Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Tape GFK 38 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 25 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 330 mm (4 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	Spikes Band (5 m)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 200 mm (2 pcs)
2 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring 450 mm (2 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 350 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	20x200 mm battery rings
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	LOWER TOW HOOK
1 x	Fixed launching hook
1 x	Towing hook
1 x	Tow hook for tug
4 x	Towing hook <3m
1 x	SE Ring 250 mm (2 pcs)
1 x	Softshell Hispano Aviación
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Conector BEC male (10 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Pulley brass 8/2 (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	DINO Glider ARC
1 x	Glider PIROL
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	SERVO HOLDER
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	wire tensioner (black)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 3,0 mm M6
1 x	Telemetria XYCOY adapter
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Cable coupler M3 (10 uds)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x
1 x	Metal clevis M3 (10 uds)
1 x	3,2 mm Prop Adapter M5
1 x	2 mm Prop Adapter M5
1 x	5 mm Prop Adapter M6
1 x	Turbina X45 H "Light Version"
1 x	5 mm Prop Adapter M8
1 x	Allen wheel collar M4x4
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	wire tensioner (blue)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Metal ball clevis M3 (10 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	PowerPack 2.5X2 PRO
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	TX 250 mW especial GOPRO
1 x	Cable video GoPro
1 x	Ventus 1:4 set of instruments

3,367.45EUR