1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension silicon 25 cm (Futaba)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 18 mm reinforced hinge
1 x Cap Hispano Aviación
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Large flex hinge (12 uds)
1 x 15 mm reinforced hinge
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Gates hinge
1 x Flap hinge (6 pcs)
2 x Small Crow DLE-170M
1 x Silent-blocks DLE 170M
2 x Propeller FALCON 32,5x11 PUSHER Carbono
2 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Std
2 x Round Rod 5,0x1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x SE Ring 350 mm (2 pcs)
1 x Cable set Premium™ MAXI "one4two"
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Profile ABS Square 1 x 1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
2 x Aro pasacable Ø25 mm (4 pcs)
1 x Suncover 100cc Red
1 x 13 mm wing servo holder
1 x Servo HITEC D625 MW
1 x LA500 housing-upper cyclic
1 x Servo TOPMODEL STANDARD S3217
1 x Horns set HS-65HB/MG, 5065MG
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 1,0x1000 mm
2 x Strip ABS 2.0x10.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
2 x Motor DLE 170 M- Paramotors
1 x Servo Mount M (blue)
1 x 50 mm servo arm with bearing (2 pcs)
1 x Red aluminium servo arm V1-Futaba 17 mm M2
1 x Servo KST A08H V6.0 3,2Kg HV
1 x Hitec 38 mm servo arm with ball link
1 x LA500 nose
1 x Gear set HITEC HS-225
1 x Servo KST X08 Plus 9g HV servo
1 x Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x LA500 rotor head shaft
1 x Servo TOPMODEL S7520 MG
1 x Side rudder
1 x Blade Holder Full (4 blades)
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Futaba 38 mm servo arm
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support Filtro FESTO
1 x Support conector MPX (6 pcs)
1 x Support Pitot JETI
1 x Recessed MPX connector support (6 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Support FUEL DOT V3
1 x Support pumb/filter Xicoy X45
1 x Tapa estado carga XT-60 (6 pcs)
1 x Motor Mega AC 16/25/02
1 x Axi for MVVS 3.5 Sport
1 x Motor A60-6XS V4 28-pole kv370
1 x 2,3 mm Prop Adapter M6
1 x Propeller 12x6 Falcon electric
1 x Landing gear retract neumatic (Jet Legend)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x BlueCom™ Adapter (iOS)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Extension MPX-MPX 20 cm
1 x 30 cm MULTIPLEX female connector
18,921.83EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies