1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cap Hispano Aviación
2 x Flat washer 3.2 mm (20 pcs)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Flat washer 1.7 mm (20 pcs)
1 x Windsock Ozone L -1200 mm
1 x Set cintas unión paracaídas 145 cm
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Lock washer 2.7 mm (20 pcs)
1 x M3 black washers (4 pcs)
2 x M3-M4 rubber washer (8 pcs)
1 x Rescue 1,8m2 / BackPack
1 x Aluminium wide washer M3 red (4 pcs)
1 x LASER 73" 1.85m (05) PILOT
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Profile ABS Square 2 x 1000 mm
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Carbon fiber rod 20 mmx1000 mm
1 x Softshell Hispano Aviación
2 x DPSI RV Mini 5 (2008)
2 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x bavarianDEMON USB cable
1 x Emcotec SPS Magnetic Switch Actuator
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
2 x Socket Head Screw M2x5
1 x Servo M2x9/16 screw (4 pcs)
1 x Screw M4x20 (10 pcs)
1 x Spring pin Ø 1 x 6 mm (10 pcs)
1 x Servo M2x5/16 screw (4 pcs)
1 x Tapping Screw M2.2x65 (10 pcs)
2 x Socket Head Screw M2x10
1 x Tapping Screw M2.2x13 (10 pcs)
1 x Threaded insert M5 (10 pcs)
1 x Parachute PV6 for F3J
1 x Para-RC Trike "RC-Bullix"
1 x 1/12 Pilot "Fighter"
1 x Screw M2.5x10 (10 pcs)
1 x Pan head screw M2x16 PH
1 x 160 mm carbon undercarriage (2pcs)
1 x 100x50 mm SLH KOVO wheel
1 x 1/6 Pilot "Buddy"
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x 1/12 Pilot "Langley"
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Angled clevis with threaded rod M3
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Premium servo extension 50cm
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 10 cm (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x 110x55 mm C SLH KOVO wheel
1 x Parachute P4
1 x 120x60 mm SLH KOVO wheel
1 x Screw M2.5x5 (10 pcs)
1 x 25 mm carbon servo arm
1 x 1/10 Pilot "Jack"
1 x 1/10 Pilot "Jimmy"
1 x 1/12 Pilot "Cougar"
1 x "Taxi Tank" Fuel Tank
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Screw M3x5 (10 pcs)
1 x 10 mm floating pad (72 pcs)
1 x Socket Screw M3x9 mm
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x Trike XL motor set (motor+esc+prop)
1 x Screw M2.5x20 (10 pcs)
1 x Screw M3x16 (10 pcs)
1 x 
2 x Spinner NUT M5
2 x Spinner NUT M6
1 x Spinner NUT 1/4x28
1 x PowerBox DigiSwitch V2 MPX/JR
1 x Vest clothes Hispano Aviación
1 x Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x Spinner NUT M8x1,25
1 x Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x Spinner NUT M5
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Spinner Alumin. fixed propeller 30 mm / 3,2 mm
2 x Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x Futaba Female 40 cm extension
1 x DPSI OCP Overload protection
1 x Antonov AN2 Scale 1/6 - 3m
1 x DPS Switch JR/JR
2 x DPSI V-Match
1 x Switch magnet for gas cap and magnet switch actuators
1 x DPSI Ampere & Voltage bundle
1 x SkyMaxx 1.550 mm (kit)
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x DPSI magnetic switch actuator (PCB)
1 x 100 Newtons FEMA absorber
1 x Optotronix X-Carrier
1 x DPSI RV Mini 6 (2008)
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x 300 Newtons FEMA absorber
1 x DPSI RV Mini 6 Magic
1 x Adapter 4,0 mm M8
2 x Hexagonal Nut M1 (10 pcs)
1 x wire tensioner (silver)
1 x Ball link M3 (10 pcs, flat ball)
1 x Long ball link M3 (6 uds)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Micro Crystal RX 35.090 Ch 69
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x LA500 pilot-seat set
1 x Lock nut M4 (10 pcs)
1 x 2,3 mm Prop Drive Günther M4
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Adapter 3,2 mm M8
1 x Blind nut M6 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x Blind nut M2 (10 pcs)
1 x Blind nut M5 (10 pcs)
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x Hexagonal Nut M4 (10 pcs)
1 x Blind nut M8 (10 pcs)
1 x Threaded insert M3 (4 pcs)
1 x Hexagonal Nut M1,6 (10 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Adapter 4,0 mm M6
1 x 3 mm Long Prop Adapter M5
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Fod Guard 94x34 mm
1 x Cockpit aluminium closing
1 x Spinner plastic 63 mm Red 2Bl
1 x Charger ISDT 608AC 200W
1 x Cockpit plastic closing
1 x Escape Moki 100 BVT
1 x wire tensioner (red)
1 x wire tensioner (blue)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Cable coupler M3 (10 uds)
1 x Cable coupler M2 (10 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Crystal RX 35.030 Ch 63
1 x Short ball link M1.6 (6 uds)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x Crystal RX 35.250 Ch 285
1 x Micro Crystal RX 35.140 Ch 74
1 x Micro Crystal RX 35.170 Ch 77
1 x Long ball link M1.6 (6 uds)
1 x Crystal RX 35.010 Ch 61
1 x M3 INDUSTRIAL ball link (2 uds)
1 x Long ball link M2 (6 uds)
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Socket head long ball link M3 (6 uds)
1 x Socket head ball link M3 (2 uds)
1 x Crystal RX 35.160 Ch 76
1 x Micro Crystal RX 35.070 Ch 67
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Ball link M3 (6 uds)
1 x Ball link M3 (10 pcs)
1 x Ball link M3 RPA's-UAV's
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x Ball link M2,5 (10 pcs)
1 x Micro Crystal RX 35.160 Ch 76
1 x Adapter 3,0 mm M6
1 x Baseplate servo
1 x Ball Link Plier
1 x Lock nut aluminium M3 (4 pcs)
2 x Spinner NUT M10x1
1 x Spinner 60 mm GFK
1 x 75 mm spinner (Carbon Imitation)
1 x Spinner 60 mm White (Kavan)
1 x Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
6,716.89EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies