1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
2 x Glider PIROL
3 x X-RAY Micro QR (Elevator)
1 x DINO Glider ARC
1 x BABY glider (Aero-naut)
1 x Glider STROLCH
1 x X-RAY Micro QR (Tail Tube)
1 x Glidder Mü13e (Bergfalke)
1 x X-RAY Micro QR (Rudder)
1 x X-RAY Micro QR
2 x Glider IKARUS
2 x Glider KNIRPS
1 x BABY glider drawings (Aero-naut)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x Motor DLE 430 cc - Paramotors
1 x Avia (Top Model)
1 x ACTIVE ARF Electric 1.995 mm
1 x Logo 400 SE VBar
1 x Field folding model stand
1 x Angle of incidence meter
1 x 45 mm rods set for direction control
1 x 140 mm rods + T patellas set for direction control
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Cable grommet 9.5 mm (4 uds)
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x 100 mm rods + T patellas set for direction control
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Surface Indicator Gauge Small
1 x Truck-trailer for gliders 720 x 285 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Cable grommet Ø 4 mm (4 uds)
2 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 4.0x3.0x1000 mm
1 x Cable tie mounts 4.3 (4 uds)
1 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x 45 mm rods + T patellas set for direction control
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
2 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x 90 mm rods + T patellas set for direction control
1 x Canopy Latch
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 80 mm rods set for direction control
1 x ABS tube 5.0x4.0x1000 mm
2 x ABS tube 3.0x1.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x 100 mm rods set for direction control
1 x Clip fixing for wing (2 pcs)
1 x 11 mm Rubber pads (14 pcs)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x 38x4,5 mm wires output (2 pcs)
1 x Clip mini fixing for wing (2 pcs)
1 x MZ-18, 9 Channel HoTT
1 x Ciano KAVAN Thick 20g
1 x Ciano KAVAN Super Thin 20g
2 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Receiver replacement antenna, approx. 85
1 x Quick hose connector 6-4 mm
1 x Mini Infrared Thermomiter
1 x Spikes Band (5 m)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Aluminium sheet 500x250x0,5mm
1 x Glow Plug Clip 1.3 Ah
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x BETA 1400 ARF Red
1 x KAVAN Hand crank fuel pump
1 x Pin hinge 39x20 mm (10 uds)
1 x Propeller electric carbon 8.5x7
1 x Propeller electric carbon 7x7
1 x GP 15 JETA
1 x Propeller electric carbon 8.5x6
1 x DELPHIN Race 3.6m c64
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Propeller electric carbon 9.5x7
1 x Propeller electric carbon 6x5
1 x Foam air filter Ø 48 mm, blue
1 x IMPULSE 2 F3F
1 x LOGO 600 SX (kit)
1 x Servo HITEC D85 MG
1 x Servo HITEC HS-5585MH
1 x Cockpit aluminium closing 4.7g
1 x Servo HITEC D-955 TW Titanium
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Servo HITEC D645 MW
1 x Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Servo SAVOX SV-1261 MG
1 x Servo HITEC HS-311
1 x Piñones SAVOX SH-0350
1 x Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Servo TOPMODEL S7520 MG
1 x 58 mm micro servo cover
1 x Servo TOPMODEL DS1413 T
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x ABS tube 12.0x10.0x1000 mm
1 x Servo TOPMODEL STANDARD S3217
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x USB programador GO servos
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x LA500 tail empennage
1 x Piñon motor rotor LA-500
1 x LA500 front gear holder
17,661.70EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies