Propeller APC
        Propeller GWS
        PT Props
        WES-Technik propellers
        XOAR Propeller
      Explosion->
      Multicopters->
    VPP/EVP
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
DUPLEX case for Jeti DS handheld transmitter
DUPLEX case for Jeti DS handheld transmitter
54.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Jeti Black cap
1 x WingFix ULTRA Black Edition
1 x Truck-trailer for gliders 720 x 239 mm
1 x Propeller balancer
1 x Medidor ángulos y/o incidencias
1 x Surface Indicator Gauge Small
1 x Angle measurer
1 x Beech dowels 3.0 x 1000 mm
1 x BALSA leading edge 8x10x1000 mm
2 x Ferrita 14x8x5.5 mm
2 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x Ferrita 27x14x7 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Cap Hispano Aviación
2 x Softshell Hispano Aviación
1 x Lock washer 2.7 mm (20 pcs)
1 x Quicklock washer 1 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x M3 black washers (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium cap bolt washer M4 green (8 pcs)
2 x Spring lock washer 2.6 mm (20 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Quicklock washer 3.5 mm (10 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x Flat washer 3.2 mm (20 pcs)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x Nylon hinge for flaps 33x9 (2 pcs)
2 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Round Rod 1,0x1000 mm
1 x 25 mm Sandpaper file
1 x Horn for flap control (1 pcs)
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Aluminium sheet 500x250x0,5mm
1 x DC Small for MultiLog & UltraLight
1 x ESC Actro-Marine 30A
1 x Tirpiz Battleship 1:200
1 x SCHARNHORST accessories
1 x A/C quality beech plywood 600x300x6.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x Tapping Screw M2.2x9.5 (10 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
2 x Pine wood slat 2.0x2.0x1000 mm
2 x BALSA trip 2.0x10.0x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Ferrita 17x10x6.5 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Small pinned hinge (12 uds)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Threaded coupler M2 (10 pcs)
1 x Threaded coupler M2,5 (10 pcs)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x 2 mm Prop Adapter M5
1 x Shirt Hispano Aviación
1 x Nut for mounting M2,5 (4 pcs)
1 x Screw M2.5x5 (10 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 black pcs)
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Blind nut M4 (10 pcs)
1 x Threaded insert M6 (10 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Filler Gauges
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Clamp K30 G3
1,721.09EUR
Manufacturers
Manufacturer Info
GWS
- Other products
Notifications
NotificationsNotify me of updates to Propeller 8x4,3 SlowFlyer
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce