Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak Modulo Glasses JETI
151.25EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Hélice POWER-PROP 7x7
2 x	Encendido GLOW 5C + accesorios
2 x	Encendido RCEXL Twin CM-6
2 x	Sistema de arranque a bordo (9713)
2 x	Encendido completo con captador para DLE 30
2 x	Arrancador EM Gear Power 80
2 x	Arrancador EM Gear Power 250
1 x	Encendido RCEXL A-02
2 x	Motor autoarranque EME 35cc
1 x	Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x	Alicate para hacer "Z"
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Cable servo PREMIUM 100m (blanco/rojo/azul)
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Prolongador silicona 100 cm (Graupner)
1 x	Cable servos silicona 0,35 mm2 Futaba (5 m)
1 x	Soporte para aviones SebArt
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Arandela de goma M3-M4 (8 pcs)
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Abrazadera 2.5x100 (20 uds)
1 x	Prolongador cable servo POWERBOX 75cm
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	PVC termo-retráctil batería 165 mm transparente (10 m)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Aceite para hacer humo 3l Smoke
2 x	Ball Link ALU M3 - RH (1 pcs)
2 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Iniciador FRX2 Wireless Receptor
1 x	Gafas Aspen
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Acoplador de aluminio para tubo de carbono 6/M4
1 x	Iniciadores para AX-60 (5 pcs)
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
1 x	Cartucho de humo Verde 140 g
1 x	Cable acero trenzado Ø 0,52 mm - 15 kp (10 m)
1 x	Cable acero trenzado Ø 0,5 mm (20 m)
1 x	Termo-retráctil verde tubo de 12,7x1000 mm 2:1
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Circlick seguridad
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Cable servo 5 lineas negro (1m)
1 x	Helice 8x4 Electric
1 x	Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Hélice MEJZLIK 20x10 Electric light (36 g)
1 x	Piloto 1/12 "Fighter"
1 x	Conector CAN 15
1 x	Piloto 1/6 "Cindy"
1 x	Conector JR Servo hembra (10 pcs)
1 x	Conector JR Servo macho (10 pcs)
1 x	Conector banana oro 5,5 mm
1 x	Autoarranque DLE55, EME55/60, DLA56, SE 55
1 x	Encendido para motor DLE 55
1 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x	Kwik link pequeño (10 pcs)
1 x	Sistema para cables (plata)
1 x	Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
2 x	Plancha para entelar mini
1 x	Sistema para cables con tensor (azul)
1 x	Roller cutter 28 mm
1 x	Helice KAVAN 32x12 2-Bl
1 x	Plancha entelar Std
1 x	Bird (Aero-naut)
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Encendido glow remoto más set para montaje interior
1 x	Soporte aluminio para encendido (azul)
1 x	Autoarranque EME35
1 x	PIT (Aero-Naut)
1 x	Bayoneta aluminio ø35×1.5 mm x 1m
1 x	Tubo de latón (L 1000 mm, Ø2,0 mm, Ø1,2 mm)
1 x	Rótula larga M3 con bola/tornillo (6 uds)
1 x	PVC termo-retráctil batería 195 mm transparente (1 m)
1 x	Bomba de vacio 12 CFM completa
1 x	Rótula con bola plana M3 (10 pcs)
1 x	Sistema para cables con tensor (rojo)
1 x	Oratex Natural White 2m
1 x	Sistema para cables con tensor (silver)
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x	Tubo ABS 5,0x4,0x1000 mm
1 x	Tensor de riostras M1,6x20/30 (2pcs)
1 x	Tubo ABS 20,0x18,0x1000 mm
1 x	PVC termo-retráctil batería 70 mm lila (10 m)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	PVC termo-retráctil batería 70 mm transparente (10 m)
1 x	Rótula MAXI con bola/tornillo M3 (2 uds)
1 x	Tubo ABS 7,0x6,0x1000 mm
1 x	Ply-Span 450x600/13g Naranja
1 x	Rótula MAXI con bola/saliente M3 (2 uds)
1 x	Alicate para hacer "Z"
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball link M2 (10 pcs)
1 x	Ply-Span 450x600/13g Negro
1 x	Tacometro Hyperion Multi-pala
1 x	Rótula M3 con tornillo y tuerca(6 uds)
1 x	Acoplador M2 (10 uds)
1 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Instrumentos individuales 1/4 Planeador
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Oracover ROYAL RED 2m
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Tubo ABS 3,0x2,0x330 mm
1 x	Rótula con bola M3 (10 pcs)
1 x	Plastilina para moldeado (1 Kg)
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Pincel Gr.5
1 x	Perforador hélices para DA50, DLE55 rojo
1 x	Molde conector MPX V1
1 x	Perforador hélices 5/6,3/8/9
1 x	Pincel laminar 10 mm (50 pcs)
1 x	Perforador hélices para DLE111 y DA85-150
1 x	Plancha para entelar
1 x	Programador HPP-21 PLUS HITEC digital servos PC

5,679.19EUR