1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
3 x Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x Camara USB micro endoscopica
2 x Cable acero trenzado Ø 1,3 mm (10 m)
2 x Anclaje cabina en L "tipo F3A" (2 pcs)
1 x Anclaje cabina de soporte horizontal "tipo F3A" (2 pcs)
1 x Brazo direccional 12 mm Ø 4 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Cierre cabina V1 M3 Rojo (2 pcs)
1 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Cable silicona 0,25 mm2 blanco (100 m)
1 x Varilla acero Ø 1,2 mm x 1500 mm
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Piloto 1/10 "Jimmy"
1 x Piloto 1/4 "Heidi"
1 x Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x CC 02
2 x Pasta para estaño 20 g
1 x Disolvente Plasti Dip 1000 ml
1 x Prolongador S-Bus 1-2 silicona 120 cm
1 x Conector banana oro 3,5 mm
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x Conjunto bieleta 80 mm para dirección
1 x Cable acero trenzado Ø 0,5 mm (2 m)
1 x Pin largo M2 (10 uds)
1 x Cierre para cabinas aluminio 4.7g
1 x Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x Brazo direccional 12 mm Ø 3 mm ( 2 uds)
1 x Clips para fijar Ala (2 pcs)
1 x Abrazadera 4.6x203 (20 uds)
1 x Cierre/Anclaje Ala M6 Rojo (2 pcs)
1 x Cable acero trenzado Ø 0,5 mm (20 m)
1 x Conjunto bieleta 100 mm para dirección
1 x Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x Cierre cabina tipo FOX MDM1 4m (1 par)
1 x Pasador M1,2x10 (10 pcs)
1 x Prisionero 3 mm Ø (4 uds)
1 x Prisionero allen M3x3
1 x Salida para cables 28x5 mm (2 pcs)
1 x Prisionero 6 mm Ø (4 uds)
1 x Disolvente barniz tensor 500 ml
2 x Protector punta ala 38x10x12 (2 pcs)
1 x Transmision funda/varilla greyline plastica 3/2 kwik link M2 100
1 x Prisionero aluminio 6 mm Ø (4 uds)
1 x Prisionero aluminio 5 mm Ø (4 uds)
1 x Transmision funda/varilla octog. plastica 4/3 porta kwik link M3
2 x Soporte abrazaderas 4.3 (4 uds)
1 x Batería Sanyo Eneloop AA 1,2 V 2400 mAh
1 x PowerBox PowerExpander SRS
1 x Batería Panasonic Eneloop AA 1,2 V 1900 mAh
1 x Cable USB CORTEX DEMON Bavarian
1 x Batería Sanyo Eneloop RX 6,0 V JR
1 x GPS Logger Dymond
1 x Adaptador BlueCom™ (iOS)
1 x Caja para guardar baterías LiPo "BIG"
1 x Batería Sanyo Eneloop AAA 1,2 V 800 mAh
1 x DPSI RV Mini 5 Magic
1 x Iman EMCOTEC
1 x Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x Cierre para cabinas aluminio 5.4g
1 x Varilla mando doble roscada aluminio M2,5 30 mm (2 pcs)
1 x Prisionero aluminio 2 mm Ø (4 uds)
1 x Transmision funda/varilla greyline plastica 4/3 porta kwik link
1 x Hélice RABOESCH M4 30 mm (3 Palas) (Hélice derecha)
1 x Conector ABS "L" 1.5 mm x 1000 mm
1 x Hélice RABOESCH M4 45 mm (3 Palas pr) (Hélice derecha)
1 x Acoplador laton Ø 3 mm L: 20 mm
1 x Bateria Lipo GENS 450 mAh 2s 7.4v 20c Soaring
1 x Batería LiPo GENS 2600 mAh 2S 7.4v Pack Emisora (Gens Ace)
1 x Batería LiPo GENS 4800 mAh 5S 18,5V 18C (Gens Ace)
1 x Soporte bateria LiPo V2 S (negro)
1 x Batería LiPo GENS 450 mAh 3S 11,1V 25C (Gens Ace)
1 x Batería LiPo GENS 5300 mAh 2S 7,4V 30C (Gens Ace)
1 x Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
1 x Batería Sanyo Eneloop RX 4,8 V JR
1 x Cono NUT M4
1 x Cono NUT 1/4x28
1 x Cono Aluminio hélice fija 30 mm diámetro / eje 3,2 mm
1 x Cono NUT M5
1 x Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
1 x Cono NUT M6
1 x Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x Pasacable de goma Ø 4 mm (4 uds)
1 x Pasador 1.6x16 mm (10 uds)
1 x Pasacable de goma Ø 6.4 mm (4 uds)
1 x Sistema salvaservos rueda delantera BIDULE 111
1 x Prisionero 3.5 mm Ø (4 uds)
1 x Receptor MINIMA 6S HITEC
1 x Hélice RABOESCH M3 50 mm (3 Palas pr) (Hélice izquierda)
1 x Eje barco 290 mm M5
1 x Eje barco Ø6mm de 450mm M5
1 x Acoplador laton Ø 5.0 / 4.0 mm L: 25 mm
1 x Hélice RABOESCH M4 40 mm (3 Palas) (Hélice derecha)
1 x Cardan nylon negro (sin piñones)
1 x Canal de ABS de 5,0x10,0x1000 mm
1 x Eje Timon para construir
1 x Canal de ABS de 1,0x2,0x1000 mm
1 x Acoplador laton Ø 2 mm L: 15 mm
1 x Eje barco de 290 mm M4 7/8x212 mm
1 x Acoplador laton Ø 3.0 / 2.3 mm L: 20 mm
1 x Batería LiPo GENS 3300 mAh 3S 11,1v 25C (Gens Ace)
1 x Batería LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x Batería LiPo GENS 5000 mAh 12S 44,4v 45C (Gens Ace)
1 x Batería LiPo GENS 2200 mAh 4S 14,8v 25C (Gens Ace)
1 x Batería LiPo GENS 2700 mAh 3S 11.1v Pack Emisora (Gens Ace)
1 x DPSI RV Mini 6 Magic
1 x Interruptor actuador SPS gas verde
1 x Tornillo Servos M2x9/16 (4 pcs)
1 x Avanti XS Jet, Tubo salida para JetCat P-60/P-100 (SebArt
1 x CESSNA 50E White/Red
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x DPSI Ampere & Voltage bundle
1 x Condensador terminal JR
4,334.73EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas