Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Xplorer2 anemometro
1 x	Tow hook for tug
1 x	SERVO HOLDER
1 x	Towing hook
1 x	Horn 6/27 with M3 Bearing
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Cable with accesories
1 x	Horn with ball 40x30
1 x	20 mm carbon horn
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Cable control set
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	RH long aluminium horn (2pcs)
2 x	Horn with ball 55x40
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn 5/10 with M2 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Small aluminium horn gold (2pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Small aluminium horn red (2pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	6 mm aluminium horn with patella
2 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	XH male balance (5S) connector (2 pcs)
1 x	Conector BEC male (10 pcs)
2 x	Conector BEC female (10 pcs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	XH female balance (3S) connector (2 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna gold 5,5 mm (M/F)
2 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	XH male balance (2S) connector (2 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connectors DEANS (T)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Gold antispark 4 mm plug
1 x	Conector Servo female 4 pines
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	MYLAR film A350 (1000x500 mm)
1 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Kit wheel loader 966G II without electrics, without hydrauli
1 x	Rigid coupling brass Ø 5 mm L: 25 mm
1 x	MG cannon 1.8 cm (5 pcs)
1 x	Motor OS 3820-1200 electric
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x	Antenna 50 mm (2 uds)
1 x	Rigid coupling brass Ø 3.0 / 2.3 mm L: 20 mm
1 x	Rigid coupling brass Ø 2 mm L: 15 mm
1 x	Anchor 25 mm (2 uds)
1 x	Barandilla Ms 10x250 mm (2 pcs)
1 x	Stick coupler Ms 15 mm
1 x	Hitec 46 mm servo arm with ball link
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Hitec 38 mm servo arm with ball link
2 x	46 mm Futaba servo arm tandem with ball link
1 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 25 mm servo arm with M3 ball link
2 x	Futaba 2x20 mm servo double arm
1 x	Hitec 20 mm servo arm
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	XTorque CFK Servohebel 38
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 52 mm servo arm
1 x	Futaba 54 mm servo arm with ball link
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Extra long horn 60x30
1 x	Small aluminium horn blue (2pcs)
1 x	Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	MPX housing with flange (4 pcs)
1 x	XH LiPo extension lead
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Servo Connector Brackets (10 pcs)
1 x	2 mm female connector (2 pcs) with safety connector
3 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	XT60 Connector with Holder Male 2pcs
1 x	XH male balance (6S) connector (2 pcs)
2 x	PIN Connector female (100 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	XH female balance (9S) connector (2 pcs)
1 x	Connectors MPX female
1 x	Connectors MPX 8 pins (green) 1 pair (male-female)
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	Propeller APC 14x12 Electric
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	BULL MØ1 2.600mm ORANGE
1 x	BULL MØ1 2.600mm BLUE
1 x	Xoar Electric Beechwood Prop 21x10
1 x	BULL MØ1 2.600mm "ALPINE"
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	FIALA Propeller 19x12 Electric
1 x	Set Legs + Wheels with brake ASPIRE
1 x	Propeller FIALA 15x8 3-Blade
1 x	Tank + hopper Kevlar ASPIRE 6 L Kero
1 x	F-16 Falcon Black Knights 1:6 (1630 mm)
1 x	ASPIRE Blue ARF 2.000 mm
1 x	A50 Motor Mount Alu complete set
1 x	Ancla metal 40 mm (2 uds)
1 x	Motor XPower F2915/12 XLight
1 x	AXI 2808/24 V2 Long
1 x	AXI 2820/14 V2
2 x	Housing Ø 6 mm (20 pcs)
1 x	Railing Ø 2mm (20 pcs)
1 x	Softshell Hispano Aviación
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	54 mm Futaba servo arm tandem with ball link
1 x	M3 black washers (4 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	10 mm dogdrive props
1 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Cancamo Ms 7 mm (50 pcs)
1 x	Motor OS 15 LA
1 x	Frontal support Speed 280
1 x	Motor OS MAX 65 AX (incl. muffler)
1 x	OS 37 SZ-H, Connecting rod
1 x	Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück
1 x	Cannon 53/6 mm
1 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	Bocina Ms 18 mm (3 pcs)
1 x	Cadena 1.0mm x 1 m
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	Motor mount for 1 m models
1 x	Fiberglass motor-holder for electric motors
1 x	Fiberglass motor-holder for electric motors
1 x	Motor OS 46 AX II
1 x	Motor holder AXI
1 x	Fan for A60
1 x	Cabestrante 13 x12 mm (5 pcs)
1 x	Bearings for motor HACKER C50
1 x	Mahagoni 1.0x100x1000 mm
1 x	Motor A50-12 L V4
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	AXI 2814/12 V2
1 x	AXI 2826/10 V2 Long
1 x	Motor MVVS 2.0/1120
1 x	Railing L250 mm (10 pcs)
1 x	Life guard Ø 25,0 mm (2 pcs)
1 x	Motor A20-20 L EVO
1 x	XPower XC5030/14 LS
1 x	Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück
1 x	wooden stairs (kit) 70 mm
1 x	AXI 2212/26 V2
1 x	Coupling for 3 mm axis
1 x	AXI 2826/12 V2
1 x	Motor A50-14 L 8-Polos Electric turbine
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Magnetic Connect locking system
2 x	Conector JAPAN G2 Set 5 pares
2 x	Conector JR Servo female (50 pcs)
1 x	Kontronik connector (10 connectors, 5 pairs)
1 x	MPX screwable clips (4 pcs)
1 x	Conector JR Servo male (50 pcs)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	FIALA Propeller 28x8
1 x	MPX screwable clips (5 pcs)
1 x	Conector JR Servo male (10 pcs)

31,213.96EUR