Inicio » Catálogo » Motores y Turbinas » Turbinas » Queroseno » Turbinas XICOY » XIX95C

2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]

Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
  Turbinas->
    Queroseno->
      Accesorios
      Aceite
      Humo
      Recambio JETCENTRAL
      Turbinas Jet Central
      Turbinas Jetsmunt
      Turbinas KingTech
      Turbinas PBS
      Turbinas XICOY
    Eléctrica->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Estuche bolsa JETI DS
54.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

2 x	Cinta fibra vidrio 38 mm
2 x	Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x	Cinta fibra vidrio 25 mm
1 x	Sistema cierre Mini 14x60 mm (4 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 1.0 mm
2 x	Sistema cierre 330 mm con abrazadera (4 pcs)
2 x	Sistema cierre 400 mm con abrazadera (2 pcs)
2 x	Cinta tubuladora (5 m)
2 x	Soporte para bridas hasta 3 mm (0,12") para tornillo M3 (10 pcs)
1 x	Cinta Goldfix 1m
1 x	Sistema cierre 200 mm con abrazadera (2 pcs)
2 x	Sistema cierre negro doble cara 20x1000 mm
2 x	Sistema cierre 450 mm con abrazadera (2 pcs)
2 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
2 x	Sistema cierre 350 mm con abrazadera (2 pcs)
1 x	Sistema cierre 320 mm largo (5 pcs)
2 x	Bridas 1,66x71 / 0,07x2,8"mm (20 pcs)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link latón BS M3 V1 (10 pcs)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link M2 (10 pcs)
1 x	Sistema cierre baterías 20x200 mm
1 x	Cinta RUDDOG proteccion calor 2m x 50 mm
1 x	Sistema cierre HACKER 300 mm con abrazadera (2 pcs)
1 x	Abrazadera con letrero (20 pcs)
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Sistema cierre 300 mm con abrazadera (2 pcs)
1 x	Sistema cierre 480 mm con abrazadera (2 pcs)
1 x	Gancho remolque inferior plano
1 x	Gancho de lanzamiento fijo
1 x	Gancho de remolque hasta 4,5 m
1 x	Gancho de remolcador
2 x	Gancho de remolque hasta 3m
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
1 x	Chaqueta Hispano Aviación
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Conector BEC macho (10 pcs)
1 x	Cinta autoadhesiva 5 mm x 16.80m; Diente 0.5 mm
1 x	Bayoneta aluminio ø30×1 mm x 1m
1 x	Soporte para bridas de hasta 3 mm (10 pcs)
1 x	Polea de bronce 6/1,5 (2 pcs)
1 x	Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Polea de bronce 8/2 (2 pcs)
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	DINO Glider ARC
1 x	Planeador PIROL
1 x	Plancha contrachapado Abedul 600x300x6,0 mm
1 x	Bancada servo gancho
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x	Sistema para cables con tensor (negro)
1 x	Adaptador 3,2 mm M5 para cono 30 mm hélice fija.
1 x	Adaptador 3,0 mm M6 para cono 30 mm hélice pleg.
1 x	Telemetria XYCOY adapter
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Terminales riostras M3 (10 uds)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Disipador radial para motores MPJ AC 25/25-xx
1 x	Prisionero allen M3x3
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Disipador axial para motores MPJ AC 25/25-xx
1 x	Kwik link metálico M3 (10 uds)
1 x	Adaptador de hélice 3,2 mm M5
1 x	Adaptador de hélice 2 mm M5
1 x	Adaptador de hélice 5 mm M6
1 x	Turbina X45 H "Light Version"
1 x	Adaptador de hélice 5 mm M8
1 x	Prisionero allen M4x4
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Acoplador M2 (10 uds)
1 x	Tensor de riostras M3 33x49 (2pcs)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Sistema para cables con tensor (azul)
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Pîn 3,0 terminales riostras M3,0 ⌀ (6 pcs)
1 x	Terminales riostras M6x66 (2 uds)
1 x	Tensor de riostras M2,5x27/43 (2pcs)
1 x	Kwik link metálico con bola M3 (10 uds)

3,075.44EUR