2 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Exhaust pipe BX 155 Left |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | SE Ring 200 mm (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Piloto JET 1:3,5 |
1 x | Canopy Latch |
1 x | Oracover Azul Cielo 2 m |
1 x | Support pump Xicoy X45 |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Support FUEL DOT V3 |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Xplorer2 anemometro |
1 x | 1/6 Pilot "John" |
1 x | Pilot "Anthony" (Slimline) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | 1/6 Pilot "Tony" |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | 250 mm / 16 mm Airbrakes |
1 x | Cable coupler M2 (10 uds) |
2 x | Tape GFK 50 mm |
1 x | Allen wheel collar M4x4 |
1 x | Universal Colour Paste deep black 250 g |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Cable coupler M3 (10 uds) |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Xplorer1 anemometro |
1 x | SE Ring 300 mm (2 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Oracover Black 10 m |
1 x | ABS angle 4,0x4,0x1000 mm |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Plasti Dip Liquid Tape 429 ml orange |
2 x | 1/12 Pilot "Cougar" |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | 1/6 Pilot "Garry" |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Ferrita 17x10x6.5 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Suncover 100cc Red |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Ferrita 14x8x5.5 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Cable Cargador FUTABA |
1 x | DLE Ignition 170M |
1 x | ZENOAH ZG 62 SL |
1 x | Long pinned hinge (12 uds) |
1 x | Captador RCEXL para DA |
1 x | Pick up EME 55/60 cc |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | DLE Ignition 111/120/170 |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Canister combo DLE 120 cc |
1 x | Captador OS GT 33 cc |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | Motor DLE 65 cc |
1 x | Motor DLE 40 cc Twin |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | DLE 55 Muffler |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Ignition for ZG 20/26 |
1 x | Motor Moki S 400 cc 5 cylinders |
1 x | Flange gasket MOKI carburetor |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Reguladro ACTROCON 60A |
2 x | Hovercraft sailcloth |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Socket head ball link M3 (2 uds) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Short ball link M3 (6 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Socket head ball link M3 (2 uds) |
1 x | Ball link M3 (10 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Joint with bearing M3 22x5,5 |
1 x | BALSA trip 10x10x1000 mm |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | Oracover Yellow CUB 10 m |
1 x | PIX Hawk with accesories |
1 x | Fuel Fittings-Blue |
1 x | Fuel line plugs (Blue) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Servo Bolt M3x8 (8 pcs) |
1 x | Fuel line plugs (Red) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | 1/6 Pilot "Buddy" |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Allen wheel collar M3x3 |
1 x | Pitts Mufflers EME 70 cc (2 pcs) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Oratex Natural White 20m |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | LOWER TOW HOOK |
1 x | Fixed launching hook |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Micro flex hinge (12 uds) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Long ball link M1.6 (6 uds) |
2 x | Ring 320 mm length (5 pcs) |
2 x | Marker ties (20 pcs) |
2 x | |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Oratex Antik 2m |
1 x | Rubber profile 10-2 mm 2M |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 3 mm Prop Adapter M6 |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Ply-Span 450x600/13g Orange |
1 x | Rubber profile 8-2 mm 2M |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Fuel Fittings-Gold |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Servo NARO Max Std |
1 x | |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Jeti Advance Plus Program Card |
1 x | Support conector MPX (6 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Wire easy tensioner (silver) |
1 x | 1/12 Pilot "Tom" |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | 30 cm BEC cable (female) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Spinner INO 70 mm Chrome (Imitacion metal) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Motor EME 70 cc |
1 x | Pitts Mufflers EME 35 cc |
1 x | Oracover Orange 2 m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Oracover Red 2 m |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 2,5x60 mm allen screwdriver |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Allen wheel collar M3x5 |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Blades 330mm |
1 x | Tow hook for tug |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | PCI-HV ignition conversion set with Zenoah rubber plug cap for Z |
1 x | ZENOAH/ZG 20cc |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | 12 mm dogdrive props |
1 x | Motor ST 7-160 B |
1 x | Coupling for 4 mm axis |
|
19,856.91EUR |