1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x PowerBox Smokepump
2 x PowerFuel RX V2 Fuel Pump
1 x Smoke pump RCEXL
1 x Electric Fuel pump
2 x Variable Flow Smoke Pump System
1 x Cap Hispano Aviación
1 x Softshell Hispano Aviación
1 x Shirt Hispano Aviación
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Ballast 700gr OPALE
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Sparkplug 1/4-32
1 x Quick hose connector 3-3 mm
1 x Vest clothes Hispano Aviación
1 x AC-10 pre-rotacion with motor
2 x Extension Arm for Carburetor (red)
1 x Starter 12v (Max 90 and 15ccm)
1 x Hot Glue Stick RED
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Baseplate servo
2 x Telemetry JETI
2 x Turbine RHINO 200 SE 20.4 Kg
1 x SAITO FG-36 carburetor
1 x Z Bender - S Type Tool
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Suction funnel for carburetor 90D-L (red)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x Hose clips 6 mm
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Futaba 2x20 mm servo double arm
1 x XTorque CFK Servohebel 38 HITEC 25T
1 x FUTABA 20 mm servo arm with ball link
1 x Futaba 25 mm servo arm with M3 ball link
1 x Mini Infrared Thermomiter
1 x Foreman, scale 1:32
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Servo GO-09 9g
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Hitec 30 mm servo rounded arm
1 x Servo GO-1013 MG 3.8kg
1 x Futaba 38 mm servo arm
1 x Servo GO-1073MGW 32 kg.cm 0.135s/60º
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Hitec 38 mm servo arm
1 x 46 mm Futaba servo arm tandem with ball link
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Propeller 8x4 Electric
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Propeller APC 11x5.5 Electric
1 x Propeller APC 12x8 SF
1 x MZ-10, 5 Channel HoTT
1 x Cooler motor type 300
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Vertical mounting servo holder
1 x Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x Propeller 8x4,3 SlowFlyer
1 x Propeller 3x2
1 x Reductora IPS dual-motor 10,7:1 with spinner
2 x Cooler motor type 150
1 x Propeller 11x4,7 SlowFlyer
1 x Light System
1 x Fail Safe air retract
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x Cables suitable for the motor AC 28/7
1 x A60 Motor Mount Alu complete set
1 x Propeller APC 13x6.5 Electric
1 x Propeller APC 10x4.7
1 x Propeller APC 10x10 Electric
1 x Propeller APC 13x6.5 Electric Pusher
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 13x8 Electric
1 x Propeller APC 11x5.5 Electric Pusher
1 x Propeller APC 11x7 Electric
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Antenna holder bracket double
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x Reed valve for DA 50-R
1 x SkyMaxx 1.550 mm (kit)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x 76 mm light wheels (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 120x60 mm C SLH KOVO wheel
1 x 90x45 mm hard foam KOVO wheel
1 x 63x12 mm foam special light KOVO wheel with radius (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x 76x24 mm (3.0") Type jets aluminium core wheel
1 x 120x60 mm SLH KOVO wheel
1 x Walnut wood slat 1.5x1.5x1000 mm
9,882.48EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies